BALDOR MOTOR EM31101 Three Phase Motor, 230/460V, 1200 RPM, 60 Hz, 0.25 hp, ODP, 56 Frame
0.7A
1200 RPM
Get it by Friday, Dec 19
€735.53 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | General Purpose Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps @ Volts | 1.7A @ 208V, 1.4A @ 230V, 0.7A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Base Type | Rigid Base |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 5.98 lbs.-ft. |
| Conduit Box Position | F1 |
| Design Code | B |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 67.5% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | ODP |
| Feedback Device | NO FEEDBACK |
| Frame | 56 |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 1.7A @ 208V, 1.4A @ 230V, 0.7A @ 460V |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 0.7A |
| Hp | 1/4 hp |
| Insulation Class | Class F |
| Inverter Code | Not Inverter |
| Kva Code | N |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Enclosure Design | Open Dripproof |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 18 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3416M |
| Mounting Type | Foot Mounted |
| Nameplate Rpm | 1140 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 6 |
| No. Of Speeds | 1 |
| Output @ Frequency | 1/4 hp @ 60 Hz |
| Overall Length | 10 1/4" |
| Phase | 3 |
| Power Factor | 48 |
| Product Datasheet | baldor-motor-em31101.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rpm | 1140 RPM |
| Rpm Range | 1100-1200 RPM |
| Service Factor | 1.35 |
| Shaft Dia. | 5/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1200 RPM |
| Synchronous Rpm @ Frequency | 1200 RPM @ 60 Hz |
| Synchronous Speed | 1200 RPM |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 230V @ 60 Hz, 460V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 10.8 |
| Ship height (cm) | 28.26 |
| Ship length (cm) | 41.91 |
| Ship width (cm) | 29.21 |
| HS code | 85015100 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - M3101
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 67.50%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Not inverter
- KVA Code: N
- Lifting Lugs: No Lifting Lugs
- Locked Bearing Indicator: No Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 18 AWG
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 3.59 LB-FT
- Pulley End Bearing Type: Ball
- Pulley Face Code: Standard
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 0.625 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Starting Current: 3.58 A
- Temp. Rise @ Rated Load: 37 deg C
- Temp. Rise @ S.F. Load: 43 deg C
Documentation:
Product Variants
| Product | Model | Motor Enclosure Design | Voltage | Hp | Service Factor | Mounting Type | Nameplate Rpm | Motor Type | Insulation Class | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
EM2504T | Open Slotted Band | 230/460V | 5 hp | 1.15 | Foot Mounted | 880 RPM | 3948M | Class F | €4,487.97 | |
 |
EM2506T | Open Slotted Band | 230/460V | 7 1/2 hp | 1.15 | Foot Mounted | 1180 RPM | Three Phase | Class F | €2,711.14 | |
|
EM2508T | Open Slotted Band | 230/460V | 7 1/2 hp | 1.15 | Foot Mounted | 880 RPM | 3962M | Class F | €5,616.34 | |
|
EM2511T | Open Dripproof | 230/460V | 10 hp | 1.15 | Foot Mounted | 1180 RPM | Three Phase | Class F | €5,099.18 | |
|
EM2513T | Open Dripproof | 230/460V | 15 hp | 1.15 | Foot Mounted | 1770 RPM | Three Phase | Class F | €4,561.57 | |
|
EM2513T-5 | Open Slotted Band | 575V | 15 hp | 1.15 | Foot Mounted | 1765 RPM | Three Phase | Class F | €3,275.33 | |
 |
EM2513T-CI | Open Air Over | 230/460V | 15 hp | 1.15 | Foot Mounted | - | Three Phase | Class F | €3,512.00 |
Explore Products
- WALTER TOOLS P2031005-M2 6149170 Spiral Point Tap, M2X0.4 Thread Size, 6 mm Thread Length, 45 mm Length
- MACROMATIC CUH05A2BE AC Current Sensor, 2VA, Indicator Style LED, -40 to 85 Deg C
- MARTIN SPROCKET CHB2203MCB
- GRAINGER BULK-CS-GFR4-103 Fiberglass Epoxy Laminate Rectangular Bar, 2 Inch x 24 Inch Nominal Size
- ERICKSON BT40BHPVTT18160M Shrink Fit Tool Holder And Adapter, 33.00 mm Shank Dia
- GUARDAIR 75LJ060AA Air Gun, Chrome, 64-1/4 Inch Length, 120 Psi
- TITAN FASTENERS ZJB0312
Explore More
- KEYSHAFT
- KURIYAMA
- TE CONNECTIVITY
- VISIONTRON
- STA RITE
- Traffic Doors
- Portable Blowers
- Micrometers
- Clamping Kits
- Cable Protector Accessories
- MEMPHIS GLOVE Luminator Pigskin Leather Palm Work Gloves
- CHICAGO PROTECTIVE APPAREL CarbonX Active Pants Black
- KEO Woodruff Keyseat Cutters, Shank Type, Cobalt
- ANVIL AS6024 Series Hex Head Cap Screws, Electro-Galvanized
- APPROVED VENDOR Disc Spring Curved Stainless Steel
- VERMONT GAGE Go/NoGo Standard Thread Plug Gages, 1/4-28 Unf Lh
- MIP TOOLS Strapping Dispensers, Regular Duty
- CEMENTEX USA Coat And Overpant Fan Kits, 40 Cal.
- STAFFORD MFG Solution Series, PowerRing Shaft Hub Locks
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR EM31101 Three Phase Motor, 230/460V, 1200 RPM, 60 Hz, 0.25 hp, ODP, 56 Frame
€735.53 /unit