GROVE GEAR EL8260199.00 EL-BMQ826-30-R-140 Worm Reducer, 30:1 Ratio, 0.875 Inch I.D, 1.25 Inch O.D, Aluminum
Get it by Monday, Dec 22
€2,188.53 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Reducer |
| Assembly | BMQ-R |
| Center Distance | 2.63" |
| Frame | 140TC |
| Gear Type | Worm |
| Gearbox Type | Worm |
| Housing Material | Aluminum |
| Input Bore (c Face) | 7/8" |
| Input Bore Size | 7/8" |
| Input Dia. | 7/8" |
| Input Hp @ 1750 Rpm | 2 29/200 hp |
| Input Keyway Size (c Face) | 3/16" x 3/32" |
| Input Rpm | 1750 RPM |
| Input Style | C Face Quill |
| Material | Aluminum |
| Max Input Hp | 2 29/200 hp |
| Max. Input Hp | 2 29/200 hp |
| Mounting Type | Base |
| No. Of Gear Reductions | 1 |
| Output Diameter | 1 1/4" |
| Output Hp | 1.743 hp |
| Output Key Size | 1/4" x 1.62" |
| Output Rpm | 58 RPM |
| Output Shaft | Solid Shaft |
| Output Shaft Assembly Code | R |
| Output Shaft Dia. | 1 1/4" |
| Output Shaft Direction | Right |
| Output Shaft Orientation | R |
| Output Shaft Thrust Rating | 2091 |
| Output Shaft Type | Right Handed Shaft |
| Output Style | R |
| Output Torque | 1883 lbs.-in. |
| Overhung Load | 1625 lbs. |
| Product Line | EL Series - Aluminum Worm Gear Reducers |
| Reducer | Worm - Right Angle |
| Reduction Type | Single |
| Series | EL Series |
| Series Style | EL-BMQ-R |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Ships Factory Direct | No |
| Tap Depth | 0.69" |
| Tap Size | 3/8"-16 |
Shipping Info:
| Ship weight (kg) | 16.65 |
| Ship height (cm) | 29.85 |
| Ship length (cm) | 40.64 |
| Ship width (cm) | 31.12 |
Product Variants
| Model | Max. Input Hp | Frame | Output Torque | Output Shaft Type | Gear Type | Overhung Load | Input Rpm | Output Shaft Dia. | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| EL8260231.00 | 4.492 hp | 180TC | 1475 lbs.-in. | Right Handed Shaft | Worm | 1625 lbs. | 1750 RPM | 1 1/4" | €2,188.53 | |
| EL8260200.00 | 1.695 hp | 140TC | 1854 lbs.-in. | Right Handed Shaft | Worm | 1625 lbs. | 1750 RPM | 1 1/4" | €2,188.53 | |
| EL8260237.00 | 1 21/50 hp | 180TC | 1843 lbs.-in. | Right Handed Shaft | Worm | 1625 lbs. | 1750 RPM | 1 1/4" | €2,188.53 | |
| EL8260238.00 | 1 27/125 hp | 180TC | 1805 lbs.-in. | Right Handed Shaft | Worm | 1625 lbs. | 1750 RPM | 1 1/4" | €2,188.53 | |
| EL8260239.00 | 0.577 hp | 180TC | 1092 lbs.-in. | Right Handed Shaft | Worm | 1625 lbs. | 1750 RPM | 1 1/4" | €2,188.53 | |
| EL8260202.00 | 1 27/125 hp | 140TC | 1805 lbs.-in. | Right Handed Shaft | Worm | 1625 lbs. | 1750 RPM | 1 1/4" | €2,188.53 | |
| EL8260234.00 | 2.487 hp | 180TC | 1869 lbs.-in. | Right Handed Shaft | Worm | 1625 lbs. | 1750 RPM | 1 1/4" | €2,188.53 |
Explore Products
- PARKER P32CM92GEMNGCMW Filter/Regulator, 3/8 Inch, 125 Psi
- APPROVED VENDOR U08210.075.0100 Hex Head Cap Screw, 3/4 In - 10 Thread Size, Steel, 1 In Lg., 15/32 In Head Ht., Gr. 2
- ASHCROFT 451259SD04LXCYDJ30/0IMV-04510SS50XDJ Vacuum Gauge, -30 To 0 Psi, 4 1/2 Inch Dial, 1/2 Inch Npt Male, Bottom
- GRAINGER M-65012 Hand Knob, 4 Point, Stainless Steel, 5/16 Thread Size, Unthreaded Reamed Hole
- BUNTING BEARINGS EBCF060804 Flange Sleeve Bearing, 3/8 Inch I.D., 1/2 Inch O.D., 1/2 Inch Length, Bronze
- BRADY 7091-4-PK 172930 Pipe Marker, Drain, Yellow, Black, Fits 3/4 to 2 3/8 Inch Pipe OD, 4 Pipe Marker
- FABORY U22551.112.0550 Fully Threaded Stud, 1 1/8 In - 8 Thread Size, Steel, 5 1/2 In Lg., Gr. B16, Plain, Coarse
- CALDWELL 430-.5-10 Fixed Spread Lifting Beam, 1000 lbs. Load Limit, 120 Inch Max. Spread
Explore More
- KEYSHAFT
- NELSON STUD WELDING INC.
- VNE STAINLESS
- YALE
- MAGSWITCH
- Hazardous Location Manual Motor Switches and Starters
- Industrial and Commercial Dehumidifiers
- Paint Shields and Trim Guides
- Protector Cases
- LOC-LINE Male NPT Valves
- ABUS Lockout Padlock, Keyed Different
- VIEGA PROPRESS Tailpiece, Press x Female Union
- ACME ELECTRIC Three Phase Dry Type Distribution Transformers, 600V Delta Primary Volts, 208Y/120 Tap Secondary Volts
- GLOBE SCIENTIFIC Screwcaps with O-Ring, for Sample Tubes
- OSG General Purpose Roughing/Finishing Carbide Corner Radius End Mills
- OSG Carbide Double End Square End Mills
- ANVIL AS150H Series Channels With Holes
- DEHN Insulating Sticks
- SIOUX CHIEF Add-A-Rods
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
GROVE GEAR EL8260199.00 EL-BMQ826-30-R-140 Worm Reducer, 30:1 Ratio, 0.875 Inch I.D, 1.25 Inch O.D, Aluminum
€2,188.53 /unit