FREE delivery on orders over €150
Product Specifications:
| Item | Shaft Oil Seal |
| Case Coating | None |
| Contact Type | Contact Seal |
| For Fluid Type | Alcohol, Automatic Transmission Fluid, Cutting Oil, E.P. Lubricants, Engine Oil, Gasoline, Gear Oil, Grease, Hydrochloric Acid Solution, Light Oil/Kerosene, Machine Oil No.2, Petroleum Base Lubricating Oil, Sulfuric Acid Solution, Turbine Oil No.2, Water-Glycol |
| Hardness | 45 HRC @ 4 M/S And 55 HRC @ 10 M/S |
| Inside Dia. | 100 mm |
| Lip Material | Nitrile Rubber |
| Max. Pressure | 7 psi |
| Max. Surface Speed | 999 mps |
| Max. Temp. | 250°F |
| Min. Temp. | -40°F |
| No. Of Lips | 1 |
| Outside Dia. | 120 mm |
| Overall Width | 10 mm |
| Seal Design | SA |
| Seal Type | Single Lip Seal |
| Spring Reinforcement | Yes |
| Spring Type | Garter |
| System Of Measurement | Metric |
Shipping Info:
| Ship weight (kg) | 0.79 |
| Ship height (cm) | 1 |
| Ship length (cm) | 12 |
| Ship width (cm) | 12 |
Product Variants
| Model | Inside Dia. | Outside Dia. | Overall Width | Lip Material | Seal Type | Seal Design | Max. Pressure | No. Of Lips | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 10012012SA | 100 mm | 120 mm | 12 mm | Nitrile Rubber | Single Lip Seal | SA | 7 psi | 1 | €62.95 | |
| 10012513SA | 100 mm | 125 mm | 13 mm | Nitrile Rubber | Single Lip Seal | SA | 7 psi | 1 | €52.46 | |
| 10013013SA | 100 mm | 130 mm | 13 mm | Nitrile Rubber | Single Lip Seal | SA | 7 psi | 1 | €80.32 | |
| 10013015SA | 100 mm | 130 mm | 15 mm | Nitrile Rubber | Single Lip Seal | SA | 7 psi | 1 | €52.46 | |
| 10014013SA | 100 mm | 140 mm | 13 mm | Nitrile Rubber | Single Lip Seal | SA | 7 psi | 1 | €52.46 | |
| 10212513SA | 102 mm | 125 mm | 13 mm | Nitrile Rubber | Single Lip Seal | SA | 7 psi | 1 | €55.43 | |
| 10512015SA | 105 mm | 120 mm | 15 mm | Nitrile Rubber | Single Lip Seal | SA | 7 psi | 1 | €53.23 |
Explore Products
- CLEVELAND C08866 2510 Taper Length Drill Bit, 43/64 Inch Drill Bit Size, 43/64 Inch Shank Dia
- APPLETON ELECTRIC MLSL504J1GMT High Pressure Sodium Fixture
- VULCAN HART 704246 End Right Std Skel
- EATON E57G-30SPC10-Q Inductive Proximity Sensor, 30Mm, Dc, Shielded, 10Mm Sn
- T&S HG-2D-60 Gas Hose, Free Spin Fittings, 3/4 Inch NPT, 60 Inch Long
- NTN SUCPA207-23 Mounted Ball Bearing 1-7/16 Inch Bore
- SPEARS VALVES P601-241C Wye, Hub x Hub x Hub, 2 x 1-1/2 x 1-1/2 Size, CPVC
- INGERSOLL-RAND 90732 Rod
Explore More
- AKRO-MILS
- CONTINENTAL
- KEYSHAFT
- STREAMLIGHT
- UEI TEST INSTRUMENTS
- Pin Terminals
- Pedestal Pumps
- Eyewear Retainers
- Cork Roll Stock
- AKRO-MILS 35240 Nest And Stack Totes
- WHIZARD Metalguard Cut Resistant Sleeves
- PROTO Impact Socket, 6 Point, 3/8 Inch Drive, Metric
- VELCRO Reclosable Fastener Tape
- WESTWARD High Speed Steel Spiral Point Tap, Uncoated Finish
- BALDOR MOTOR Washdown Duty Motors, Three Phase, Totally Enclosed, Paint Free
- LYON Pallet Rack Kits
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
DDS 10012010SA Rotary Shaft Oil Seal, Sa, Nitrile, 100 mm ID, 120 mm Od, 10 mm Width
€52.46 /unit

