With over 80 years of experience, Little Giant has been manufacturing in-line & submersible water pumps for plumbing applications in the HVAC, irrigation, flood control, wastewater and marine industries. These pumps from Little Giant are designed for pumping and transferring liquids from one area to another. Read More
Little Giant E Series effluent pumps feature thermoplastic / stainless steel discharge and motor brackets to protect from damage caused by metals and minerals. These pumps are equipped with ceramic bearing sleeves for noise reduction & long life and carbon phenolic upthrust washers to prevent uncontrolled wear.
Little Giant simplex & duplex grinder pumps are designed for superior cutting action & grinding up to 414000 cuts per minute. They feature a powerful, single phase motor for grinding domestic sewage and an epoxy coated cast iron body for durability & corrosion resistance.
Little Giant high head effluent pumps are used to supply wastewater or treated effluent from an aerobic treatment system to a spray, drip and mound irrigation system. These pumps feature an impeller made of Celcon / composite materials for high coefficient of linear thermal expansion and increased structural rigidity.
Little Giant sink pump systems are used to remove wastewater from impractical drainage areas, such as under sinks and laundry trays. They have thermal overload protection and a compact design for confined space applications.
Little Giant submersible sewage pumps comprise a wide range of manual and automatic submersible pumps in variants ranging from 0.4 to 2 hp. They feature vortex impellers to prevent clogging and are ideal for effluent & wastewater transfer.
Little Giant submersible sump pumps drain water from basement sump pits and work completely underwater, at the bottom of the sump. These pumps are submerged in water to cool down pump motors & prevent them from overheating, thus enhancing their life.
Little Giant corrosion resistant and seamless sump basins & sump basin covers are made of polyethylene. They are used to hold a sump pump to remove accumulated water.
Little Giant sump / battery backup systems are used to supplement primary pumps by giving several hours of additional protection from water damage, when the primary pump fails due to power outages or mechanical failures. They feature deep cycle & maintenance free marine / solar / lead acid batteries.
Little Giant simplex sewage and wastewater removal systems are designed to reduce water intrusion and switch failure. They feature an automatic piggyback mechanical float switch and are used in applications where gravity drainage is not possible.
Used to drain standing water from shallow areas and feature non-clog impellers and single-phase thermally protected motors. Available in different materials, current ratings and flow rates
Little Giant jet pumps are designed for supplying pressurised fresh water to rural farms, homes and cabins. They feature a seal plate & cast iron casing for long life and durability. The tank's butyl rubber diaphragm system keeps the air charge away from water in the system.
Little Giant shallow well jet pumps are used for supplying pressurised fresh water to rural homes, farms and cabins. They feature a condensation reducing design integrated with a steel tank, cast iron casing and a seal plate for a long life.
Little Giant injector kits are ideal for both shallow and deep well installations. They can also be used for installing JPC Series convertible jet pumps in farms and cabins.
Little Giant BT4 booster pumps are designed to help boost pressure in applications involving water & chemicals. They feature a symmetrical design for easy horizontal or vertical mounting and easy to use, flow based controls to ensure consistent pressure at all times.
Little Giant chemical resistant & submersible centrifugal pumps are used for water transfer / recirculation applications in water displays, air conditioners & machine tools. These NK-1 & NK-2 Series, oil-filled & direct-drive submersible pumps come with nylon housing, a fluoroelastomer (FKM) shaft seal & a polyethylene screen.
Little Giant CSA recognised universal ice machine pumps feature a 1/25 hp motor with thermal overload protection and a stainless steel shaft. They have NSF listed ABS volute, base and discharge adapters.
Little Giant self priming pumps are designed to offer instant water delivery or dewatering services at heights up to 6 ft (1.8 m). They feature a non submersible, stainless steel / plated brass pump body with a heavy duty metallic handle. They also come with dual threaded intake and discharge ports.
