AEROQUIP 190235 Series Male Inverted Flare Short Elbows
Eaton 190235 Series short elbows are used in pipe fittings and provide flexibility to change the pipe direction. These units are compatible with hose series 1503, 2580, 2651, FC234, FC300, FC321, FC355 and FC802 and are tightened with a wrench.
Filter
A
B
C| Style | Model | Height | Compatible Hose Inside Dia. | Thread Size 1 | Hex Size 1 | End Size 1 | Hex Size 2 | Angle | End Gender 1 | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 190371-4S | 1.49" | 1/4" | 7/16"-24 | 11/25" | 7/16" | 0.62" | 45 Degree | Male | €64.87 | |
| B | 190297-8S | 1.94" | 1/2" | 3/4"-16 | 7/8" | 3/4" | 15/16" | 45 Degree | Female | €81.08 | |
| C | 190235-6-8S | 2 1/5" | 1/2" | 5/8"-18 | 0.62" | 5/8" | 0.94" | 90° | Male | €124.48 | |
| B | 190297-10S | 2 6/25" | 1 1/2" | 7/8"-14 | 1 1/8" | 7/8" | 1" | 45 Degree | Female | €113.59 | |
| C | 190235-4S | 2" | 1/4" | 7/16"-24 | 11/25" | 7/16" | 0.62" | 90° | Male | €58.60 | |
| C | 190235-5S | 2.03" | 0.31" | 1/2"-20 | 1/2" | 1/2" | 0.69" | 90° | Male | €62.76 | |
| C | 190235-6S | 2.13" | 0.38" | 5/8"-18 | 0.62" | 5/8" | 0.81" | 90° | Male | €49.36 | |
| C | 190235-7-6S | 2.13" | 0.38" | 11/16"-18 | 0.69" | 11/16" | 0.81" | 90° | Male | €117.02 | |
| C | 190235-8S | 2.29" | 1/2" | 3/4"-18 | 3/4" | 3/4" | 0.94" | 90° | Male | €92.31 |
Features
- These reusable hydraulic fittings feature an inverted flare that resists a mechanical pullout and can be assembled and disassembled repeatedly.
- They feature DURA-KOTE plating technology, allowing three times the corrosion protection on carbon steel fittings as compared to standard hose fittings.
- These 90-degree elbows can change the direction of the flow and reduces the effect of stream turbulence and potential internal erosion.
Standards and Approvals
- FC 300
- SAE 100R5
Frequently Asked Questions
What are these products made of?
These field-installed elbows are made of carbon steel that offers impact & wear-resistance, conductivity and durability.
What are the maintenance steps of Eaton's Aeroquip hoses?
- Store the hoses in a dry place.
- Inspect them visually, must eliminate the hose that has a cut or gouges in the cover.
- Inspect the hoses for kinking or broken reinforcement.
- Inadequate attention to the maintenance of the hose can result in hose leakage, bursting or other failures which can cause serious bodily injury or property damage from spraying fluids, flying projectiles or other substances.
We are here to help!
Looking for a part not listed here?
Explore More
- HEDLAND
- KEYSHAFT
- CS JOHNSON
- CLAMPCO
- SILVER KING
- Trash and Recycling Container Dollies
- Rotary Joints and Unions
- Countersunk Washers
- Bus Drop and Tray Cable
- Wired Intercom Accessories
- VALTERRA PVC Gate Valve, FIPT x MIPT
- ADB HOIST RINGS MFG. Stubby Ball End Hex Keys
- SALISBURY Class 00 Electrical Insulating Rubber Gloves, 11 Inch, Yellow
- BALLYMORE Unassembled Steel Rolling Ladders Without Handrails
- BURNDY E-C-G Type Transformer Tap Adapters, Copper
- JAY R. SMITH MFG. CO Hydrant Key Hydrants
- AKRO-MILS 35180 Nest And Stack Totes
- WATTS LF909 Small Series Reduced Pressure Zone Assemblies
- ACORN PE Tubings
- ALLEGRO SAFETY Replacement Filters