BALDOR MOTOR EGDM4104T Grain Dryer Motor, 230/460V, 1800 RPM, 60 Hz, 30 hp, 3 Phase, TEFC, 286TZ Frame
Get it by Tuesday, Dec 23
€8,561.36 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Farm Duty Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps | 78A @ 208V, 76A @ 230V, 38A @ 460V |
| Amps @ Voltage | 38A @ 460V, 76A @ 230V, 78A @ 208V |
| Amps @ Volts | 78A @ 208V, 76A @ 230V, 38A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Base Type | Rigid Base |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 330 lbs.-ft. |
| Conduit Box Material | Cast Iron |
| Conduit Box Position | F1 |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 93.6% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 286TZ |
| Frame Material | Iron |
| Frame Size | 286TZ |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 38A |
| Full Load Torque | 0 lbs.-ft. |
| Full Load Torque | 0 ft.-lbs. |
| Grease Temp. | -20°F to +300°F |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 38A |
| Hp | 30 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Ready |
| Kva Code | J |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 8 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | Rigid Base |
| Motor Type | 1056M |
| Mounting Type | Rigid Base |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 30 hp @ 60 Hz |
| Overall Length | 28.76" |
| Phase | 3 |
| Power Factor | 80 |
| Product Datasheet | baldor-motor-egdm4104t.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rpm | 1760 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 1 7/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Thermal Protection | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 195.3 |
| Ship height (cm) | 59.69 |
| Ship length (cm) | 87.63 |
| Ship width (cm) | 67.31 |
| HS code | 85015230 |
| Country of Origin | US |
Product Details:
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 93.60%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter ready
- KVA Code: J
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 8 AWG
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 142 LB-FT
- Pulley End Bearing Type: Sealed Bearing
- Pulley Face Code: Standard
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 1.875 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: Shaft Slinger
- Starting Current: 270 A
- Temp. Rise @ Rated Load: 64 deg C
- Temp. Rise @ S.F. Load: 76 deg C
Documentation:
Product Variants
| Model | Voltage | Hp | Frame | Nameplate Rpm | Frame Material | Overall Length | Motor Type | Power Factor | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| EGDM2333T | 208-230/460V | 15 hp | 254TZ | - | Iron | 24.55" | 0944M | 84 | €5,478.45 | |
| EGDM2334T | 230/460V | 20 hp | 256TZ | 1770 RPM | Iron | 24.55" | 0952M | 83 | €5,800.08 | |
| EGDM3615T | 208-230/460V | 5 hp | 184TZ | 1750 RPM | Steel | 19.04" | 3642M | 78 | €2,271.98 | |
| EGDM3661T | 208-230/460V | 3 hp | 182TZ | - | Iron | 16.42" | 0632M | 77 | €2,221.97 | |
| EGDM3665T | 208-230/460V | 5 hp | 184TZ | 1750 RPM | Iron | 16.42" | 0642M | 79 | €2,531.84 | |
| EGDM3710T | 230/460V | 7 1/2 hp | 213TZ | 1770 RPM | Steel | 20.03" | 3738M | 80 | €2,796.59 | |
| EGDM3714T | 230/460V | 10 hp | 215TZ | 1770 RPM | Steel | 21.53" | 3752M | 85 | €4,060.54 |
Explore Products
- GRAINGER BULK-RS-N80-65 Neoprene Sheet, 12 Inch X 12 Inch, 0.375 Inch Thickness, 80A
- NIBCO NLQ095L LC-2000 Butterfly Valve, Lug, 8 Inch Size, 200 PSI, EPDM, Cast Iron
- GRAINGER 206-602704 Corner Radius End Mill, Ticn Finish, 4 Flutes, 5/16 Inch Milling Dia
- COOPER B-LINE B133PAGRN Tee Plate, Four Holes, 5.37 x 3.5 x 1.62 Inch Size, Steel
- METRO 5MPR-14 Rigid Stem Caster H5 Inch 14 Inch Channel PR
- DAYCO 5060450 Serpentine Belt Industry Number 6145
- BOSTON GEAR 12260 Miter Gear, Diametral Pitch 12, Teeth 36, Pressure Angle 20 Degree
- 3M 7010398847 Heat Shrink Tubing, 0.5 Inch Inside Dia., 0.25 Inch I.D. After Shrinking
Explore More
- INNOVATIVE COMPONENTS
- KEYSHAFT
- TRACTEL
- UNIWELD
- HARPSTER TARPS
- Riveters
- Cooling Equipment Relays
- Thickness Gages
- Magnetic Starters with Thermal Overload
- Filter Pad Holding Frames
- PS DOORS Safemezz Pallet Gates
- ANSELL 88-390 Alphatec Neoprene Natura Latex Chemical Resistant Gloves
- MCR SAFETY RT1 Series Foam Lined Safety Glasses
- JOHN GUEST Male Connectors, NPTF Thread, Polypropylene Black
- TEMPCO Flanged Immersion Heaters
- SCIENTIFIC CUTTING TOOLS Boring Bar 0.16 Inch Bore
- GORLITZ Cone Chucks
- BLACKBURN (T&B) KV18 Series Fork Terminals
- KNIPEX Chain Nose Pliers
- RACO Liquidtight 90 Degree Connectors
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR EGDM4104T Grain Dryer Motor, 230/460V, 1800 RPM, 60 Hz, 30 hp, 3 Phase, TEFC, 286TZ Frame
€8,561.36 /unit