BALDOR MOTOR CL1410TM Single Phase Open Motor, 230V, 1800 RPM, 60 Hz, 5 hp, 184TC Frame
Get it by Wednesday, Dec 24
10.00% off
€2,442.54 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | General Purpose Motor |
| Ac/dc | AC |
| Ambient Temp. | 40°C |
| Amps | 23A |
| Amps @ 208v | 25A |
| Base Indicator | Rigid |
| Base Type | Rigid Base |
| Bearing Type | Ball |
| Break-down Torque | 34 lbs.-ft. |
| Class | Stock |
| Code | G |
| Conduit Box Material | Steel |
| Conduit Box Position | F1 |
| Design Code | L |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency | 82.5% |
| Enclosure Design | Open |
| Frame | 184TC |
| Frame Material | Steel |
| Frame Size | 184TC |
| Frequency | 60 Hz |
| Full Load Amps | 23/25A |
| Full Load Torque | 15 lbs.-ft. |
| Full Load Torque | 15 ft.-lbs. |
| Hp | 5 hp |
| Hz | 60 Hz |
| Ins. Class | Class F |
| Insulation Class | Class F |
| Inverter Code | Not Inverter |
| Inverter Rated | No |
| Lead | 2#10 A Ph, 3#16 B&J |
| Lead | 2#10 A PH,3#16 B&J |
| Length Less Shaft | 13 7/8" |
| Line-line Res. @ 25° C | 0.45 ohms A Ph/1.56 ohms B Ph |
| Locked-rotor Torque | 41 lbs.-ft. |
| Max. Ambient Temp. | 40°C |
| Motor Application | General Application |
| Motor Bearings | Ball |
| Motor Design | Capacitor Start/Run |
| Motor Enclosure Design | Open Dripproof |
| Motor Frame Material | Steel |
| Motor Mounting Position | Horizontal |
| Motor Mounting Type | Rigid Base |
| Motor Service Factor | 1.15 |
| Motor Shaft Design | Standard |
| Motor Shaft Rotation | Counter Clockwise |
| Motor Thermal Protection | Manual |
| Multiplier | L1 |
| Nameplate Rpm | 1725 RPM |
| Nema Design | L |
| Nema/iec | NEMA |
| No Load Amps | 8.4A |
| No. Of Motor Leads | 2 |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Nominal Efficiency | 82.5% |
| Overall Length | 16 1/2" |
| Part Winding Start Capable | Yes |
| Phase | 1 |
| Power Factor | 87 |
| Product Datasheet | baldor-motor-cl1410tm.pdf |
| Proprietary | No |
| Pull-up Torque | 28 lbs.-ft. |
| Pulley Face Code | C Face |
| Removable Base | Regreasable Bearings |
| Revision | AB |
| Rpm | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 1 1/8" |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Length | 2 5/8" |
| Shaft Rotation | Reversible |
| Start Configuration | DOL |
| Starting Amps | 140A |
| Synchronous Rpm | 1800 RPM |
| Temp. Rise @ Rated Load | 90°C |
| Temp. Rise @ S. F. Load | 110°C |
| Thermal Protection | Manual |
| Type | 3640LC |
| Usable @ 208v | Yes |
| Voltage | 230V |
| Wire Size | 10 AWG |
Shipping Info:
| Ship weight (kg) | 39.6 |
| Ship height (cm) | 38.42 |
| Ship length (cm) | 54.93 |
| Ship width (cm) | 40.96 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- Explosion Proof Class/Group: NONE
- Locked-Rotor Torque: 41 LB-FT
- Nameplate No.: NP1257L
- Pull-Up Torque: 28 LB-FT
- Starting Current: 140 Amps
Documentation:
Product Variants
| Model | Motor Enclosure Design | Voltage | Nameplate Rpm | Hp | Service Factor | Motor Type | Frame | Insulation Class | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| CEL11301 | Open Dripproof | 115-230V | 1740 RPM | 1/3 hp | 1.35 | 3418LC | 56C | Class B | €749.17 | |
| CEL11303 | Open Dripproof | 115-230V | 3450 RPM | 1/2 hp | 1.25 | 3413LC | 56C | Class B | €780.91 | |
| CEL11307 | Open Dripproof | 115-230V | 1750 RPM | 3/4 hp | 1.25 | 3524LC | 56C | Class F | €1,128.11 | |
| CL1408TM | Open Air Over | 115/230V | 1725 RPM | 3 hp | 1.15 | - | 184TC | Class F | €1,696.37 |
Explore Products
- BISHOP-WISECARVER WDW2SSX Washdown Guide Wheel Size 2 Bore.375 In
- EATON ECN1812CAA-R63/C Motor Control Starter, 460/440 VAC, V Coil, 3 Pole
- RIDGID 36398 Washer
- MORSE CUTTING TOOLS 32319 Straight Flute Tap, 3/4 Inch Nc, 10 TPI, 4 Flute, H3 Taper Straight
- ROADPRO RPSL-350 Quart Slow Cooker Auto Travel 12v
- PETERSEN PRODUCTS 938-96106-265 Deflection Gauge, 1 Inch Pipe Size, 6 Inch Size, 5 Percent Deflection, Steel
- SMC VALVES NCDQ2B32-30DZ-A90 Compact Cylinder, 32 mm Size, Double Acting Auto Switcher
- BOSCH OSL212CG Oscillating Tool Blade, 2 1/2 Inch Blade Width, 4 Inch Overall Length, Carbide Grit
Explore More
- JANCY
- KEYSHAFT
- NEWCO
- MRSTEAM
- OFFICINE RIGAMONTI
- Bathroom Sinks
- Keyway Broach Bushings
- Dunnage Racks
- Receptacle and Switch Wiring Modules
- Chain Saw Accessories
- AKRO-MILS 30255 Akrobins Plastic Storage Bins
- MEMPHIS GLOVE Ninja BNF Work Gloves, 18 Gauge, Palm and Fingertips Coated
- DESTACO 344-R Series Pull Action Latch Clamps
- VIBCO 6P Series Heavy Duty Electric Vibrators
- KIPP K0647 Adjustable Cam Lever With External Thread
- FERVI Parallel Couple Set
- CH HANSON Single Piece Letter Hand Stamps, Round Face
- VULCAN HART Fuses, 3A
- ANVIL AS929 Series U Supports
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR CL1410TM Single Phase Open Motor, 230V, 1800 RPM, 60 Hz, 5 hp, 184TC Frame
€2,713.93 /unit