BALDOR MOTOR EGDM2334T Grain Dryer Motor, 230/460V, 1800 RPM, 60 Hz, 20 hp, 3 Phase, TEFC, 256TZ Frame
Get it by Friday, Dec 19
€5,800.08 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Farm Duty Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps | 52A @ 208V, 48A @ 230V, 24A @ 460V |
| Amps @ Voltage | 24A @ 460V, 48A @ 230V, 51A @ 208V |
| Amps @ Volts | 52A @ 208V, 48A @ 230V, 24A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Base Type | Rigid Base |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 232 lbs.-ft. |
| Conduit Box Material | Cast Iron |
| Conduit Box Position | F1 |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 93% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 256TZ |
| Frame Material | Iron |
| Frame Size | 256TZ |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 24A |
| Full Load Torque | 0 ft.-lbs. |
| Full Load Torque | 0 lbs.-ft. |
| Grease Temp. | -20°F to +300°F |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 24A |
| Hp | 20 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Ready |
| Kva Code | H |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 10 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | Rigid Base |
| Motor Type | 0952M |
| Mounting Type | Rigid Base |
| Nameplate Rpm | 1770 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 20 hp @ 60 Hz |
| Overall Length | 24.55" |
| Phase | 3 |
| Power Factor | 83 |
| Product Datasheet | baldor-motor-egdm2334t.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rpm | 1765 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 1 5/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Thermal Protection | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 145.35 |
| Ship height (cm) | 49.85 |
| Ship length (cm) | 78.74 |
| Ship width (cm) | 60.33 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - GDM2334T
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 93.00%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter ready
- KVA Code: J
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 10 AWG
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 126 LB-FT
- Pulley End Bearing Type: Sealed Bearing
- Pulley Face Code: Standard
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 1.625 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: Shaft Slinger
- Starting Current: 198 A
- Temp. Rise @ Rated Load: 58 deg C
- Temp. Rise @ S.F. Load: 70 deg C
Documentation:
Product Variants
| Model | Voltage | Hp | Frame | Nameplate Rpm | Frame Material | Overall Length | Motor Type | Power Factor | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| EGDM2333T | 208-230/460V | 15 hp | 254TZ | - | Iron | 24.55" | 0944M | 84 | €5,478.45 | |
| EGDM3615T | 208-230/460V | 5 hp | 184TZ | 1750 RPM | Steel | 19.04" | 3642M | 78 | €2,271.98 | |
| EGDM3661T | 208-230/460V | 3 hp | 182TZ | - | Iron | 16.42" | 0632M | 77 | €2,221.97 | |
| EGDM3665T | 208-230/460V | 5 hp | 184TZ | 1750 RPM | Iron | 16.42" | 0642M | 79 | €2,531.84 | |
| EGDM3710T | 230/460V | 7 1/2 hp | 213TZ | 1770 RPM | Steel | 20.03" | 3738M | 80 | €2,796.59 | |
| EGDM3714T | 230/460V | 10 hp | 215TZ | 1770 RPM | Steel | 21.53" | 3752M | 85 | €4,060.54 | |
| EGDM3770T | 208-230/460V | 7 1/2 hp | 213TZ | 1770 RPM | Iron | 19.45" | 0738M | 81 | €3,114.30 |
Explore Products
- DORIAN C6016N
- NEWCO 8010-0604
- HOFFMAN PDSK 89410 Door Stop Kit, Fits Door Bars, 0.5 lbs., Steel
- EATON NGS212533M Molded Case Circuit Breaker, Ng-Frame, Ng Type, Electronic Ls Trip, 2-Pole, 1250A, 480 Vac
- MERIT BRASS SW3690D-08 Sock-o-let, Nominal Size 1/2 Inch
- APPROVED VENDOR 1ZTJ2 Swivel Stem Caster With Brake 5 Inch 280 Lb
- BOSTON GEAR GF48B Change Gear, 10 Diametral Pitch, 14 1/2 Deg. Pressure Angle, 48 Teeth, Cast Iron
- DIXON B3114MP-G400150 Clamp Concentric Reducer, 304 Stainless Steel, 4 x 1-1/2 Inch Tube O.D.
Explore More
- EKLIND
- KEYSHAFT
- LUTRON
- HEIL QUAKER
- KERI SYSTEMS
- Collet Sets
- Waste Disposer Accessories
- Air Files
- Vertical Milling Machines
- Nut Inserts
- DESTACO 8100/8300 Series Pneumatic Swing Clamps
- KRYTOX GPL 204 Series Standard Grade Grease
- LOC-LINE 1/4 Inch Sockets To 1/8 Inch FNPT Connectors
- ANVIL 005G Series J Style Hangers, Electro-Galvanized Steel
- ANVIL AS500 Series Channels, Solid
- KLEIN TOOLS Cooling Band
- SPEARS VALVES CPVC New Style Tank Adapters With Neoprene Gaskets, Socket x SR Fipt SS Collar
- VESTIL LM Series High Rise Booms, Non-Telescoping
- EATON Type CV Molded Case Circuit Breakers
- SQUARE D Power Distribution Block
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR EGDM2334T Grain Dryer Motor, 230/460V, 1800 RPM, 60 Hz, 20 hp, 3 Phase, TEFC, 256TZ Frame
€5,800.08 /unit