GROVE GEAR NH8150019.00 NH-B815-30-R Worm Reducer, 30:1 Ratio, 0.625 Inch I.D, 0.75 Inch O.D, Cast Iron
Get it by Tuesday, Sep 1
€741.97 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Reducer |
| A | 2.57 |
| Assembly | B-R |
| B | 4.06 |
| C | 5" |
| Center Distance | 1.54" |
| D | 1.88 |
| F | 1.88 |
| G | 0.94 |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| Gearbox Type | Worm |
| Gross Weight | 0 lbs. |
| Housing Material | Cast Iron |
| I | 3.14" |
| Input Bore Size | 5/8" |
| Input Dia. | 5/8" |
| Input Hp | 63/100 hp |
| Input Hp @ 1750 Rpm | 63/100 hp |
| Input Keyway Size | 3/16" x 1.38" |
| Input Speed | 1750 RPM |
| Input Style | Solid Shaft |
| Input Type | Solid Shaft |
| J | 3 1/4" |
| K | 1.63" |
| M | 1.76 |
| Material | Cast Iron |
| Max. Ohl (output Shaft) | 860 |
| Max. Thrust Load (output Shaft) | 1144 |
| Mounting Type | Base |
| N | 4.25 |
| No. Of Gear Reductions | 1 |
| O | 2 14/25" |
| Output | Right |
| Output Dia. | 3/4" |
| Output Hp | 0.442 hp |
| Output Key Size | 3/16" x 1.5" |
| Output Shaft | Solid Shaft |
| Output Shaft Assembly Code | R |
| Output Shaft Dia. | 3/4" |
| Output Shaft Direction | Right |
| Output Shaft Orientation | R |
| Output Shaft Thrust Rating | 1144 |
| Output Shaft Type | Right Handed Shaft |
| Output Speed | 58 RPM |
| Output Style | R |
| Output Torque | 478 lbs.-in. |
| Output Type | Solid Shaft |
| Overhung Load | 860 lbs. |
| Overhung Load Rating | 860 lbs. |
| Paint/coating | Blue |
| Product Line | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Reduction | Single |
| Reduction Type | Single |
| Series | NH Series |
| Series Style | NH-B-R |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Speed | 58 RPM |
| Tap Depth | 0.63" |
| Tap Size | 5/16"-18 |
| Thread Type | Coarse |
| U | 5/8" |
Shipping Info:
| Ship weight (kg) | 6.75 |
| Ship height (cm) | 26.67 |
| Ship length (cm) | 27.15 |
| Ship width (cm) | 23.01 |
Product Variants
| Product | Model | Output Hp | Output Speed | Output Torque | Max. Input Hp | Input Dia. | Reducer Type | Input Bore Size | Speed | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
NH8150199.00 | 0.442 hp | 58 RPM | 478 lbs.-in. | 63/100 hp | 5/8" | Single | 5/8" | 58 RPM | €833.92 | |
|
NH8150107.00 | - | - | - | - | - | - | - | - | €448.20 | RFQ
|
|
NH8150103.00 | - | - | - | - | - | - | - | - | €448.20 | RFQ
|
 |
NH8150085.00 | 1.794 hp | 350 RPM | 323 lbs.-in. | 1.939 hp | 5/8" | Single | 5/8" | 350 RPM | €833.92 | |
 |
NH8150082.00 | 0.214 hp | 29 RPM | 462 lbs.-in. | 0.391 hp | 5/8" | Single | 5/8" | 29 RPM | €833.92 | |
|
NH8150108.00 | - | - | - | - | - | - | - | - | €448.20 | RFQ
|
 |
NH8150191.00 | 0.093 hp | 21 RPM | 269 lbs.-in. | 51/250 hp | 5/8" | Single | 5/8" | 21 RPM | €833.92 |
Explore Products
- MARATHON MOTORS 449TTFCD6528 E771A / 449TTFCD6528BB General Purpose Motor, 1800 RPM, 60 Hz, 460 V, 250 HP
- SMC VALVES SV2000-50-3A-C8 Valve Manifold
- GROTE 84-3382 Closed End Connector, 16-14 Ga
- PARKER 50CFRCDUMC026.000 Pneumatic Cylinder
- A.R. NORTH AMERICA 1013.0301.10 Spray Gun, w/EXT 3/8x22M 4000
- ANVIL 0500107388 Pipe Strap, 1 1/2 Inch Size
- BALDOR MOTOR SPM3558T Electric Motor, 2HP, 1765RPM, 3Phase, 60Hz
- SMC VALVES CKP1A50-125YALZ-P74ZS-X888 Clamp Cylinder
Explore More
- ALLSOURCE
- HYTORC
- KEYSHAFT
- SCHROEDER
- NANUK CASES
- Snips Shears And Scissors
- Disc Backup Pads
- Plates and Plate Covers
- Cable Ties
- O-Rings
- LEATHERHEAD TOOLS Ultra Force Irons Series, Halligan And Axes
- MECHANIX Carbon X Level 10 Heat Resistant Gloves
- LOC-LINE 90 Degree Nozzles For 1/4 Inch Systems
- ANVIL C150 Series Cable Eyelets
- GLOBE SCIENTIFIC Translucent Snap Caps, For 13 mm Tubes
- ITW Fitting Insulation 45 Elbow
- APPROVED VENDOR Water Heater Connector
- BLACKBURN (T&B) Bullet Hub Type Conduit FIttings
- VESTIL GR-F3R Series Structural Guard Rails, Orange, Bolt-On
- WONDER GRIP USA Knit General Purpose Gloves
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
GROVE GEAR NH8150019.00 NH-B815-30-R Worm Reducer, 30:1 Ratio, 0.625 Inch I.D, 0.75 Inch O.D, Cast Iron
€741.97 /unit