FREE delivery on orders over €150
WALTER TOOLS DB133-05-00.950A0-WJ30EL 6712851 Micro Drill Bit, 0.95 mm Drill Bit Size, 9 mm Flute Length, 3 mm Shank Dia
Item: CU8YXFModel: DB133-05-00.950A0-WJ30ELCross Ref: 440T41 / 6712851
7 In Stock
0.295"
0.354"
1.969"
Ships within 2 days via
5.00% off
€108.91 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Micro Drill Bit |
| Circuit Board Drill | No |
| Coolant Fed | Non Coolant Through |
| Cutting Direction | Right Hand |
| Cutting Edge Dia. | 0.037" |
| Cutting Edge Length | 0.295" |
| Decimal Equivalent | 0.0374 |
| Depth X Dia. Ratio | 5xd |
| Drill Bit Point Angle | 140° |
| Drill Bit Point Type | Conventional Point |
| Drill Bit Size | 0.95 mm |
| Drill Dia. Tolerance | M7 |
| Finish | Aluminum Chromium Nitride |
| Finish-machining | AlCrn |
| Flute Length | 9 mm |
| Flute Type | Spiral |
| Grade | High Performance |
| Length | 1.969" |
| Material | Carbide |
| Material Grade-machining | HIGH PERFORMANCE |
| Material-machining | Carbide |
| Max. Drilling Depth | 8 mm |
| No. Of Flutes | 2 |
| Overall Length | 50 mm |
| Primary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Steel |
| Primary Material Application Iso Code | K, N, P |
| Secondary Material Application | Composite, Graphite, Hardened Steel, Nickel, Titanium |
| Secondary Material Application Iso Code | H, O, S |
| Shank Dia. | 3 mm |
| Shank Length | 34 mm |
| Shank Type | Straight |
| Shank Type-machining | Straight |
| System Of Measurement | Metric |
Shipping Info:
| Ship height (cm) | 2.54 |
| Ship length (cm) | 5 |
| Ship width (cm) | 2.54 |
| Country of Origin | FR |
Product Variants
| Product | Model | Overall Length | Shank Dia. | Decimal Equivalent | Max. Drilling Depth | Drill Bit Size | Price | |
|---|---|---|---|---|---|---|---|---|
 |
DB130-05-00.990U0-WJ30UU | 25 mm | 1.5 mm | 0.039 | 0.268" | #61 | €51.17 | |
 |
A3162-0.99 | 25 mm | 1.5 mm | 0.039 | 7.3 mm | #61 | - | RFQ
|
 |
A3143-0.94 | 25 mm | 1.5 mm | 0.037 | 0.236" | #63 | €15.41 | |
|
A3162-0.94 | 25 mm | 1.5 mm | 0.037 | 6.47 mm | #63 | - | RFQ
|
|
DB130-05-00.940U0-WJ30UU | 25 mm | 1.5 mm | 0.037 | 0.236" | #63 | €53.27 | |
 |
A3153-0.94 | 25 mm | 1.5 mm | 0.037 | 0.236" | #63 | €28.27 | |
|
A3143-0.89 | 25 mm | 1.5 mm | 0.035 | 0.236" | #65 | €15.91 |
Explore Products
- WESTWARD 4GU80 Vehicle Stand, 10 Tons Per Pair, 16-1/8 x 16-1/8 Inch Base
- FLUX 10-00122301 Follower Plate, Lower, For 480 mm Size
- GENERAL TOOLS & INSTRUMENTS LLC gn80 SCRIBE MACHINIST 8-1/2 POINT
- PARKER FMD09-2B Mufflers, Fittings, Plugs And Peripheral Connectors
- EATON ECC03C8HBA Mechanically Held Lighting Contactor, 30A, NEMA 12, 12P
- SMC VALVES AW40-F04M-B Filter/Regulator
- SMITH COOPER INTERNATIONAL S3016HC012 Half Coupling 1 1/4 Inch Threaded 316 Stainless Steel
- SPEC T40800 Extension Spring, High Precision, Stainless Steel, 7.9 mm Overall Length
Explore More
- AVEN
- KEYSHAFT
- TAPCO
- AETNA BEARING
- RIZON
- Paint Edgers and Refills
- Laboratory Microscopes
- Chemical Neutralizers
- Quick Change Sanding Discs
- OIL SAFE Color Coded Steel Tubes
- ML KISHIGO 3700 Series Incident Command Vests
- RUD CHAIN WBPG Hoist Rings On Plate For Bolting
- TEMPCO TRH3 Series Tubular Radiant Heaters
- ANVIL AS520S Series Channel With Long Slots
- VULCAN HART Heat Shield, Front
- START INTERNATIONAL ZCM2200 Series, Safety Guard System Tape Dispensers
- APPROVED VENDOR 60mm For Shaft Dia. Stainless Steel Internal Retaining Rings
- DAYTON Lock Washers
- BOSTON GEAR 48 Diametral Pitch Brass Spur Gears, 20 Degree Pressure Angle
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WALTER TOOLS DB133-05-00.950A0-WJ30EL 6712851 Micro Drill Bit, 0.95 mm Drill Bit Size, 9 mm Flute Length, 3 mm Shank Dia
€114.64 /unit