BALDOR MOTOR FDEM3554T Farm Duty Motor, 230/460V, 1800 RPM, 60 Hz, 1.5 hp, 3 Phase, TEFC, 145T Frame
Get it by Tuesday, Dec 23
€1,270.82 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Farm Duty Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps | 4.6A @ 208V, 4.4A @ 230V, 2.2A @ 460V |
| Amps @ Voltage | 2.2A @ 460V, 4.4A @ 230V, 4.6A @ 208V |
| Amps @ Volts | 4.6A @ 208V, 4.4A @ 230V, 2.2A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Base Type | Rigid Base |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 20.6 lbs.-ft. |
| Conduit Box Material | Steel |
| Conduit Box Position | F1 |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 86.5% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 145T |
| Frame Material | Steel |
| Frame Size | 145T |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 2.2A |
| Full Load Torque | 0 ft.-lbs. |
| Full Load Torque | 0 lbs.-ft. |
| Grease Temp. | -20°F to +300°F |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 2.2A |
| Hp | 1 1/2 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Ready |
| Kva Code | M |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 18 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | Rigid Base |
| Motor Type | 3526M |
| Mounting Type | Rigid Base |
| Nameplate Rpm | 1750 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 1 1/2 hp @ 60 Hz |
| Overall Length | 13.31" |
| Phase | 3 |
| Power Factor | 72 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rpm | 1750 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 7/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Thermal Protection | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 18.45 |
| Ship height (cm) | 33.33 |
| Ship length (cm) | 49.21 |
| Ship width (cm) | 34.93 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 86.50%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter ready
- KVA Code: M
- Lifting Lugs: No Lifting Lugs
- Locked Bearing Indicator: No Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 18 AWG
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 10.1 LB-FT
- Pulley End Bearing Type: Sealed Bearing
- Pulley Face Code: Standard
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 0.875 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: Shaft Slinger
- Starting Current: 19.3 A
- Temp. Rise @ Rated Load: 42 deg C
- Temp. Rise @ S.F. Load: 50 deg C
Product Variants
| Model | Hp | Rpm Range | Frame | Nameplate Rpm | Mounting Type | Frame Material | Overall Length | Motor Type | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| FDEM2333T | 15 hp | 1700-1800 RPM | 254T | 1800 RPM | Foot Mounted | Iron | 23.55" | 0944M | €3,978.18 | |
| FDEM2334T | 20 hp | 1700-1800 RPM | 256T | 1800 RPM | Foot Mounted | Iron | 23.55" | 0952M | €4,808.73 | |
| FDEM2394T | 15 hp | 3400-3600 RPM | 254T | 3520 RPM | Rigid Base | Iron | 23.55" | 0930M | €4,340.00 | |
| FDEM3546 | 1 hp | 1700-1800 RPM | 56 | - | Rigid Base | Steel | 12.23" | 3520M | €1,218.85 | |
| FDEM3546T | 1 hp | 1700-1800 RPM | 143T | - | Rigid Base | Steel | 12.29" | 3520M | €1,235.52 | |
| FDEM3554 | 1 1/2 hp | 1700-1800 RPM | 56 | 1750 RPM | Rigid Base | Steel | 13.23" | 3526M | €1,246.31 | |
| FDEM3558 | 2 hp | 1700-1800 RPM | 56 | 1800 RPM | Foot Mounted | Steel | 13.23" | 3528M | €1,277.68 |
Explore Products
- AMETEK LAMB 33496-3 Brush Mechanism
- SANDVIK COROMANT QD-NH-0400-0002-CM 1105 Parting Insert, Neutral, 0.007 Inch Corner Radius
- TSUBAKI 60B30F-1C Finished Bore Sprocket, 30 Teeth, 1-3/16 Inch Bore
- EATON CB2533B120480G Pringle Bolted Pressure Contact Switch, 2500A, 120V, 3-Pole, Fusible, 480V, Three-Wire
- GATES 20/3V1180 Banded V-Belt, 13 Strand, 118 Inch Length, 0.387 Inch Thickness
- GATES 731700045
- STA-KON B87 Non-Insulated Ring Terminal, 18-14 AWG Wire Size
- SCIENTIFIC CUTTING TOOLS MS33649-12RLA 401863 Reamer Pilot Port Tool, Carbide Tipped, 1 1/16-12 Thread, 4 Flutes, Altin
Explore More
- KEYSHAFT
- THERMOSAFE
- CRYDOM
- FORMSPRAG
- TUFFTRAK SAFETY
- Extension Ladders
- Current Probes
- Electric Appliance Controls
- 3.3 Inch Diameter Motors
- Bevelers
- REVCOR Propeller 18 Inch
- DWYER INSTRUMENTS 651 Series Temperature Transmitters
- CONDOR Coated Gloves, Smooth, Nitrile
- SPEEDGLAS Welding Helmet Magnification Plates
- NEOPERL Faucet Adapter
- PASS AND SEYMOUR Flexcord Series Strain Relief Cord Grips
- EATON EG Series Molded Case Switches, EG Frame
- MILWAUKEE Impact Socket Adapters
- VOLLRATH Food Display Case Door Channels
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR FDEM3554T Farm Duty Motor, 230/460V, 1800 RPM, 60 Hz, 1.5 hp, 3 Phase, TEFC, 145T Frame
€1,270.82 /unit