DAYTON Non Submersible Sump Pumps


Filter
Bearing Type: Dual Ball , Cord Length: 10ft. , Cord Size: 18/3 , Cord Type: SJT , Diameter: 12" , Duty: Intermittent , GPM of Water @ 20 Ft. of Head: 20 , Height: 30.5" , Hz: 60 , Insulation Class: B , Max. Dia. Solids: 0.375" , Motor Enclosure: ODP , Motor RPM: 1750 , Motor Type: PSC , NPT Outlet: 1-1/4" , Outlet: 1.25 , Phase: Single , RPM: 1750 , Switch Type: Vertical , Thermal Protection: Automatic , Type: Residential Pedestal
StyleModelVoltageHousing MaterialAmps ACFloat MaterialGPM of Water @ 10 Ft. of HeadGPM of Water @ 15 Ft. of HeadGPM of Water @ 5 Ft. of HeadHousingPrice (ex. VAT)
A
4KU64
115ABS4Polyethylene472655ABS€175.57
B
4KU60
115Cast iron4Copper472655Cast Iron€270.40
B
4KU61
115Cast iron5.2Copper583365Cast Iron€360.06
C
4KU63
115Cast Bronze5.2Copper583365Cast Bronze€483.58
C
4KU62
CCast Bronze4Copper472655Cast Bronze€444.54

Non Submersible Sump Pumps

Dayton non-submersible sump pumps are used for applications where sump pump pits are narrow or shallow. These sump pumps feature dual ball bearings to accommodate axial and radial loads in both clockwise & anti-clockwise directions. They are equipped with housing made of ABS / cast iron / cast bronze for electrical insulation, increased stiffness and impact resistance. These non-submersible sump pumps can withstand liquid temperatures up to 140 degrees F, and are available in 1/3 & 1/2 hp variants.

We are here to help!

Looking for a part not listed here?