FREE delivery on orders over €150
Product Specifications:
| Item | Shaft Oil Seal |
| Case Coating | None |
| Contact Type | Contact Seal |
| For Fluid Type | Alcohol, Automatic Transmission Fluid, Cutting Oil, E.P. Lubricants, Engine Oil, Gasoline, Gear Oil, Grease, Hydrochloric Acid Solution, Light Oil/Kerosene, Machine Oil No.2, Petroleum Base Lubricating Oil, Sulfuric Acid Solution, Turbine Oil No.2, Water-Glycol |
| Hardness | 45 HRC @ 4 M/S And 55 HRC @ 10 M/S |
| Inside Dia. | 200 mm |
| Lip Material | Nitrile Rubber |
| Max. Pressure | 7 psi |
| Max. Temp. | 250°F |
| Min. Temp. | -40°F |
| No. Of Lips | 1 |
| Outside Dia. | 250 mm |
| Overall Width | 15 mm |
| Seal Design | SA |
| Seal Type | Single Lip Seal |
| Spring Reinforcement | Yes |
| Spring Type | Garter |
| System Of Measurement | Metric |
Shipping Info:
| Ship weight (kg) | 1.35 |
| Ship height (cm) | 1.5 |
| Ship length (cm) | 25 |
| Ship width (cm) | 25 |
Product Variants
| Model | Inside Dia. | Outside Dia. | Overall Width | Lip Material | Seal Type | Seal Design | Max. Pressure | No. Of Lips | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 10012010SA | 100 mm | 120 mm | 10 mm | Nitrile Rubber | Single Lip Seal | SA | 7 psi | 1 | €52.46 | |
| 10012012SA | 100 mm | 120 mm | 12 mm | Nitrile Rubber | Single Lip Seal | SA | 7 psi | 1 | €62.95 | |
| 10012513SA | 100 mm | 125 mm | 13 mm | Nitrile Rubber | Single Lip Seal | SA | 7 psi | 1 | €52.46 | |
| 10013013SA | 100 mm | 130 mm | 13 mm | Nitrile Rubber | Single Lip Seal | SA | 7 psi | 1 | €80.32 | |
| 10013015SA | 100 mm | 130 mm | 15 mm | Nitrile Rubber | Single Lip Seal | SA | 7 psi | 1 | €52.46 | |
| 10014013SA | 100 mm | 140 mm | 13 mm | Nitrile Rubber | Single Lip Seal | SA | 7 psi | 1 | €52.46 | |
| 10212513SA | 102 mm | 125 mm | 13 mm | Nitrile Rubber | Single Lip Seal | SA | 7 psi | 1 | €55.43 |
Explore Products
- PIP 09-K1600/XXL Hand Protection Cut Resistant Gloves, 2XL, Gray, Dozen
- IGUS ZLW1080S-8 Linear Actuator Assembly, 90mm Wide, 800mm Travel, Toothed Belt, 70mm Pitch
- GATES 1120L10 Micro-V Belt, L Section
- APPROVED VENDOR U55000.087.0225 Hex Head Cap Screw, 7/8 In - 9 Thread Size, SS, 2 1/4 In Lg., 35/64 In Head Ht.
- EATON 47-51963-1 Dry Type Distribution Transformer Accessory, Side Panel
- AIGNEP 88000-53-04 Tube Fitting, Straight Male, 5/32 Inch Tube x 1/4 Inch NPTF
- BRADY 23405 Numbered Tag, Brass, 1 1/2 Inch Dia, Cold Water, 226-250, Brass, 0.04 Inch Thick, Round
Explore More
- COUNCIL TOOL
- JOHN GUEST
- KEYSHAFT
- SPEEDCLEAN
- W F HARRIS LIGHTING
- Trash Compactors
- Defrost Thermostat
- Air Conditioner Compressors
- Motorized Impellers
- Built-in Locker Locks
- AKRO-MILS 35300 Nest And Stack Totes
- DWYER INSTRUMENTS DH Series Digihelic Differential Pressure Controllers
- CONDOR Coated Gloves, Nitrile, Palm/Full Dotted/Double Dipped
- LOUISVILLE FM1500 Series Fiberglass Twin Front Ladders
- ULTRATECH Roof Leak Diverter
- CEMENTEX USA Screw Holding Slotted Screwdrivers
- SUPCO Round Run Capacitors
- WON H25 Series Standard Bearing Blocks
- BALDWIN ESTATE Keyed R032 Arch Roses
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
DDS 20025015SA Rotary Shaft Oil Seal, Sa, Nitrile, 200 mm ID, 250 mm Od, 15 mm Width
€233.11 /unit

