DAYTON 1LPK2 Dc Gearmotor 58 Rpm 12v Tenv
58 RPM
1/10 hp
Get it by Tuesday, Jun 30
€ 24,99 Flat Shipping + VAT € 24,99 flat shipping is applicable on orders with an aggregate weight less than 10kg. Orders exceeding 10kg will be charged default shipping rates.
5.00% off
€630.99 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | DC Gearmotor |
| Bearing Type | Ball On Motor, Porous Bronze Sleeve On Case |
| Brush Type | Externally Replaceable |
| Finish | Unpainted |
| Full Load Amps | 9A |
| Gear Case | Die Cast Zinc |
| Gear Case Material | Die Cast Zinc |
| Gear Material | Hardened Steel, Phenolic |
| Gear Ratio | 55:1 |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Mounting Position | All Angle |
| Gearmotor Shaft Orientation | Parallel |
| Gearmotor Shaft Type | Single |
| Housing Material | Die Cast Zinc |
| Housing Material Finish | Unpainted |
| Input Hp | 1/10 hp |
| Key Way Size | #605 |
| Keyway Type | Woodruff #605 |
| Length Less Shaft | 8 1/2" |
| Lubrication | Grease Filled |
| Max. Ambient Temp. | 40°C |
| Max. Torque | 75 lbs.-in. |
| Motor Enclosure | Totally Enclosed Non Ventilated |
| Motor Type | Permanent Magnet DC |
| Mounting | All Position |
| Mounting Orientation | Any Angle |
| Nameplate Speed | 58 RPM |
| Operating Voltage | 12V DC |
| Output Shaft Dia. | 3/4" |
| Output Shaft Length | 1 1/2" |
| Overall Length | 10" |
| Overhung Load | 250 lbs. |
| Overhung Load Capacity | 250 lbs.-ft. |
| Replaceable Motor Brushes | Yes |
| Reversible Shaft Output | No |
| Rotation | CW, CCW |
| Seal Type | O-Ring Type On Output Shaft |
| Shaft | Single Output |
| Shaft Dia. | 3/4" |
| Shaft Length | 1 1/2" |
| Shaft Orientation | Parallel |
| Speed | 51-75 RPM |
| Tachometer Feedback | No |
| Thermal Protection | No |
| Voltage | 12V DC |
Shipping Info:
| Ship weight (kg) | 6.27 |
| Ship height (cm) | 16.76 |
| Ship length (cm) | 37.59 |
| Ship width (cm) | 21.08 |
| HS code | 8501314000 |
| Country of Origin | US |
Product Variants
| Model | Max. Torque | Input Hp | Overhung Load Capacity | Gear Ratio | Full Load Amps | Overall Length | Gear Case | Gear Material | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1LPK1 | 50 lbs.-in. | 1/10 hp | 250 lbs.-ft. | 38:1 | 9A | 10" | Die Cast Zinc | Hardened Steel, Phenolic | €691.90 | |
| 1LPK3 | 75 lbs.-in. | 1/10 hp | 250 lbs.-ft. | 38:1 | 6.2A | 10" | Die Cast Zinc | Hardened Steel, Phenolic | €667.97 | |
| 1LPK4 | 150 lbs.-in. | 1/15 hp | 250 lbs.-ft. | 81:1 | 6.2A | 10" | Die Cast Zinc | Hardened Steel, Phenolic | €666.18 | |
| 1LPK7 | 250 lbs.-in. | 1/15 hp | 250 lbs.-ft. | 135:1 | 6.2A | 10" | Die Cast Zinc | Hardened Steel, Phenolic | €667.97 | |
| 1LPK9 | 500 lbs.-in. | 1/15 hp | 250 lbs.-ft. | 267:1 | 6.2A | 10" | Die Cast Zinc | Hardened Steel, Phenolic | €665.24 | |
| 1LPV3 | 13 lbs.-in. | 1/15 hp | 50 lbs.-ft. | 267:1 | 2.1A | 6.38" | Die Cast Zinc | Hardened Steel, Phenolic | €546.11 | |
| 1LPV4 | 26 lbs.-in. | 1/30 hp | 50 lbs.-ft. | 62:1 | 2.1A | 6.38" | Die Cast Zinc | Acetyl, Steel | €535.38 |
Explore Products
- CENTURY H697V1 Condenser Fan Motor, Face Mount, Totally Enclosed Air-Over, 1-1/2 Hp, 1, 140 Nameplate Rpm
- REGAL 029144AS53 Hand Tap, M14 x 1.5 Size, D6 Limit, 4 Flutes, Taper, Left Hand With Nitride & Steam Oxide
- CLEVELAND C41609 Square End Mill, Center Cutting, 2 Flutes, 5/16 Inch Milling Dia, 9/16 Inch Cut
- PETERSEN PRODUCTS 939-036-KIT Insertion Kit, 72 Inch Launch Cylinder, 12 Inch Flange Size
- WINSMITH E26CDBS32000FA Speed Reducer, 143-145TC/182-184C Motor Frame, 3-Piece Coupled Input Output Shaft
- APPLETON ELECTRIC MLEDNS405P5BU Led Light Fixture, 400W
- 80/20 25-2129-BLACK Black 25 x 50 mm Base Plate, M8 Tap In Center
- MAIN FILTER INC. MF0423677 SF86A112NO Interchange Hydraulic Filter, Wire Mesh, 125 Micron Rating, Seal, 5.472 Inch Height
Explore More
- KEYSHAFT
- Coaxial Cables
- Differential Pressure Gauge Accessories
- Hoist Rings And Accessories
- Bolt On Miniature Circuit Breakers
- Hydronic Kickspace Heater Cabinets
- HELICOIL Complete Gages, Metric Coarse, 4H5H
- RINGERS GLOVES Form Fitting Lightweight Tactical Gloves
- SUGATSUNE Edge Pull Handles
- WERA TOOLS Pre-set Torque Screwdriver
- KIPP K0270 Series, 1/4-20 Thread Size Adjustable Handles
- BRANSON Sonifiers
- HUOT Workstations
- DAYTON Retainers
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
DAYTON 1LPK2 Dc Gearmotor 58 Rpm 12v Tenv
€664.20 /unit