WEG 00158OT3P145T-S 12674793 Electric Motor, 1.5Hp, 60Hz, 1800 Rpm
Get it by Thursday, Dec 18
€535.69 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | General Purpose Motor |
| Altitude | 1000 MASL |
| Ambient Temp. | -20°C to +40°C |
| Balancing Method | 1/2" Key |
| Bearing Cap | No |
| Bolt Material | Carbon Steel |
| Break-down Torque | 330% |
| Cold Locked Rotor Time | 27 sec. |
| Connection Cables Quantity | 6 |
| Design | B |
| Drip Cover | Without |
| Duty Cycle | S1 |
| Efficiency At 1 % | 77% |
| Efficiency At 50 % | 56% |
| Efficiency At 75 % | 69% |
| Enclosure Type | ODP |
| Fan Cover Material | Without Fan Cover |
| Fan Material | Without Fan |
| Flange Type | Without |
| Frame | 143/5T |
| Frame Material | Rolled Steel |
| Frequency | 60 Hz |
| Grounding Lugs | Single |
| Hot Locked Rotor Time | 15 sec. |
| Impregnation Method | Dip And Bake Polyester |
| Insulation Class | Class F |
| L. R. Amps | 41.4A |
| Locked Rotor Torque | 280% |
| Lrc | 8.7X(Code L) |
| Main Terminal Box Hole Size | 1.118" |
| Moment Of Inertia | 0.1426 lbs.-sq. ft. |
| Motor Enclosure Design | Open Dripproof |
| Motor Speed | 1760 RPM |
| Mounting | Foot Mounted |
| No Load Amps | 2.76A |
| No. Of Poles | 4 |
| Noise Level | 52 dBA |
| Output | 1 1/2 hp |
| Output Rating | 1 1/2 hp |
| Overload Protector | Without Overload Protector |
| Painting | Munsell N 1-Matte 207N (ISO 12944-C2) |
| Phase | 3 |
| Power Factor At 1 % | 86.5 |
| Power Factor At 50 % | 84 |
| Power Factor At 75 % | 86.5 |
| Rated Current | 4.76A |
| Rated Torque | 4.48 lbs.-ft. |
| Rated Voltage | 200V AC |
| Resilient Base | Without |
| Rotation | CW/CCW |
| Rpm | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Material | Carbon Steel |
| Shaft Material Grade | Grade 1040/45 |
| Slip | 2.22% |
| Starting Method | Direct On Line |
| Synchronous Speed | 1800 RPM |
| Temp. Rise | 80 K |
| Terminal Block | Without |
| Terminal Box | Left Position |
| Tropicalized Painting | Without |
| Voltage | 200V AC |
Shipping Info:
| Ship weight (kg) | 20.25 |
| Ship height (cm) | 24.38 |
| Ship length (cm) | 39.88 |
| Ship width (cm) | 30.99 |
| Country of Origin | US |
Product Variants
| Model | Phase | Frequency | Service Factor | Hp | Full Load Amps | Nameplate Rpm | Frame | Duty Cycle | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 01518OT3E254T-S | 3 | 60 Hz | 1.15 | 15 hp | 37.2/18.6A | 1775 RPM | 254/6T | S1 | €2,131.82 | |
| 01518OT3H254T-S | 3 | 60 Hz | 1.15 | 15 hp | 14.9A | 1775 RPM | 254/6T | S1 | €2,120.09 | |
| 02036OT3E254T-S | 3 | 60 Hz | 1.15 | 20 hp | 23.8A | 3525 RPM | 254/6T | S1 | €1,984.36 | |
| 02036OT3H254T-S | 3 | 60 Hz | 1.15 | 20 hp | 19A | 3525 RPM | 254/6T | S1 | €2,033.18 | |
| 02018OT3E256T-S | 3 | 50/60 Hz | 1.15 | 20 hp | 50/25A | 1770 RPM | 254/6T | Continuous | €2,426.55 | |
| 02018OT3H256T-S | 3 | 60 Hz | 1.15 | 20 hp | 20A | 1770 RPM | 254/6T | Continuous | €2,094.60 | |
| 02536OT3E256T-S | 3 | 60 Hz | 1.15 | 25 hp | 58.2/29.1A | 3530 RPM | 254/6T | S1 | €2,412.93 |
Explore Products
- OSG 1400146201 Thread Forming Tap Forming 1/2 Inch x 20 S/o
- APPROVED VENDOR SF205DH Drill Bushing Type Slip Fixed Drill Size # 36
- BUNTING BEARINGS EXEW163202 Oil Thrust Washer, Size 1 x 2 x 1/8 Inch, PTFE
- ERICKSON CV40BER16250 Collet Chuck, Cylindrical Shank, Cv40 Taper Size, 0.0200 Inch Min. Collet Capacity
- DDS 365007SF Rotary Shaft Oil Seal, Sf, Nitrile, 36 mm ID, 50 mm Od, 7 mm Width, 7 Psi
- AMPCO SAFETY TOOLS WB-44C Crimped Wire Wheel Brush 6 Inch 1 Inch Width
- SIOUX CHIEF 242-20 Hose Guide, Black Head, Domestic
- COOPER B-LINE FTB18CTBLE Center Trapeze Hanger, Black Powder Coat Finish, Steel, 18 Inch Size
Explore More
- KEYSHAFT
- SENSIT
- TSI SUPERCOOL
- DIXIE LINE CLAMPS
- NORPRENE
- Hazardous Location Control Station Switches
- Hole Drill Bore and Wire Gauges
- Screwdriver Bit Set
- Evaporative Cooler Pads
- Float Valves
- NEWSTRIPE Mid-Size Commercial Compactor
- OIL SAFE Shut-Off Valve Ball Knobs
- CONDOR Coated Gloves, Full Finger, Nitrile Coating, Palm Dipped
- FERNCO Qwik Ells
- KEO Long Series Metric Combined Drills And Countersinks, 60 Degrees Countersink Angle, Cobalt
- SLOAN Automatic Flush Valves
- DEWALT Spade Bit, Hex Shank
- VERMONT GAGE Go Standard Thread Plug Gages, 5/8-20 Un
- CONDOR Lockout Tags
- VESTIL EPC Series Vertical Plate Clamps
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WEG 00158OT3P145T-S 12674793 Electric Motor, 1.5Hp, 60Hz, 1800 Rpm
€535.69 /unit