CLEVELAND C52177 End Mill Cobalt 11/32 4 Flutes Double Square End Cc
Get it by Tuesday, Jul 7
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Cobalt End Mill |
| Chip Breaker | No |
| Cutting Direction | Right Hand |
| Cutting Direction-machining | Right Hand |
| Cutting Length | 3/4" |
| Cutting Type | Center |
| Dia. | 0.344" |
| Dimensions Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Square |
| End Style | Square |
| End Type | Double End |
| Finish | Bright |
| Finish-machining | Bright (Uncoated) |
| Grade | General Purpose |
| Helix Angle | 30° |
| List Number | HDC-4C |
| Material | Cobalt |
| Material Grade-machining | General Purpose |
| Material-machining | Cobalt |
| Milling Dia. | 11/32" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| No. Of Flutes | 4 |
| Overall Length | 3 1/2" |
| Primary Material Application | Cast Iron, Copper, Magnesium, Steel |
| Primary Material Application Iso Code | K, N, P |
| Shank Dia. | 3/8" |
| Shank Type | Weldon Flat |
| Shank Type-machining | Weldon Flat |
| Single End/double End | Double End |
| System Of Measurement | Fractional Inch |
| Type | Standard |
Shipping Info:
| Ship weight (kg) | 0.05 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 8.99 |
| Ship width (cm) | 2.54 |
| HS code | 8207703030 |
| Country of Origin | US |
Product Variants
| Model | Milling Dia. | Shank Dia. | Overall Length | List Number | Length Of Cut | End Type | Finish | End Mill Cutting Type | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| C42602 | 1/8" | 3/8" | 2 5/16" | HGC-2 | - | Single End | Bright | Center Cutting | €26.86 | |
| C42604 | 3/16" | 3/8" | 2 3/8" | HGC-2 | 7/16" | Single End | Bright | Center Cutting | €24.63 | |
| C42607 | 1/4" | 3/8" | 2 7/16" | HGC-2 | - | Single End | Bright | Center Cutting | €27.79 | |
| C42609 | 5/16" | 3/8" | 2 1/2" | HGC-2 | 9/16" | Single End | Bright | Center Cutting | €27.78 | |
| C42612 | 3/8" | 3/8" | 2 1/2" | HGC-2 | 9/16" | Single End | Bright | Center Cutting | €28.30 | |
| C32494 | 7/16" | 3/8" | 2.688" | - | - | Single End | Bright | - | €39.45 | |
| C42616 | 1/2" | 1/2" | 3 1/4" | HGC-2 | - | Single End | Bright | Center Cutting | €39.88 |
Explore Products
- GROVE GEAR EL8240515.19 EL-HM824-10-H_-56-19 Right Angle Gear Reducer, 10 to 1 Reduction Ratio, 175 RPM Output, 1172 lb-in Torque, Aluminum
- KUNKLE 919BDDV02BJE Safety Relief Valve, Male X Female NPT, D Orifice, 3/4 Inch Inlet Size
- SPEAKMAN S-2540-BN Shower Arm and Flange
- DDS 8010512TCV Rotary Shaft Oil Seal, 2 Lip With Spring, Tc, Fluoro, 80 mm ID, 105 mm Od, 12 mm Width
- APOLLO VALVES 70105J7 Ball Valve, 1 Inch Size, Bronze
- 3M 3PB40-4JG11 Half Mask Respirator Kit, 4 Cartridges Included, Silicone, M Mask Size
- RIDGID 30208
- QMARK MUH206 Electric Unit Heater Steel 1320 Cfm
Explore More
- KEYSHAFT
- Lock Washers
- Oil Protection Controls
- Step Drill Bits
- Spring Nuts
- Magnetic Ballasts
- ANSELL G12Y Alphatec Natural Rubber Gloves
- FACOM 34 Midget Open End Wrenches, 15° And 75° Hinged
- JOHN GUEST Bulkhead Unions, Polypropylene White
- RUD CHAIN VRM VIP Eye Nuts, Metric
- ANVIL AS3126 Series Hold Down Clamps
- OMRON Magnetically Actuated Safety Interlock Switch, 1NC
- WRIGHT TOOL Wrench Sets, 15 And 16 Deg.
- EATON Sine Wave Filters
- ACME ELECTRIC Three Phase Dry Type Distribution Transformers, 208V Delta Primary Volts, 480Y/277 Secondary Volts
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C52177 End Mill Cobalt 11/32 4 Flutes Double Square End Cc