WEG 01518OT3P254T-SGH 15378602 General Purpose Motor, ODP RolLED Steel 254/6T Frame, 15 HP, 1775 RPM, 200 V With Bearing Cap
Get it by Wednesday, Aug 26
€2,234.59 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | AC Motor |
| Altitude | 1000 m.a.s.l. |
| Ambient Temp. | -20°C to +40°C |
| Amps | 42.8A |
| Balancing Method | 1/2 Key |
| Bearing Cap | Yes |
| Bolt Material | Carbon Steel |
| Break Down Torque | 300% |
| Cold Locked Rotor Time | 30 sec. |
| Connection Cables Quantity | 6 |
| De Bearing Seal | No |
| Design | B |
| Drip Cover | Without |
| Duty Cycle | Cont.(S1) |
| Enclosure Rating | IC01 |
| Enclosure Type | Open Dripproof |
| Fan Cover Material | Without Fan Cover |
| Fan Material | Without Fan |
| Flange | Without |
| Frame | 254/6t |
| Frame Material | Rolled Steel |
| Frequency | 60 Hz |
| Grade | Grade 1010/20 |
| Grounding Lugs Type | Superior |
| Impregnation Method | Dip And Bake Polyester |
| Insulation Class | H |
| L. R. Amps | 287A |
| Locked Rotor Time(hot) | 17 sec. |
| Locked Rotor Torque | 240% |
| Lrc | 6.7x(Code H) |
| Main Terminal Box Hole Size | 1.732" |
| Material | Carbon Steel |
| Moment Of Inertia | 1.82 lbs.-sq. ft. |
| Mounting | Foot-Mounted, F-1 |
| Nde Bearing Seal | No |
| No Load Amps | 21.9A |
| No. Of Poles | 4 |
| Noise Level | 64 dBA |
| Output Rating | 11 kW |
| Overload Protector (phenolic) | Without Overload Protector |
| Painting | Only Primer |
| Rated Speed | 1775 RPM |
| Rated Torque | 44.4 lbs.-ft. |
| Rated Voltage | 200V |
| Regreasing System | At Drive End And Non-Drive End |
| Resilient Base | Without |
| Rotation | CW And CCW |
| Service Factor | 1.15 |
| Shaft Material | SAE 1040/45 Carbon Steel |
| Slip | 1.39% |
| Starting Method | Direct On Line |
| Synchronous Speed | 1800 RPM |
| Temp. Rise | 80 K |
| Terminal Block | Without |
| Terminal Box | Left Position |
| Tropicalized Painting | Without |
| Voltage | 200V |
Shipping Info:
| Ship weight (kg) | 85.5 |
Explore Products
- MASTERDRIVES 2B300SF Quick Disconnect Sheave, A/B Section, 2 Groove
- OZ LIFTING PRODUCTS OZPED4 Mounting Base, Pedestal, Steel, Zinc Plated, 2500 Lb Capacity
- SPEEDAIRE TTR4420304G Throttle Valve
- SMC VALVES ZP06BU Vacuum Pad Bellows 6mm
- SMC VALVES NCDA1S150-0200-F59 Tie Rod Cylinder, 1.5 To 4 Inch Bore Range
- MEM CO 1/4BSPP-FLB3 1/2 Barb Fitting, Brass, Female Bspp X Barbed, 1/4 Inch Pipe Size
- SMC VALVES MXS25TN-75A-M9PMAPC Cylinder, Air Slide Table
- APPROVED VENDOR U07890.016.0018 Socket Set Screw, 8-32 Thread Size, Pln, 3/16 In Lg., 5/64 In Drive Size, Knurled Cup
Explore More
- KEYSHAFT
- MASTER COOL
- RAYMOND PRODUCTS
- EXCELTA
- HEPCOMOTION
- Press Fit Fittings
- Wet Mop Kits
- Hydraulic Hose Sleeves
- Retrieving Tools
- Pneumatic Control Valves
- ALLPAX GASKET CUTTER SYSTEMS 3000 Series Light Duty Gasket Cutter Kits
- IRONCLAD Workforce All Purpose Use Gloves
- ANSELL 11-927 Hyflex Medium Duty Oil Repellent Cut Resistant Gloves
- RUD CHAIN VLBG Load Rings, Metric Thread
- ANVIL AS606 Series 3-Hole Corner Angle
- UNGER Scrapers
- ABUS Keyed Coreless Padlocks
- BANJO FITTINGS Dry-Mate Face Seal
- SPEARS VALVES CPVC Schedule 80 Fitting Special Reinforced Reducer Couplings, SS Collar
- AMERICAN TORCH TIP Victor Cutting Tips, HPN Style
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WEG 01518OT3P254T-SGH 15378602 General Purpose Motor, ODP RolLED Steel 254/6T Frame, 15 HP, 1775 RPM, 200 V With Bearing Cap
€2,234.59 /unit