BALDOR MOTOR VLECP4104T Vertical P-Base Motor, 230/460V, 1800 RPM, 60 Hz, 30 hp, TEFC, 286LP Frame
Get it by Tuesday, Dec 23
€12,356.35 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Vertical Pump Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps | 38A |
| Amps @ Voltage | 36A @ 460V, 72A @ 230V, 77A @ 208V |
| Amps @ Volts | 78A @ 208V, 76A @ 230V, 38A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Type | Not Applicable |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Conduit Box Material | Cast Iron |
| Conduit Box Position | F1 |
| Constant Torque Speed Range | 1 |
| Design Code | A |
| Drip Cover | Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 93.6% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 286LP |
| Frame Material | Iron |
| Frame Size | 286LP |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 36A |
| Hp | 30 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Duty |
| Kva Code | H |
| Lifting Lugs | Vertical Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max. Ambient Temp. | 40°C |
| Max. Motor Speed | 2700 RPM |
| Max. Rpm | 2700 RPM |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 10 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | Vertical Lifting Lugs |
| Motor Type | 1060M |
| Mounting Type | Vertical Lifting Lugs |
| Nameplate Rpm | 1760 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 30 hp @ 60 Hz |
| Overall Length | 32.44" |
| Phase | 3 |
| Power Factor | 80 |
| Product Datasheet | baldor-motor-vlecp4104t.pdf |
| Product Family | Super-E Chemical Processing |
| Pulley End Bearing Type | Thrust |
| Pulley Face Code | P Base |
| Pulley Shaft Indicator | P Base Groove, Key |
| Rpm | 1770 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 1 3/4" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Type | 1056M |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Division II |
| Xp Temp Code | T3C |
Shipping Info:
| Ship weight (kg) | 247.05 |
| Ship height (cm) | 93.98 |
| Ship length (cm) | 93.98 |
| Ship width (cm) | 90.17 |
| HS code | 85015230 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - VLCP4104T
- Constant Torque Speed Range: 1.3
- Drip Cover: Drip Cover
- Efficiency @ 100% Load: 93.60%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter duty
- KVA Code: J
- Lifting Lugs: Vertical Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 8 AWG
- Product Family: Super-E Chemical Processing
- Pulley End Bearing Type: Thrust
- Pulley Face Code: P-Base
- Pulley Shaft Indicator: P-Base Groove & Key
- Shaft Diameter: 1.750 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: Shaft Slinger
Documentation:
Product Variants
| Model | Voltage | Hp | Nameplate Rpm | Frame | Insulation Class | Type | Amps | Power Factor | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| VLECP2333T | 230/460V | 15 hp | 1765 RPM | 254LP | Class F | 0944M | 18.1A | 84 | €8,523.44 | |
| VLECP2334T | 230/460V | 20 hp | 1770 RPM | 256LP | Class F | 0960M | 24A | 83 | €8,833.94 | |
| VLECP2394T | 230/460V | 15 hp | 3510 RPM | 254LP | Class F | 0934M | 17A | 91 | €8,798.91 | |
| VLECP3660T | 230/460V | 3 hp | 3500 RPM | 182LP | Class F | 0628M | 3.4A | 92 | €4,758.70 | |
| VLECP3661T | 230/460V | 3 hp | 1755 RPM | 182LP | Class F | 0632M | 4.1A | 77 | €4,864.72 | |
| VLECP3663T | 230/460V | 5 hp | 3490 RPM | 184LP | Class F | 0632M | 5.7A | 90 | €5,238.64 | |
| VLECP3665T | 230/460V | 5 hp | 1750 RPM | 184LP | Class F | 0642M | 6.6A | 80 | €4,903.54 |
Explore Products
- HAKKO T15-I Soldering Tip Conical 0.2mm x 9.5mm
- BATTERY DOCTOR 81107 Primary Wire 18 Gauge Stranded 60V GPT/PVC Black
- E JAMES & CO 330-1/8XTAPE Rubber Cspe 1/8 Inch Thick 2 x 36 In
- CLE-LINE C62829 Jobber Length Drill Bit, 3.10 mm Size, 65 mm Overall Length
- ANVIL 0330267006 5 X 24 Std Blk A53 Tbe Nipple
- APOLLO VALVES 88A947147680 Class 300 Ball Valve, Side Vented Ball, Live Loaded, Lever Operated, TFM Seat, PEEK Bearing 1-1/2 Inch, 2 x Flange
- MONOPRICE 610712
- PHILIPS ADVANCE 929000654313 Integrade Lighting Profile
Explore More
- KEYSHAFT
- WHITE-RODGERS
- REPEL-AIDE
- FOL-DA-TANK
- IPG
- Training Videos
- Condensate Pumps
- Mechanical Machining Shears
- Chain Wrenches and Tongs
- Microbiology and Staining Supplies
- DESTACO 235 Series Horizontal Hold Down Clamps
- CONDOR Leather Gloves, Cowhide, Premium, Full Finger, Wing Thumb, Gray/Red
- CHICAGO PNEUMATIC CP26 Series Clutch Screwdrivers
- SUGATSUNE Edge Pull Handles
- HTCCONVEYORS 500 Load Capacity Roller Supports
- BRISKHEAT Fiberglass Heating Cords
- WELLER Solder Tip Chisel
- KETT TOOLS Needle Bearings
- KIMBLE CHASE KIMAX Pycnometers WIth Mercury Filled Thermometer
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR VLECP4104T Vertical P-Base Motor, 230/460V, 1800 RPM, 60 Hz, 30 hp, TEFC, 286LP Frame
€12,356.35 /unit