Includes a variety of Little Giant pond pumps and fountain pumps, used to ensure proper water movement and regulate oxygen supply in ponds. Available in different housing and impeller materials
LGRM Series deep well injectors designed for pumping water from depths ranging b/w 25 and 110 ft. Feature screw-in injectors for easy conversion from shallow- to deep-well installation, mechanical shaft seals for continuous water lubrication & leak-proof fit and adjustable pressure switch to choose between 30 and 50 psi pressures
UR-listed coolant pumps used in evaporative coolers, laboratories and various water transfer applications. Feature a corrosion-resistant one-piece steel motor shaft with moisture proof windings and a flame-retardant housing
Includes a wide range of submersible parts washer pumps with corrosion-resistant housings. Available in different voltage and hp ratings
Direct-acting and in-line control switches used to control various effluent, sump and sewage pumps. Include a float, a cord with a plug, a mounting strap and two adjustable mounting clamps. Available in auxiliary condensate, auxiliary safety and diaphragm variants
Includes a wide range of replacement condensate pump parts, such as check valves (for 1-ABS or 2EC-SPT / VCC / VCMA and VCL-24 / VCL-45ULS Series pumps) and vinyl tubings
Designed for removing condensate (water) from air conditioners, condensing boilers, refrigerators & gas furnaces. Comprise a thermal overload protected motor to protect the sensitive components from excessive temperatures
Used to remove water quickly from pool covers, rooftops, construction sites and basements. Feature a glass-filled polypropylene housing, a nitrile shaft seal and a 1/3 hp permanent split capacitor motor
Leak-proof & heavy-duty magnetic drive pumps designed for circulating industrial chemicals and solvents. Feature an open-fan motor with thermal overload protection and eliminate friction loss, wear & contamination caused due to seals
Nickel-plated utility pumps featuring a totally enclosed non-ventilated motor, a stainless steel shaft, a Buna-N impeller and a seal. Used in instant water transfer and dewatering applications (up to 6 ft)
Used to keep the pond surface free of grass, leaves and floating debris. Have a high-density polyethylene skimmer body, a large pump chamber and a maximum flow capacity of 10000 gallons per hour
Designed for remote dewatering, water removal and fluid transfer applications. Safely handle petroleum fuels, lubricating oils and water based solutions. Feature a neoprene hose with a straight spout for suction lift up to 20 ft
The Little Giant Pumps catalogue comprises water garden, sewage, sump, utility, effluent, condensate removal & duplex grinder pumps and low pressure sewer system pumps. Little Giant Pumps VCMA-20 Series condensate removal pumps are ideal for removing condensate from condensing boilers, air conditioners, dehumidifiers & refrigerated display cabinets. These BAU, CE & TUV approved pumps feature a fully automatic Start / Stop safety switch and removable barbed check valve to reduce the risk of contamination & keep the system clean. They come with a thermally protected, 1/30 HP motor to operate at liquid temperatures up to 50 degrees C and an impeller made of glass filled polypropylene for high flexural strength & low friction. They are available in voltages ranging between 115 and 230V. The brands duplex grindersare ideal for superior cutting action and grinding 414000 cuts per minute. These grinders feature a 2 hp, single phase motor (3450 rpm) with in-built overload protection to prevent over-temperature & over-current damage. They have an epoxy coated, cast iron body for durability & corrosion resistance. They are equipped with a 4 inch, Adapt-A-Flex inlet grommet which provides a water & vapour seal on flat / curved surfaces. A wide range of duplex grinders, coolant tanks, float switches & electric sprayer pumps is available on Raptor Supplies.
Little Giant Pumps' MPNs (manufacturer's part numbers) generally cross individual references to the equivalent Dayton model numbers. So, if you are looking for a competitor pump system that is either out of stock or obsolete, chances are Raptor Supplies has the equivalent Little Giant pump available. Customers can also cross reference most of these tools using the last 5 digits of the model numbers.
These Little Giant pumps are heavy products. They require careful packaging as some products might get damaged while shipping. Hence, these Little Giant pumps are delivered by courier shipment and air freight for minimum downtime.
Little Giant WRS Series Drainosaur and Drainosaur Jr. offer a conveniently sized tank & pump combo, especially designed for impractical gravity drainage places. These compact systems help remove water...Read more
The compact and robust 5-MSP Series utility pumps are engineered for continuous duty operations where water transfer, removal or circulation is needed. These Little Giant pumps are equipped with a durable, nylon constructed impeller to convert mechanical power into pump power output. Multiple switch options are provided for automatic operation, thus ensuring application flexibility. They have cast aluminium construction to resist corrosion.
Little Giant submersible sump pumps are designed for removing standing / accumulated water from a sump basin in a basement or crawl space, and transfer water to the sewer line. These units have stainless steel housing for handling corrosive fluids and a semi open impeller design for handling liquids with solid particles. They are completely submerged underwater and start the motor automatically when the sump pit water rises to a dangerous level and stop the pump when the water has drained down to normal levels.
Little Giant Pump Company occupies seven buildings in Oklahoma City, totaling more than 400000 sq.ft, for manufacturing submersible pumps.
A submersible pump is ideal for draining a pool. These submersible pumps operate while fully submerged in water and drain water safely from swimming pools.
Little Giant sump pumps work well for approximately 10 years, but users might not notice defects in sump pumps until the units stop working completely.
Generally, Little Giant sump pumps are capable of operating for 6 to 24 hours continuously, depending on the intensity of rainfall and the quality of the pump.