BALDOR MOTOR EGDM4110T Grain Dryer Motor, 230/460V, 1800 RPM, 60 Hz, 40 hp, 3 Phase, TEFC, 324TZ Frame
Get it by Thursday, Dec 18
€11,351.10 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Farm Duty Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps | 102A @ 208V, 96A @ 230V, 48A @ 460V |
| Amps @ Voltage | 102A @ 208V, 48A @ 460V, 96A @ 230V |
| Amps @ Volts | 102A @ 208V, 96A @ 230V, 48A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Base Type | Rigid Base |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 386 lbs.-ft. |
| Conduit Box Material | Cast Iron |
| Conduit Box Position | F1 |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 94.1% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 324TZ |
| Frame Material | Iron |
| Frame Size | 324TZ |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 48A |
| Full Load Torque | 0 ft.-lbs. |
| Full Load Torque | 0 lbs.-ft. |
| Grease Temp. | -20°F to +300°F |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 48A |
| Hp | 40 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Ready |
| Kva Code | H |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 8 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | Rigid Base |
| Motor Type | 1254M |
| Mounting Type | Rigid Base |
| Nameplate Rpm | 1775 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 40 hp @ 60 Hz |
| Overall Length | 31.28" |
| Phase | 3 |
| Power Factor | 82 |
| Product Datasheet | baldor-motor-egdm4110t.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rpm | 1775 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 2 1/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Thermal Protection | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 233.1 |
| Ship height (cm) | 54.93 |
| Ship length (cm) | 85.73 |
| Ship width (cm) | 65.25 |
| HS code | 85015230 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - GDM4110T
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 94.10%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter ready
- KVA Code: H
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 8 AWG
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 193 LB-FT
- Pulley End Bearing Type: Sealed Bearing
- Pulley Face Code: Standard
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 2.125 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: Shaft Slinger
- Starting Current: 338 A
- Temp. Rise @ Rated Load: 54 deg C
- Temp. Rise @ S.F. Load: 64 deg C
Documentation:
Product Variants
| Model | Voltage | Hp | Frame | Nameplate Rpm | Frame Material | Overall Length | Motor Type | Power Factor | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| EGDM2333T | 208-230/460V | 15 hp | 254TZ | - | Iron | 24.55" | 0944M | 84 | €5,478.45 | |
| EGDM2334T | 230/460V | 20 hp | 256TZ | 1770 RPM | Iron | 24.55" | 0952M | 83 | €5,800.08 | |
| EGDM3615T | 208-230/460V | 5 hp | 184TZ | 1750 RPM | Steel | 19.04" | 3642M | 78 | €2,271.98 | |
| EGDM3661T | 208-230/460V | 3 hp | 182TZ | - | Iron | 16.42" | 0632M | 77 | €2,221.97 | |
| EGDM3665T | 208-230/460V | 5 hp | 184TZ | 1750 RPM | Iron | 16.42" | 0642M | 79 | €2,531.84 | |
| EGDM3710T | 230/460V | 7 1/2 hp | 213TZ | 1770 RPM | Steel | 20.03" | 3738M | 80 | €2,796.59 | |
| EGDM3714T | 230/460V | 10 hp | 215TZ | 1770 RPM | Steel | 21.53" | 3752M | 85 | €4,060.54 |
Explore Products
- RULAND MANUFACTURING SPK-6-A 3/8 Inch Two-Piece Shaft Collar, Aluminum, Clamp Style With Keyway, 7/8 Inch OD, 0.343 Inch Wd.
- GATES 12/C100 Banded V-Belt, 12 Strand, 104.18 Inch Length, 0.597 Inch Thickness
- PEER CHAIN 5019 Offset Link
- APPROVED VENDOR U07001.075.0150 Socket Head Cap Screw, 3/4 In - 10 Thread Size, Cyl., 1 1/2 In Lg., 3/4 In Head Ht., Zn Plated, Alloy Steel
- MAIN FILTER INC. MF0424596 Interchange Hydraulic Filter, Glass, 10 Micron, Viton Seal, 8.42 Inch Height
- GATES 15/3V600 Banded V-Belt, 15 Strand, 59.972 Inch Length, 0.34 Inch Thickness
- RELAY AND CONTROL CORP PBS-1 Control Station, 1 Button, Momentary
- ENERPAC GT4PNRS2000U08 Adapter Kit, 2 8 UN Thread Size
Explore More
- BERNZOMATIC
- CHEMTROLS VALVES
- HUBBELL WIRING DEVICE-KELLEMS
- KEYSHAFT
- CHRISLYNN
- Magnetic Parts Trays and Holders
- Liquid Level Switches
- Signal Conditioner
- Door Bolts
- Drill Bit Inserts
- AKRO-MILS 30260 Akrobins Plastic Storage Bins
- ACME ELECTRIC WI015 Series Medium Voltage Transformers, 3 Phase, 60Hz, 2.5kV & 5kV Class
- KEO Woodruff Keyseat Cutter Sets
- ANVIL 026CTG Series Light Duty Two-Hole Pipe Straps, Copper Plated
- ASHCROFT Pressure Transducer
- EATON M22 Series Dust Covers
- WESTWARD General Purpose Metal Shelf And Utility Carts
- MITUTOYO 112 Series Point Micrometers
- RHEEM Electric Thermostats
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR EGDM4110T Grain Dryer Motor, 230/460V, 1800 RPM, 60 Hz, 40 hp, 3 Phase, TEFC, 324TZ Frame
€11,351.10 /unit