BALDOR MOTOR FDEM2394T Farm Duty Motor, 230/460V, 3600 RPM, 60 Hz, 15 hp, 3 Phase, TEFC, 254T Frame
Get it by Monday, Dec 22
€4,340.00 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Farm Duty Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps | 38A @ 208V, 35A @ 230V, 17.5A @ 460V |
| Amps @ Voltage | 17.5A @ 460V, 35A @ 230V, 38A @ 208V |
| Amps @ Volts | 38A @ 208V, 35A @ 230V, 17.5A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Base Type | Rigid Base |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 105 lbs.-ft. |
| Conduit Box Material | Cast Iron |
| Conduit Box Position | F1 |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 91% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 254T |
| Frame Material | Iron |
| Frame Size | 254T |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 17.5A |
| Full Load Torque | 0 ft.-lbs. |
| Full Load Torque | 0 lbs.-ft. |
| Grease Temp. | -20°F to +300°F |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 17.5A |
| Hp | 15 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Ready |
| Kva Code | G |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 12 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | Rigid Base |
| Motor Type | 0930M |
| Mounting Type | Rigid Base |
| Nameplate Rpm | 3520 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 2 |
| No. Of Speeds | 1 |
| Output @ Frequency | 15 hp @ 60 Hz |
| Overall Length | 23.55" |
| Phase | 3 |
| Power Factor | 87 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rpm | 3520 RPM |
| Rpm Range | 3400-3600 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 1 5/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 3600 RPM |
| Synchronous Rpm @ Frequency | 3600 RPM @ 60 Hz |
| Synchronous Speed | 3600 RPM |
| Thermal Protection | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 113.4 |
| Ship height (cm) | 49.53 |
| Ship length (cm) | 71.12 |
| Ship width (cm) | 54.61 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 91.00%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter ready
- KVA Code: G
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 12 AWG
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 26.2 LB-FT
- Pulley End Bearing Type: Sealed Bearing
- Pulley Face Code: Standard
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 1.625 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: Shaft Slinger
- Starting Current: 110 A
- Temp. Rise @ Rated Load: 63 deg C
- Temp. Rise @ S.F. Load: 78 deg C
Product Variants
| Model | Hp | Rpm Range | Frame | Nameplate Rpm | Mounting Type | Frame Material | Overall Length | Motor Type | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| FDEM2333T | 15 hp | 1700-1800 RPM | 254T | 1800 RPM | Foot Mounted | Iron | 23.55" | 0944M | €3,978.18 | |
| FDEM2334T | 20 hp | 1700-1800 RPM | 256T | 1800 RPM | Foot Mounted | Iron | 23.55" | 0952M | €4,808.73 | |
| FDEM3546 | 1 hp | 1700-1800 RPM | 56 | - | Rigid Base | Steel | 12.23" | 3520M | €1,218.85 | |
| FDEM3546T | 1 hp | 1700-1800 RPM | 143T | - | Rigid Base | Steel | 12.29" | 3520M | €1,235.52 | |
| FDEM3554 | 1 1/2 hp | 1700-1800 RPM | 56 | 1750 RPM | Rigid Base | Steel | 13.23" | 3526M | €1,246.31 | |
| FDEM3554T | 1 1/2 hp | 1700-1800 RPM | 145T | 1750 RPM | Rigid Base | Steel | 13.31" | 3526M | €1,270.82 | |
| FDEM3558 | 2 hp | 1700-1800 RPM | 56 | 1800 RPM | Foot Mounted | Steel | 13.23" | 3528M | €1,277.68 |
Explore Products
- PHILIPS 5R20/PER/940/P/E26/DIM 6/1FB T20 LED Lamp, R20, Medium Screw, 5W, 450 lm, LED, Medium Screw, 65 mA
- MASTERDRIVES 5/5V630 Maxstar Wedge, Narrow Banded, 5V Section
- BALDOR / DODGE 443007 3/16X3/16X1 11/16 Key
- EATON 28-5863-LPA Standard Orientation Translucent Lens, Green
- VULCAN HART 00-959326-00001 Front Grate, 12 Inch Length
- 3M FP-301-3/64-Black-4 -Bulk Heat Shrink Tubing, 0.05 Inch ID. Before Shrinking, 4 Ft Length
- GRAND ROCK M-537 Muffler, 8.25 x 11.5 x 32 Inch Size, 3.5-4 Inch Inner Dia., Aluminized
- GATES 7858-8306 Taper-Lock Bushing With 3-3/8 Inch Bore
Explore More
- GROVE GEAR
- KEYSHAFT
- LEONARD VALVE
- TRITON
- KABLE KONTROL
- GFCI Receptacles
- Filtration Accessories
- Confined Space Ventilation Ducting
- Wire Connector Kits
- Metal Detectable Markers and Pens
- CONDOR Heat Resistant Gloves, Kevlar/Nomex
- VIEGA PROPRESS XL-C Reducer, Copper, Press X FTG Connection
- RUD CHAIN VRS Starpoint Eye Bolts, Metric Thread With Maximum Length
- TYGON B-44-4X Tubings
- EXAIR Thermoplastic Engineered Air Nozzles
- COOPER B-LINE Floor Stand Kits
- BENCHMARK SCIENTIFIC Accuris Series Precision Balances
- DAYTON Precision Lifting Forklift Booms
- GRAINGER Sharp Face Hand Stamp
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR FDEM2394T Farm Duty Motor, 230/460V, 3600 RPM, 60 Hz, 15 hp, 3 Phase, TEFC, 254T Frame
€4,340.00 /unit