FREE delivery on orders over €150
WALTER TOOLS DB130-05-00.930U0-WJ30UU 7233476 Micro Drill Bit, 0.93 mm Drill Bit Size, 7/32 Inch Flute Length, 1.50 mm Shank Dia
Item: CU8YWZModel: DB130-05-00.930U0-WJ30UUCross Ref: 488G03 / 7233476
7 In Stock
Ships within 2 days via
10.00% off
€46.05 /unit
This product can only be shipped in multiples of 5Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Micro Drill Bit |
| Circuit Board Drill | No |
| Coolant Fed | Non Coolant Through |
| Cutting Direction | Right Hand |
| Decimal Equivalent | 0.0366 |
| Depth X Dia. Ratio | 5xd |
| Drill Bit Point Angle | 140° |
| Drill Bit Point Type | Conventional Point |
| Drill Bit Size | 0.93 mm |
| Drill Diameter Tolerance | -0.004 mm to 0 mm |
| Finish | Bright, Uncoated |
| Finish - Machining | Bright (Uncoated) |
| Flute Length | 7/32" |
| Flute Type | Spiral |
| Grade | Grade K30F |
| Material | Carbide |
| Material - Machining | Carbide |
| Material Grade - Machining | Grade K30F |
| Max. Drilling Depth | 0.236" |
| Number Of Flutes | 2 |
| Overall Length | 25 mm |
| Primary Material Application | Aluminum, Brass, Bronze, Cast Iron, Composite, Copper, Nickel, Stainless Steel, Steel, Titanium |
| Primary Material Application Iso Code | K, M, N, O, P, S |
| Shank Dia. | 1.5 mm |
| Shank Length | 19 mm |
| Shank Type | Straight |
| Shank Type - Machining | Straight |
| Standards | Din 1899 |
| System Of Measurement | Metric |
Shipping Info:
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
| Country of Origin | FR |
Product Variants
| Product | Model | Overall Length | Decimal Equivalent | Shank Dia. | Drill Bit Size | Max. Drilling Depth | Price | |
|---|---|---|---|---|---|---|---|---|
|
DB130-05-00.990U0-WJ30UU | 25 mm | 0.039 | 1.5 mm | #61 | 0.268" | €51.17 | |
 |
A3162-0.99 | 25 mm | 0.039 | 1.5 mm | #61 | 7.3 mm | - | RFQ
|
 |
A3143-0.94 | 25 mm | 0.037 | 1.5 mm | #63 | - | €15.41 | |
|
A3162-0.94 | 25 mm | 0.037 | 1.5 mm | #63 | 6.47 mm | - | RFQ
|
|
DB130-05-00.940U0-WJ30UU | 25 mm | 0.037 | 1.5 mm | #63 | 0.236" | €53.27 | |
 |
A3153-0.94 | 25 mm | 0.037 | 1.5 mm | #63 | 0.236" | €28.27 | |
|
A3143-0.89 | 25 mm | 0.035 | 1.5 mm | #65 | 0.236" | €15.91 |
Explore Products
- MARTIN SPROCKET 24A38 Sprocket, 24B-1 Chain, 38 Teeth, 461.374 mm Pitch Dia., 483.599 mm O.D., Steel
- VIKAN 64007 Small Hand Scoop 32 Ounce Orange Poly
- BUSSMANN HVL-1/2 Medium Voltage Fuse, 500mA, 10kVAC
- MAIN FILTER INC. MF0506709 SP150B212NR60V Interchange Hydraulic Filter, Wire Mesh, 60 Micron, Seal, 8.346 Inch Height
- DORIAN E16M-M-SWLCL-06
- INSIZE 4112-BD1008 Gauge Block, Rectangular, 0.1008 Inch Nominal Size, 6 Micro Inch Tolerance
- MAIN FILTER INC. MF0396812 RE070G20B Interchange Hydraulic Filter, Glass, 25 Micron Rating, Viton Seal, 7.99 Inch Height
- MORSE CUTTING TOOLS 44156 Cutting End Mill, 9/16 x 1/2 x 1Â 3/8 x 3Â 3/8 Inch Size, 4 Flute, Single End
Explore More
- ANVIL
- KEYSHAFT
- ONYX
- DURAPULSE
- TRIPLETT
- Cable Pulling Mesh Grips
- Floor Polishers
- Wire Wrap and Unwrap Tools
- Microscope Cameras
- Speaker Accessories
- IRONCLAD Workcrew Light Duty Gloves
- DESTACO 341-M Series Pull Action Latch Clamps
- TEMPCO PCT-1000 Series Thermostat Controls
- KEO Metric NC Spotting Drills, Long
- HYDE Joint Knife
- WESTWARD Alignment Pry Bar
- GENERAL ELECTRIC Molded Case Circuit Breakers: TQDL Series
- MI-T-M Deflectors
- NORTON ABRASIVES Wire Wheel Brushes
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WALTER TOOLS DB130-05-00.930U0-WJ30UU 7233476 Micro Drill Bit, 0.93 mm Drill Bit Size, 7/32 Inch Flute Length, 1.50 mm Shank Dia
€51.17 /unit