APPROVED VENDOR U24211.008.0025 Machine Screw, 2-56 Thread Size, Steel, 1/4 In Lg., Std, Phillips
Get it by Tuesday, Mar 3
€ 24,99 Flat Shipping + VAT € 24,99 flat shipping is applicable on orders with an aggregate weight less than 10kg. Orders exceeding 10kg will be charged default shipping rates.
5.00% off
€10.23 /pkg. of 100
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Machine Screw |
| Class | Class 3A, Class 2A |
| Dimensional Standards | ASME B18.6.3 |
| Drive | Phillips |
| Drive Size | #1 |
| Drive Type | Phillips |
| Fastener Length | 1/4" |
| Finish | Zinc Plated |
| Head Dia. | 0.162" |
| Head Height | 0.162" |
| Head Type | Round Spacer |
| Length | 1/4" |
| Machine Screw Type | Standard Machine Screw |
| Material | Steel |
| Minimum Head Height | 0.059" |
| Minimum Head Width | 0.144" |
| Screw Size | #2 |
| System Of Measurement | Imperial |
| Tensile Strength | 60000 psi |
| Thread Direction | Right Hand |
| Thread Fit | Class 2A, Class 3A |
| Thread Length | 1/4" |
| Thread Size | #2-56 |
| Thread Style | Fully Threaded |
| Thread Type | Coarse |
| Type | Standard Machine Screw |
Shipping Info:
| Ship weight (kg) | 0.02 |
| Ship height (cm) | 4.06 |
| Ship length (cm) | 6.1 |
| Ship width (cm) | 5.59 |
| HS code | 7318156080 |
| Country of Origin | TW |
Product Variants
| Product | Model | Thread Size | Head Height | Thread Type | Head Dia. | Thread Length | Drive Size | Head Width | Tensile Strength | Pkg. Qty. | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
U24211.008.0037 | #2-56 | 0.069" | Coarse | 0.162" | 3/8" | #1 | - | 60000 psi | 100 | €4.46 | |
 |
U24211.008.0050 | #2-56 | 0.162" | Coarse | 0.162" | 1/2" | #1 | - | 60000 psi | 100 | €9.24 | |
 |
U24211.008.0075 | #2-56 | 0.069" | Coarse | 0.162" | 3/4" | #1 | - | 60000 psi | 100 | €5.50 | |
 |
U24211.011.0018 | #4-40 | 0.086" | Coarse | 0.212" | 3/16" | #1 | - | 60000 psi | 100 | €4.22 | |
 |
U24211.011.0025 | #4-40 | 0.211" | Coarse | 0.212" | 1/4" | #1 | - | 60000 psi | 100 | €5.14 | |
 |
U24211.011.0031 | #4-40 | 0.086" | Coarse | 0.212" | 5/16" | #1 | - | 60000 psi | 100 | €5.05 | |
 |
U24211.011.0037 | #4-40 | 0.211" | Coarse | 0.212" | 3/8" | #1 | - | 60000 psi | 100 | €6.17 |
Explore Products
- BRADY 2HX-1000-2-WT-2 117419 Precut Label Roll, 1 x 1 Inch, Polyolefin, White, For 1 AWG to 8 AWG Wire Gauge
- ULTRATECH 2181 Drain Seal, Square, Economy, 610 x 610mm Size, Orange
- APPROVED VENDOR 2HZW7 Rod Wiper An 13/16 Id 0.810 Rod
- FABORY U39000.409.0600 Taper Pin, Std, 7 Small End Dia., 6 In Lg., 0.408 In Large End Dia., 7 Pin Size, Not Gr.
- OILITE AAM0612-12B Sleeve Bearing, Bronze, 6 mm Bore, 12 mm Od, 12 mm Length
- ANVIL 0861332906 2 X 1/4 Imp Forged Steel Hex Bushing
- PROCON 51A1BCT2GXX Pump/Motor Assembly, Stainless Steel, 17 GPH, EPDM with DC Brushless Motor, 24V
Popular Search Queries
- Approved-vendor Ms15795-806
- Approved-vendor Ms16555-641
- Approved-vendor Ms16555-617
- Approved-vendor Ms16555-622
- Approved-vendor Ms16555-602
- Approved-vendor Ms16555-629
- Approved-vendor Ms16555-640
- Approved-vendor Ms16555-625
- Approved-vendor Ms15795-803
- Approved-vendor Nas1352n08-10
- Approved-vendor Ms15795-805
Explore More
- ACME ELECTRIC
- KEYSHAFT
- MOSMATIC
- TESTO
- PANIMATIC
- LED Recessed Troffers
- Digital Multimeters
- Weld Nuts
- Stationary Air Tanks
- Tube Clamps
- WESTWARD Knee Pads
- ROLL PRODUCTS Hazardous Chemical Labels
- ANSELL 97-008 Activarmr Nitrile Coating Cut Resistant Gloves
- ACME ELECTRIC Three Phase Dry Type Distribution Transformers, 208V Delta Primary Volts, 208Y/120 Secondary Volts
- BALDOR / DODGE SLX Ball Bearings
- BANNER STAKES Wall Mounted Retractable Barriers
- DAYTON Uncoated Cables
- LAMP ESR1 Series Full Extension Drawer Slides
- MERIT BRASS XNL102 45 Deg Pipe Elbows
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
APPROVED VENDOR U24211.008.0025 Machine Screw, 2-56 Thread Size, Steel, 1/4 In Lg., Std, Phillips
€10.76 /pack