Onboard Raptor as a vendor

Upright Sump Pumps

Filter

DAYTON -

Non Submersible Sump Pumps

Dayton non-submersible sump pumps are used for applications where sump pump pits are narrow or shallow. These sump pumps feature dual ball bearings to accommodate axial and radial loads in both clockwise & anti-clockwise directions. They are equipped with housing made of ABS / cast iron / cast bronze for electrical insulation, increased stiffness and impact resistance. These non-submersible sump pumps can withstand liquid temperatures up to 140 degrees F, and are available in 1/3 & 1/2 hp variants.

DAYTON 4KU64A
DAYTON 4KU63B
DAYTON 4KU60C
StyleModelImpeller MaterialPump Body MaterialHousing MaterialHpVoltageFlow Rate @ 10 Ft.AmpsVolute MaterialPrice
A4KU64ABS--1/3 hp115V AC37 GPM4APlastic€192.15
B4KU63Stainless SteelCast BronzeCast Bronze1/2 hp120V AC48 GPM5ABrass€601.76
B4KU62Stainless SteelCast BronzeCast Bronze1/3 hp115V AC37 GPM4ABrass€547.05
C4KU60Stainless SteelCast IronCast Iron1/3 hp115V AC37 GPM4ACast Iron€335.53
C4KU61Stainless SteelCast IronCast Iron1/2 hp120V AC48 GPM5ACast Iron€352.94
DAYTON -

Upright Sump Pumps

Dayton upright sump pumps are used to pump out the collected water in basement of the commercial or residential spaces with no water sewage. They are made from stainless steel for durability & corrosion resistance and are ideal for use in confined spaces with less surface area. These sump pumps feature automatic thermal protection to stop the pump if the operating temperature exceeds the safe limit and a continuous duty AC motor for producing a maximum power output of 1/2 HP. Choose from a wide range of sump pumps, available in 7 and 9A current ratings on Raptor Supplies.

DAYTON 5URH9A
DAYTON 5URJ0B
DAYTON 5URH8C
DAYTON 5URJ5D
DAYTON 5URJ6E
DAYTON 5URJ4F
DAYTON 5URJ3G
DAYTON 5URJ7H
StyleModelPump Body MaterialHousing MaterialImpeller MaterialHpFlow Rate @ 10 Ft.AmpsVolute MaterialHeightPrice
A5URH9Cast BronzeCast BronzeStainless Steel1/3 hp44 GPM4ABrass37"€1,218.91
B5URJ0Cast BronzeCast BronzeStainless Steel1/3 hp44 GPM4ABrass49"€1,353.15
C5URH8Cast IronCast IronStainless Steel1/3 hp44 GPM4ACast Iron49"€1,189.74
D5URJ5Cast IronCast IronCast Iron1/2 hp72 GPM6ACast Iron43"€1,095.38
E5URJ6Cast IronCast IronCast Iron1/2 hp72 GPM6ACast Iron55"€1,366.19
C5URH7Cast IronCast IronStainless Steel1/3 hp44 GPM4ACast Iron37"€1,014.43
F5URJ4Stainless SteelStainless SteelStainless Steel1/2 hp58 GPM5AStainless Steel55"€1,188.29
G5URJ3Stainless SteelStainless SteelStainless Steel1/2 hp58 GPM5AStainless Steel43"€1,269.37
F5URJ2Stainless SteelStainless SteelStainless Steel1/3 hp44 GPM4AStainless Steel55"€1,253.25
G5URJ1Stainless SteelStainless SteelStainless Steel1/3 hp44 GPM4AStainless Steel43"€1,256.90
H5URJ7Stainless SteelStainless SteelStainless Steel1/2 hp72 GPM6AStainless Steel43"€2,178.07
JABSCO -

Self-Priming Pump, Phenolic Plastic, with a Viton Impeller

Self-Priming Pump, Phenolic Plastic, with a Viton Impeller
ModelItemPrice (ex. VAT)
12290-0004DZ9PTH€1,279.08
JABSCO -

Flangemount 3 Inch Marine Ventilation Blower, Reinforced Plastic, Coupled to a 12 VDC Motor

Flangemount 3 Inch Marine Ventilation Blower, Reinforced Plastic, Coupled to a 12 VDC Motor
ModelItemPrice (ex. VAT)
34739-0010DZ9RBP€234.96
JABSCO -

Self-Priming Pump, Phenolic Plastic, with a Viton Impeller

Self-Priming Pump, Phenolic Plastic, with a Viton Impeller
ModelItemPrice (ex. VAT)
12290-0274DZ9PTK€1,483.68
JABSCO -

Pump Head Kit, 316 Stainless Steel, with an EPDM Impeller

Pump Head Kit, 316 Stainless Steel, with an EPDM Impeller
ModelItemPrice (ex. VAT)
28440-2112DZ9QNC€3,657.72
RFQ
JABSCO -

