RULAND MANUFACTURING FHT-MCL-48-SS 48mm Face Mount Shaft Collar with Tapped Hole, 303 SS, One-Piece Clamp Style, 78mm OD, 19mm Wd.
Get it by Tuesday, Feb 24
€ 24,99 Flat Shipping + VAT € 24,99 flat shipping is applicable on orders with an aggregate weight less than 10kg. Orders exceeding 10kg will be charged default shipping rates.
5.00% off
€399.22 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Shaft Collar |
| Bore Dia. | 48 mm |
| Bore Tolerance | 0.012 mm to 0.5 mm |
| Bore Type | Round |
| Clearance Dia. | 84.7 mm |
| Collar Construction | 1-Piece |
| Collar Material | Stainless Steel |
| Collar Material Finish | Bright |
| Collar Material Grade | Grade 303 |
| Collar Outside Diameter | 78 mm |
| Collar Width | 19 mm |
| Component Mount Type | Face Mount Holes |
| Construction | One Piece |
| For Shaft Dia. | 48 mm |
| For Shaft Diameter | 48 mm |
| For Shaft Type | Round |
| Included Screws | Clamp Screw |
| Max. Operating Temp. | 176°C |
| Min. Operating Temp. | -40°C |
| Mount Hole Thread Size | M8 |
| Outside Dia. | 78 mm |
| Resistance Properties | Corrosion Resistant |
| Screw Length | 25 mm |
| Screw Location From Center | 32 mm |
| Screw Material | Stainless Steel |
| Screw Material Finish | Bright |
| Screw Material Grade | Grade 18-8, 300 Series |
| Screw Seating Torque | 23 N-m |
| Screw Thread Size | M8 x 25 |
| Shaft Locking Type | Clamp On |
| Shaft Tolerance | -0.013 mm to 0 mm |
| System Of Measurement | Metric |
| Width Tolerance | -0.254 mm to +0.076 mm |
Shipping Info:
| Ship weight (kg) | 0.41 |
| Ship height (cm) | 7.8 |
| Ship length (cm) | 1.9 |
| Ship width (cm) | 1.9 |
| Country of Origin | US |
Product Variants
| Product | Model | Bore Dia. | Outside Dia. | Collar Material | Screw Location From Center | Screw Material Finish | Mount Hole Thread Size | Screw Material | Clearance Dia. | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
FHT-MCL-10-AN | 10 mm | 24 mm | Aluminum | 8.51 mm | Bright | M3 | Stainless Steel | 26.3 mm | €65.20 | |
 |
FHT-MCL-10-F | 10 mm | 24 mm | Carbon Steel | 8.51 mm | Black Oxide | M3 | Alloy Steel | - | €24.94 | |
 |
FHT-MCL-10-SS | 10 mm | - | Stainless Steel | 8.51 mm | Bright | M3 | Stainless Steel | 26.3 mm | €50.88 | |
|
FHT-MCL-11-AN | 11 mm | 28 mm | Aluminum | 10.01 mm | Bright | M4 | Stainless Steel | 32 mm | €66.72 | |
|
FHT-MCL-11-F | 11 mm | 28 mm | Carbon Steel | 10.01 mm | Black Oxide | M4 | Alloy Steel | 32 mm | €26.30 | |
|
FHT-MCL-11-SS | 11 mm | 28 mm | Stainless Steel | 10.01 mm | Bright | M4 | Stainless Steel | 32 mm | €51.62 | |
|
FHT-MCL-12-AN | 12 mm | 28 mm | Aluminum | 10.01 mm | Bright | M4 | Stainless Steel | 32 mm | €66.72 |
Explore Products
- REGAL 007262AS43 Hand Tap, M8 x 1.25 Size, D2 Limit, 4 Flutes, STI Bottom With Steam Oxide
- TB WOODS D380RB Clutch Assembly
- APOLLO VALVES LD14104BE14A International Lugged Butterfly Valve with Aluminum Disc, EPDM Seat, SS Shaft, Locking Handle 4 Inch, 2 x Lug Type
- INSIZE ISY-200-3 Base Plate, 300 mm x 300 mm, 12 mm Base Plate Height, M8 Thread Size
- SQUARE D KA26200AC Circuit Breaker I-line Style Plug-in 200 Amp 600vac 2p 25kaic@480v
- INGERSOLL-RAND 637401-SV Service Kit
- OSG 1115710608 Spiral Point Tap Plug 10x1.25mm Ticn
- REGAL 027426AS85 Hand Tap, M5 x .8 Size, 4 Flutes, Bottom, +.127mm With TiCN Coating
Explore More
- KEYSHAFT
- US TAPE
- MECHANIX
- TRUESEAL
- Water Heater Accessories
- Beam Clamps
- Rubber Edging
- Actuator Accessories
- Conical Washers
- MUELLER INDUSTRIES 862SS Y Strainers
- RUD CHAIN LRBS-FIX/LRBK-FIX Rings
- RUD CHAIN B-ABA Lifting Points
- SIEMENS SHLD Series Bolt On Molded Case Circuit Breakers
- LABELMASTER Placard Holder
- HONEYWELL Control Ball Valves
- HUMBOLDT Aluminum Beakers
- SANDPIPER Rod, Diaphragm
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
RULAND MANUFACTURING FHT-MCL-48-SS 48mm Face Mount Shaft Collar with Tapped Hole, 303 SS, One-Piece Clamp Style, 78mm OD, 19mm Wd.
€420.23 /unit