BALDOR MOTOR VEDM3615T Dirty Duty Plus Motor, 230/460V, 1800 RPM, 60 Hz, 5 hp, TEFC, 184TC Frame
Get it by Tuesday, Dec 23
€2,012.54 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Severe Duty Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps @ Voltage | 13.4A @ 230V, 13.9A @ 208V, 6.7A @ 460V |
| Amps @ Volts | 13.9A @ 208V, 13.4A @ 230V, 6.7A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Type | Not Applicable |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 52.2 lbs.-ft. |
| Conduit Box Material | Steel |
| Conduit Box Position | F1 |
| Constant Torque Speed Range | 6 |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 89.5% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 184TC |
| Frame Material | Steel |
| Frame Size | 184TC |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 13.9A @ 208V, 13.4A @ 230V, 6.7A @ 460V |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 6.7A |
| Hp | 5 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Duty |
| Kva Code | J |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max. Rpm | 2700 RPM |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 16 AWG |
| Motor Lead Termination | Ring Terminals |
| Motor Type | 3642M |
| Mounting Type | Not Applicable |
| Nameplate Rpm | 1750 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 5 hp @ 60 Hz |
| Overall Length | 18.1" |
| Phase | 3 |
| Power Factor | 78 |
| Product Datasheet | baldor-motor-vedm3615t.pdf |
| Product Family | Dirty Duty Plus |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | C Face |
| Pulley Shaft Indicator | Standard |
| Rpm | 1750 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 1 1/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 40.95 |
| Ship height (cm) | 41.28 |
| Ship length (cm) | 67.63 |
| Ship width (cm) | 42.23 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - VWAM3615T
- Constant Torque Speed Range: 6
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 89.50%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter duty
- KVA Code: J
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 16 AWG
- No-Load Current: 0 A
- Product Family: DIRTY DUTY PLUS
- Pull-Up Torque: 31.5 LB-FT
- Pulley End Bearing Type: Ball
- Pulley Face Code: C-Face
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 1.125 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Starting Current: 49.1 A
- Temp. Rise @ Rated Load: 71 deg C
- Temp. Rise @ S.F. Load: 87 deg C
Documentation:
Product Variants
| Model | Nameplate Rpm | Hp | Motor Type | Service Factor | Mounting Type | Shaft Dia. | Overall Length | Rpm Range | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| CDM3538 | 1725 RPM | 1/2 hp | 3420M | 1.25 | C Face, Foot Mounted | 5/8" | 11.35" | 1700-1800 RPM | €1,021.64 | |
| CDM3539 | 1140 RPM | 1/2 hp | 3428M | 1.25 | - | 5/8" | 12.85" | 1100-1200 RPM | €1,325.15 | |
| CDM3543 | 1160 RPM | 3/4 hp | 3518M | 1.15 | C Face, Foot Mounted | 5/8" | 13.23" | 1100-1200 RPM | €1,344.01 | |
| CEDM3545 | 3450 RPM | 1 hp | 3516M | 1.25 | C Face, Foot Mounted | 5/8" | 12.23" | 3400-3600 RPM | €1,414.42 | |
| CEDM3546 | 1760 RPM | 1 hp | 3520M | 1.15 | - | 5/8" | 12.23" | 1700-1800 RPM | €1,565.19 | |
| CEDM3550 | 3500 RPM | 1 1/2 hp | 3520M | 1.15 | - | 5/8" | 12.23" | 3400-3600 RPM | €1,546.35 | |
| CEDM3554 | 1760 RPM | 1 1/2 hp | 3526M | 1.15 | C Face, Foot Mounted | 5/8" | 13.23" | 1700-1800 RPM | €1,693.16 |
Explore Products
- PASS AND SEYMOUR CDFB73P277-I Titan Fluorescent Dimmer, 277V, 2 Wire, Ivory
- MAIN FILTER INC. MF0261768 FC1073F010BS Interchange Hydraulic Filter, Glass, 10 Micron Rating, Buna Seal, 20.47 Inch Height
- IRONCLAD KKC2FN-05-XL Coated Glove, XL, 3/4, Foam Nitrile, Gray, 1 Pair
- MERSEN FERRAZ NRN40BP Canadian Fuse, 250V, 40A, Ferrule Mount
- ADAPT-ALL 9072-02-02 Elbow, 90 deg., Male 0.125 NPT x Female 0.125 BSPP, Carbon Steel
- APOLLO VALVES 701051447 Bronze 2 Pcs Ball Valve with Side-Vented Ball Uni-Directional, SS Latch Lock Oval Handle 1 Inch Size, 2 x FNPT
- FABORY M67150.050.0030 Thread Rolling Screw, M5x0.8 Thread Size, Steel, 3.4 mm Head Ht., 30 mm Lg.
Explore More
- KEYSHAFT
- UEI TEST INSTRUMENTS
- VEGA TOOLS
- EASTERN METAL SIGNS AND SAFETY
- OPTICAM
- Wire Rope Clips
- Dressing Sticks
- Specialty Switches
- Radial Blade Blower, Direct Drive
- Exterior Wood Stains and Sealers
- DESTACO 305, 307, 309 Series Hold Down Clamps
- JOHN GUEST Union Tees, Acetal Gray
- KDR-LINE REACTORS 460/480 Input Voltage UL Type 1 Enclosure Input Line Reactors
- KIPP K0269 Series, M5 Thread Size Adjustable Handles
- PASS AND SEYMOUR Turnlok Ground Continuity Monitoring Connectors
- MERSEN FERRAZ RF Series Class H Fast-Acting Fuses
- MORSE CUTTING TOOLS 5995 Series Square And Corner Radius End Mills
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR VEDM3615T Dirty Duty Plus Motor, 230/460V, 1800 RPM, 60 Hz, 5 hp, TEFC, 184TC Frame
€2,012.54 /unit