FREE delivery on orders over €150
WALTER TOOLS A3153-0.55 5062994 Micro Drill Bit, 0.55 mm Drill Bit Size, 1/8 Inch Flute Length, 1 mm Shank Dia
Item: CU8YQTModel: A3153-0.55Cross Ref: 440R65 / 5062994
7 In Stock
Ships within 2 days via
10.00% off
€18.90 /unit
This product can only be shipped in multiples of 10Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Micro Drill Bit |
| Circuit Board Drill | No |
| Coolant Fed | Non Coolant Through |
| Cutting Direction | Left Hand |
| Depth X Dia. Ratio | 5xd |
| Drill Bit Point Angle | 118° |
| Drill Bit Point Type | 2 Facet Point |
| Drill Bit Size | 0.55 mm |
| Drill Diameter Tolerance | -0.004 mm to 0 mm |
| Finish | Bright, Uncoated |
| Finish - Machining | Bright (Uncoated) |
| Flute Length | 1/8" |
| Flute Type | Spiral |
| Grade | High Performance |
| Material | High Speed Steel |
| Material - Machining | High Speed Steel |
| Material Grade - Machining | HIGH PERFORMANCE |
| Max. Drilling Depth | 0.154" |
| Number Of Flutes | 2 |
| Overall Length | 25 mm |
| Primary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Nickel, Steel, Titanium |
| Primary Material Application Iso Code | K, N, P, S |
| Secondary Material Application | Composite, Graphite, Stainless Steel |
| Secondary Material Application Iso Code | M, O |
| Shank Dia. | 1 mm |
| Shank Length | 21.1 mm |
| Shank Type | Straight |
| Shank Type - Machining | Straight |
| Standards | Din 1899 |
| System Of Measurement | Metric |
Shipping Info:
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
| Country of Origin | FR |
Product Variants
| Product | Model | Overall Length | Decimal Equivalent | Shank Dia. | Drill Bit Size | Max. Drilling Depth | Price | |
|---|---|---|---|---|---|---|---|---|
 |
DB130-05-00.990U0-WJ30UU | 25 mm | 0.039 | 1.5 mm | #61 | 0.268" | €51.17 | |
 |
A3162-0.99 | 25 mm | 0.039 | 1.5 mm | #61 | 7.3 mm | - | RFQ
|
 |
A3143-0.94 | 25 mm | 0.037 | 1.5 mm | #63 | - | €15.41 | |
|
A3162-0.94 | 25 mm | 0.037 | 1.5 mm | #63 | 6.47 mm | - | RFQ
|
|
DB130-05-00.940U0-WJ30UU | 25 mm | 0.037 | 1.5 mm | #63 | 0.236" | €53.27 | |
 |
A3153-0.94 | 25 mm | 0.037 | 1.5 mm | #63 | 0.236" | €28.27 | |
|
A3143-0.89 | 25 mm | 0.035 | 1.5 mm | #65 | 0.236" | €15.91 |
Explore Products
- ANSELL 11-280 Cut-Resistant Sleeve, Ansi/Isea Cut Level A4, Gray, Knit Cuff
- MARTIN SPROCKET ML276 1 1/4 Jaw Coupling, 1/4 Inch Size
- MONOPRICE 43018
- WEG PESWS-B18V24AX-RM65 14655542 Magnetic Motor Starter, 180-208V at 50HZ/208-240V at 60HZ
- PALMETTO PACKING 1367S Packing Seal 1/2 Square inch 5 Feet
- ARO 94245-1 Diaphragm Pump
- SMC VALVES VM230-N02-08A Mechanical Valve, 1/4 Port Size
- APPROVED VENDOR U04005.075.0200 Structural Bolt, 3/4 In - 10 Thread Size, Steel, 2 In Lg., Blk Oxide, Gr. A325
Explore More
- CCL
- KEYSHAFT
- ONSRUD
- ONILOC
- ABB
- Finned Strip Heaters
- Photoelectric Area Sensors
- CAM Handles
- Self Locking Inserts
- Door Locks
- OIL SAFE Storage Lids
- KEO Metric Precision 3-Flute Cap Screw Kounterbores
- MUELLER INDUSTRIES 1603-AC Chexter Check Valves
- WRIGHT TOOL 1/2 Inch Drive Metric Impact Hex Bit Sockets
- BOSCH Electronic Modules
- SPEC Metric Compression Springs, Stainless Steel, 7.55 mm Outside Dia.
- FEDERAL SIGNAL FB2PST-I Fireball Strobe Warning Lights
- SOLBERG F/FT Series Inlet Filters
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
WALTER TOOLS A3153-0.55 5062994 Micro Drill Bit, 0.55 mm Drill Bit Size, 1/8 Inch Flute Length, 1 mm Shank Dia
€21.00 /unit