Pump Head Kit, 316 Stainless Steel, with a Nitrile Impeller

Pump Head Kit, 316 Stainless Steel, with a Nitrile Impeller
ModelItemPrice (ex. VAT)
28440-2113DZ9QND€3,327.72
RFQ
JABSCO -

Pump Head Kit, 316 Stainless Steel, with a Viton Impeller

Pump Head Kit, 316 Stainless Steel, with a Viton Impeller
ModelItemPrice (ex. VAT)
28440-2114DZ9QNE€3,706.56
RFQ
JABSCO -

Pump Head Kit, 316 Stainless Steel, with a Nitrile Impeller

Pump Head Kit, 316 Stainless Steel, with a Nitrile Impeller
ModelItemPrice (ex. VAT)
28440-2213DZ9QNF€4,433.88
RFQ
JABSCO -

Bronze Self Priming Pump, Bronze, with a Neoprene Impeller and Buna/N Lip Type Seal

Bronze Self Priming Pump, Bronze, with a Neoprene Impeller and Buna/N Lip Type Seal
ModelItemPrice (ex. VAT)
12520-1271DZ9PUJ€1,211.76
RFQ
JABSCO -

Bronze Self Priming Pump, Bronze, with a Viton Impeller and Viton Lip Type Seal

Bronze Self Priming Pump, Bronze, with a Viton Impeller and Viton Lip Type Seal
ModelItemPrice (ex. VAT)
12520-0274DZ9PUH€1,202.52
RFQ
JABSCO -

Marine Engine Cooling Pump, Bronze, with a Neoprene Impeller

Marine Engine Cooling Pump, Bronze, with a Neoprene Impeller
ModelItemPrice (ex. VAT)
2570-3100DZ9QLU€2,360.16
RFQ
JABSCO -

Bronze Self Priming Pump, Bronze, with a Nitrile Impeller and Lip Type Seal

Bronze Self Priming Pump, Bronze, with a Nitrile Impeller and Lip Type Seal
ModelItemPrice (ex. VAT)
12510-0003DZ9PUC€1,104.84
RFQ
JABSCO -

Bronze Self Priming Pump, Bronze, with a Viton Impeller and Viton Lip Type Seal

Bronze Self Priming Pump, Bronze, with a Viton Impeller and Viton Lip Type Seal
ModelItemPrice (ex. VAT)
12520-1274DZ9PUL€2,146.32
RFQ
JABSCO -

Pump, 316 Stainless Steel, with a Nitrile Impeller,Close Coupled to a 5 Horsepower

Pump, 316 Stainless Steel, with a Nitrile Impeller,Close Coupled to a 5 Horsepower
ModelItemPrice (ex. VAT)
30530-4103DZ9QUG€8,704.08
RFQ
JABSCO -

Pump End, 316 with a Neoprene Impeller and Tungsten Carbide Mechanical Seal

Pump End, 316 with a Neoprene Impeller and Tungsten Carbide Mechanical Seal
ModelItemPrice (ex. VAT)
30530-2101DZ9QUN€7,913.40
RFQ
JABSCO -

Pump End, 316 with an EPDM Impeller and Tungsten Carbide Mechanical Seal

Pump End, 316 with an EPDM Impeller and Tungsten Carbide Mechanical Seal
ModelItemPrice (ex. VAT)
30530-2102DZ9QUP€8,030.88
RFQ
JABSCO -

Pump End, 316 with a Viton Impeller and Tungsten Carbide Mechanical Seal

Pump End, 316 with a Viton Impeller and Tungsten Carbide Mechanical Seal
ModelItemPrice (ex. VAT)
30530-2104DZ9QUR€10,240.56
RFQ
JABSCO -

Pump Head Kit, 316 Stainless Steel, with a Neoprene Impeller

Pump Head Kit, 316 Stainless Steel, with a Neoprene Impeller
ModelItemPrice (ex. VAT)
28440-2115DZ9QNB€3,343.56
RFQ
JABSCO -

Bulkhead Mounted Pump, Milk Tanker, 316 Stainless Steel

Bulkhead Mounted Pump, Milk Tanker, 316 Stainless Steel
ModelItemPrice (ex. VAT)
23930-7115DZ9QLQ€10,853.04
RFQ
JABSCO -

Bronze Self Priming Pump, Bronze, with a Neoprene Impeller and Buna/N Lip Type Seal

Bronze Self Priming Pump, Bronze, with a Neoprene Impeller and Buna/N Lip Type Seal
ModelItemPrice (ex. VAT)
12520-0271DZ9PUF€838.20
RFQ
12...78

Upright Sump Pumps

Upright sump pumps or pedestal pumps are used to pump water out of basements or crawl spaces to prevent flooding. Dayton pedestal pumps feature a cast-iron body for efficient heat dissipation rates while draining water from basement sump pits and a motor, mounted above the sump, for easy servicing. These pumps have a long rod, with a float on the end, to turn the switch on and off. Choose from a wide range of these upright sump pumps available in 4, 5.2, 7 and 9 ampere ratings on Raptor Supplies.

Popular Search Queries

Explore More