BALDOR MOTOR VLECP3663T Vertical P-Base Motor, 230/460V, 3600 RPM, 60 Hz, 5 hp, TEFC, 182LP Frame
Get it by Monday, Dec 22
€5,238.64 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Vertical Pump Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps | 5.7A |
| Amps @ Volts | 11.4A @ 230V, 5.7A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Type | Not Applicable |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 40.1 lbs.-ft. |
| Conduit Box Material | Cast Iron |
| Conduit Box Position | F1 |
| Constant Torque Speed Range | 6 |
| Design Code | A |
| Drip Cover | Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 90.2% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 184LP |
| Frame Material | Iron |
| Frame Size | 184LP |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 5.7A |
| Hp | 5 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Duty |
| Kva Code | M |
| Lifting Lugs | Vertical Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max. Ambient Temp. | 40°C |
| Max. Motor Speed | 5400 RPM |
| Max. Rpm | 5400 RPM |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 16 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | Vertical Lifting Lugs |
| Motor Type | 0632M |
| Mounting Type | Vertical Lifting Lugs |
| Nameplate Rpm | 3490 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 2 |
| No. Of Speeds | 1 |
| Output @ Frequency | 5 hp @ 60 Hz |
| Overall Length | 22.18" |
| Phase | 3 |
| Power Factor | 90 |
| Product Datasheet | baldor-motor-vlecp3663t.pdf |
| Product Family | Super-E Chemical Processing |
| Pulley End Bearing Type | Thrust |
| Pulley Face Code | P Base |
| Pulley Shaft Indicator | P Base Groove, Key |
| Rpm | 3490 RPM |
| Rpm Range | 3400-3600 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 1 1/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 3600 RPM |
| Synchronous Rpm @ Frequency | 3600 RPM @ 60 Hz |
| Synchronous Speed | 3600 RPM |
| Type | 0632M |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Division II |
| Xp Temp Code | T3C |
Shipping Info:
| Ship weight (kg) | 47.25 |
| Ship height (cm) | 41.28 |
| Ship length (cm) | 67.63 |
| Ship width (cm) | 42.23 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - VLCP3663T
- Constant Torque Speed Range: 6
- Drip Cover: Drip Cover
- Efficiency @ 100% Load: 90.20%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter duty
- KVA Code: M
- Lifting Lugs: Vertical Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 16 AWG
- No-Load Current: 0 A
- Product Family: Super-E Chemical Processing
- Pull-Up Torque: 30.6 LB-FT
- Pulley End Bearing Type: Thrust
- Pulley Face Code: P-Base
- Pulley Shaft Indicator: P-Base Groove & Key
- Shaft Diameter: 1.125 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Starting Current: 64.8 A
- Temp. Rise @ Rated Load: 51 deg C
- Temp. Rise @ S.F. Load: 62 deg C
Documentation:
Product Variants
| Product | Model | Voltage | Hp | Nameplate Rpm | Frame | Insulation Class | Type | Amps | Power Factor | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
VLECP2333T | 230/460V | 15 hp | 1765 RPM | 254LP | Class F | 0944M | 18.1A | 84 | €8,523.44 | |
|
VLECP2334T | 230/460V | 20 hp | 1770 RPM | 256LP | Class F | 0960M | 24A | 83 | €8,833.94 | |
|
VLECP2394T | 230/460V | 15 hp | 3510 RPM | 254LP | Class F | 0934M | 17A | 91 | €8,798.91 | |
|
VLECP3660T | 230/460V | 3 hp | 3500 RPM | 182LP | Class F | 0628M | 3.4A | 92 | €4,758.70 | |
|
VLECP3661T | 230/460V | 3 hp | 1755 RPM | 182LP | Class F | 0632M | 4.1A | 77 | €4,864.72 | |
|
VLECP3665T | 230/460V | 5 hp | 1750 RPM | 184LP | Class F | 0642M | 6.6A | 80 | €4,903.54 | |
 |
VLECP3769T | 230/460V | 7 1/2 hp | 3510 RPM | 213LP | Class F | 0732M | 8.6A | 88 | €6,224.09 |
Explore Products
- TENNSCO WB-1-3072SHB Workbench 30 Inch Depth 1800 lbs Flared Legs
- HELICOIL 1324-12 Reference Gage, Metric Coarse, 4H5H, M12 x 1.75 Thread Size
- MAIN FILTER INC. MF0178723 0060R010V Hydraulic Filter, Stainless Steel Fiber, 10 Micron Rating, Viton Seal, 4.05 Inch Height
- APPROVED VENDOR E6BNH21 Pipe 1 1/2 Inch 316 Stainless Steel 60 Inch Length Schedule 80
- GRAINGER ZUSA-PF-10680 90 Deg. Street Elbow, Brass, 2 Inch X 2 Inch Pipe, Female Npt X Male Npt
- SPEAKMAN G41-0034-BB
- BALDOR / DODGE 231654 12X54 CR DR XT30 12X54 Crown Drum XT30
Explore More
- KEYSHAFT
- REMCO
- SMC VALVES
- TROEMNER
- SPILL MAGIC
- Air Drills
- Rotary Broach Holder Accessories
- Bulk Storage Lockers
- Floor Grinder Accessories
- Carbon Steel Blanks Flats Bars Plates and Sheet Stock
- MEMPHIS GLOVE Luminator Drivers Insulated Work Gloves
- KEO Metric NC Spotting Drills, Long
- GLOBE SCIENTIFIC Label Rolls, Cryo, 33 x 13 mm
- ANVIL AS150EH Series Channels With Elongated Holes
- BEL-ART - SCIENCEWARE Non-Vented Wash Bottle, Standard Spout, Wide Mouth
- TB WOODS J-Section V-Belt Pulleys
- SMC VALVES Clamp Cylinder
- PIP Disposable Clothing Lab Coats
- HAMILTON V-Grooved Track Wheel Casters, Stainless Steel
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR VLECP3663T Vertical P-Base Motor, 230/460V, 3600 RPM, 60 Hz, 5 hp, TEFC, 182LP Frame
€5,238.64 /unit