FREE delivery on orders over €150
DAYTON 5URA0 Brake End Mount Torque 3 Ft-lb Dripproof
Item: AE6QZYModel: 5URA0
7 In Stock
Ships within 2 days via
5.00% off
€1,088.49 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Brake |
| Ambient (c) | 40 Degrees |
| Amps Holding | 0.3/0.2 |
| Application | Brake Attaches To The Accessory End Of A Motor To Stop And Hold The Motor Shaft |
| Brake Mouting Position | Horizontal |
| Clutch/brake Type | End Mount Disc |
| Coil Voltage | 95/174-190V AC @ 50 Hz, 115-208/230V AC @ 60 Hz |
| Continuous Duty | Yes |
| Converts | Motor To A Brake Motor |
| Dia. | 6 1/2" |
| Duty Cycle | Continuous |
| Enclosure Type | Dripproof |
| Finish | Primed |
| Frequency | 50/60 Hz |
| Function | Stops And Holds A Motor Shaft From Rotating |
| Holding Amps | 0.3/0.2A |
| Housing Material Finish | Red Primer |
| Hp @ Speed | 1 hp @ 3450 RPM, 1/2 hp @ 1725 RPM |
| Included | Brake And Instruction Manual |
| Inrush Amps | 6.7/3.4 |
| Inrush Amps | 6.7/3.4A |
| Keyseat Size | 3/16" x 3/32" |
| Keyseat Size (in.) | 3/16 x 3/32 |
| Keyway Depth | 3/32" |
| Keyway Width | 3/16" |
| Length | 4" |
| Lever Release | Manual |
| Lever Type | Manual Release |
| Max. Ambient Temp. | 40°C |
| Max. Bore | 5/8" |
| Max. Hp @ 1725 Rpm | 1/2 |
| Max. Hp @ 1725 Rpm | 1/2 hp |
| Max. Hp @ 3450 Rpm | 1 |
| Max. Hp @ 3450 Rpm | 1 hp |
| Max. Speed | 3600 RPM |
| Mounting Location | 56C Motor Flange |
| Mounting Orientation | Horizontal |
| Mounts On | 56C Motor Flange |
| Nema/iec Frame | 56C |
| Outside Dia. | 6 1/2" , 6.5" |
| Overall Length | 4" |
| Overall Width | Not Applicable |
| Phase | 1 |
| Power Lead Length | 18" |
| Power Lead Length (in.) | 18 |
| Service Factor | 1.4 |
| Shaft Dia. | 5/8" |
| Static Torque | 3 Ft.-Lb. |
| Static Torque | 3 lbs.-ft. |
| Type | End Mount Disc |
| Voltage @ 50 Hz | 95/174-190 |
| Voltage @ 60 Hz | 115/208-230V |
Shipping Info:
| Ship weight (kg) | 3.39 |
| Ship height (cm) | 21.84 |
| Ship length (cm) | 19.56 |
| Ship width (cm) | 19.05 |
| HS code | 8505908000 |
| Country of Origin | US |
Product Variants
| Model | Static Torque | Max. Hp @ 3450 Rpm | Voltage @ 60 Hz | Max. Bore | Max. Hp @ 1725 Rpm | Nema/iec Frame | Type | Frequency | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 5URA1 | 3 lbs.-ft. | 2 hp | 115/208-230V | 5/8" | 1 hp | 56C | End Mount Disc | 50/60 Hz | €1,027.26 | |
| 5URA2 | 3 lbs.-ft. | 3 hp | 115/208-230V | 7/8" | - | - | End Mount Disc | 50/60 Hz | €1,074.99 | |
| 5URA3 | 15 lbs.-ft. | 5 hp | 115/208-230V | 7/8" | 3 hp | 143/145TC | End Mount Disc | 50/60 Hz | €1,061.00 | |
| 5URA4 | 3 lbs.-ft. | 1 hp | 208-230/460V | 5/8" | 1/2 hp | 56C | End Mount Disc | 50/60 Hz | €1,059.37 | |
| 5URA5 | 6 lbs.-ft. | 2 hp | 208-230/460V | 5/8" | 1 hp | 56C | End Mount Disc | 50/60 Hz | €1,085.83 | |
| 5URA6 | 10 lbs.-ft. | 3 hp | 208-230/460V | 7/8" | 2 hp | 143/145TC | End Mount Disc | 50/60 Hz | €1,084.93 | |
| 5URA7 | 15 lbs.-ft. | 5 hp | 208-230/460V | 7/8" | 3 hp | - | End Mount Disc | 50/60 Hz | €1,057.57 |
Explore Products
- PHILIPS ADVANCE IZT2S28D35M Fluorescent Ballast, Electronic, Dimming, 2 Lamp, 120 To 277 VAC, 28W Lamp
- OSG 4702100 Square End Mill, Bright, Center Cutting, 4 Flutes, 7/8 Inch Milling Dia.
- REGAL 030531AA Drill Bit, #24 Dia, 0.1520 Decimal Equivalent, Type B, Black Oxide
- ADVANCE TABCO CR-42X36-7-R
- MAIN FILTER INC. MF0096049 930119 Interchange Hydraulic Filter, Glass, 25 Micron, Viton Seal, 8.22 Inch Height
- OSG 1725305 Spiral Point Tap, 7/8 Inch - 14 Thread Size, 1 5/16 Inch Thread Lg, TiN, H4, Plug
- BOSTON GEAR 11288 Change Gear, Diametral Pitch 10, Teeth 32, Pressure Angle 14.5 Degree
- PARKER 11943-12-10 Hydraulic Crimp Fitting, Steel x Steel, 90 Deg Elbow, 10 Hose Dash Size
Explore More
- KEYSHAFT
- PRESCO PRODUCTS CO
- SHARON PIPING
- KLEENGUARD
- MCQUAY DAIKIN
- Gas Vent Pipe
- Cable Tie Tools
- Gas Connector Fitting
- Waterfall Filters and Pond Skimmers
- Drum Dispensers
- LOC-LINE In-line Check Valve
- AKRO-MILS 33223 Akro Grid Dividable Plastic Storage Boxes
- IRONCLAD EXO Impact Resistant Gloves
- FERNCO 1056 Series Stock Couplings
- JOHN GUEST Metric Union Connectors, Acetal Black
- NORDFAB Duct Clamps
- ELDON JAMES Tubing, 1/4 inch, 100 feet
- TENNSCO Imperial Boltless Shelving Starter
- ENERPAC PTW Series Pneumatic Torque Wrenches
- GLOBE SCIENTIFIC Bottle Top Dispensers
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
DAYTON 5URA0 Brake End Mount Torque 3 Ft-lb Dripproof
€1,145.78 /unit