Shaft Collars
Shaft collars are ring-shaped components that secure and enclose shafts in machining applications. They serve three main purposes holding, positioning and providing a point of contact
...Read more
AAME INTERNATIONAL -
Locking Collar Sets
A
BCLIMAX METAL PRODUCTS -
Shaft Collar
A
B| Style | Model | Collar Material | Bore Dia. | Outside Dia. | Material | Screw Material | Operating Temp. Range | Screw Length | Collar Width | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | M1C-06 | €14.58 | |||||||||
| B | CR2C-050-S | €95.93 | |||||||||
| B | CR2C-062-S | €106.03 | |||||||||
| B | CR2C-075-S | €123.91 | |||||||||
| B | CR2C-100-S | €146.12 | |||||||||
| B | CR2C-125-S | €192.36 |
STAFFORD MFG -
Solution Series, One Piece Split Shaft Mounting Collars
A
BSTAFFORD MFG -
Solution Series, Hinge Type Shaft Mounting Collars
A
B| Style | Model | Outside Dia. | Material | Screw Material | Bore Size | Type | Screw Length | Screw Size | Bottom Threaded Hole Size | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 32S012HCP | €150.55 | RFQ | ||||||||
| B | 32L012HCP | €61.67 | RFQ | ||||||||
| B | 32L100HCP | €82.74 | RFQ | ||||||||
| A | 32S100HCP | €155.47 | RFQ | ||||||||
| B | 32L102HCP | €127.60 | RFQ | ||||||||
| A | 32S102HCP | €161.86 | RFQ | ||||||||
| B | 32L106HCP | €139.30 | RFQ | ||||||||
| A | 32S106HCP | €286.27 | RFQ | ||||||||
| B | 32L108HCP | €135.47 | RFQ | ||||||||
| A | 32S108HCP | €287.55 | RFQ | ||||||||
| B | 32L104HCP | €134.69 | RFQ | ||||||||
| A | 32S104HCP | €197.19 | RFQ |
STAFFORD MFG -
Solution Series, Hinge Type Pipe Mounting Collars
A
B| Style | Model | Type | Outside Dia. | Material | Screw Material | Bore Size | Pipe Size | Screw Length | Screw Size | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 32S101HPCP | - | RFQ | ||||||||
| A | 32S105HPCP | - | RFQ | ||||||||
| A | 32S114HPCP | €168.25 | RFQ | ||||||||
| B | 32L114HPCP | €122.06 | RFQ | ||||||||
| B | 32L101HPCP | - | RFQ | ||||||||
| B | 32L105HPCP | - | RFQ | ||||||||
| A | 32S011HPCP | - | RFQ | ||||||||
| A | 32S014HPCP | €140.58 | RFQ | ||||||||
| A | 32S111HPCP | €155.79 | RFQ | ||||||||
| B | 32L014HPCP | €103.97 | RFQ | ||||||||
| B | 32L111HPCP | €112.71 | RFQ | ||||||||
| B | 32L011HPCP | - | RFQ |
RULAND MANUFACTURING -
Two Piece Shaft Collars
A
B
C
D
E
F
G| Style | Model | Outside Dia. | Collar Material | Bore Dia. | Screw Material | Clearance Dia. | Collar Material Finish | Screw Location From Center | Shaft Tolerance | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | MSP5EFZ | €27.06 | |||||||||
| B | MSP30EST | €518.86 | |||||||||
| C | MSP-4E-FZ | €27.06 | |||||||||
| D | MSP-7E-P | €38.80 | |||||||||
| C | MSP-7E-FZ | €29.84 | |||||||||
| C | MSP-8E-FZ | €32.24 | |||||||||
| C | MSP-9E-FZ | €33.19 | |||||||||
| E | MSP-9E-AN | €62.13 | |||||||||
| F | MSP-9E-SS | €66.04 | |||||||||
| F | MSP-9E-ST | €133.46 | |||||||||
| C | MSP-10E-FZ | €26.40 | |||||||||
| G | MSP-9E-F | €25.64 | |||||||||
| D | MSP-9E-P | €44.22 | |||||||||
| F | MSP-11E-SS | €70.70 | |||||||||
| D | MSP-11E-P | €53.79 | |||||||||
| E | MSP-11E-AN | €64.91 | |||||||||
| G | MSP-11E-F | €28.27 | |||||||||
| F | MSP-11E-ST | €178.72 | |||||||||
| C | MSP-11E-FZ | €35.93 | |||||||||
| C | MSP-12E-FZ | €37.23 | |||||||||
| C | MSP-13E-FZ | €47.95 | |||||||||
| F | MSP-13E-ST | €167.97 | |||||||||
| D | MSP-13E-P | €55.30 | |||||||||
| G | MSP-13E-F | €34.13 | |||||||||
| C | MSP-14E-FZ | €47.95 |
RULAND MANUFACTURING -
One Piece Shaft Collars
A
B
C
D
E
F
G| Style | Model | Outside Dia. | Collar Material | Bore Dia. | Screw Material | Clearance Dia. | For Shaft Dia. | Screw Location From Center | Bore Tolerance | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | MCL-4E-FZ | €17.53 | |||||||||
| B | MCL-7-P | €17.72 | |||||||||
| A | MCL-5E-FZ | €17.53 | |||||||||
| A | MCL-6E-FZ | €18.71 | |||||||||
| A | MCL-7E-FZ | €19.94 | |||||||||
| C | MCL-7E-P | €22.91 | |||||||||
| A | MCL-8E-FZ | €22.34 | |||||||||
| D | MCL-9E-F | €15.37 | |||||||||
| A | MCL-9E-FZ | €22.17 | |||||||||
| E | MCL-9E-AN | €40.20 | |||||||||
| F | MCL-9E-ST | €117.48 | |||||||||
| A | MCL-10E-FZ | €22.17 | |||||||||
| F | MCL-9E-SS | €42.61 | |||||||||
| C | MCL-9E-P | €26.77 | |||||||||
| A | MCL-11E-FZ | €24.65 | |||||||||
| G | MCL-11E-SS | €46.96 | |||||||||
| D | MCL-11E-F | €17.72 | |||||||||
| F | MCL-11E-ST | €137.51 | |||||||||
| C | MCL-11E-P | €37.66 | |||||||||
| E | MCL-11E-AN | €44.31 | |||||||||
| A | MCL-12E-FZ | €26.83 | |||||||||
| A | MCL-13E-FZ | €34.55 | |||||||||
| E | MCL-13E-AN | €51.77 | |||||||||
| F | MCL-13E-SS | €62.66 | |||||||||
| C | MCL-13E-P | €37.58 |
RULAND MANUFACTURING -
Clamping Lever Shaft Collars
A
B
C
D
E
F
G| Style | Model | Collar Material | Bore Dia. | Outside Dia. | For Shaft Dia. | Center To Lever Top | Handle Color | Lever Length | Collar Material Finish | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | LVO-MSP-40-FZ | €141.41 | |||||||||
| B | LV-MSP-15-FZ | €112.06 | |||||||||
| A | LVO-MSP-38-FZ | €141.41 | |||||||||
| C | LV-MCL-38-FZ | €133.09 | |||||||||
| B | LV-MSP-38-FZ | €143.36 | |||||||||
| D | LVO-MCL-36-FZ | €130.97 | |||||||||
| C | LV-MCL-34-FZ | €132.27 | |||||||||
| B | LV-MSP-34-FZ | €141.05 | |||||||||
| A | LVO-MSP-32-FZ | €134.88 | |||||||||
| E | LVO-MCL-32-FZ | €127.71 | |||||||||
| F | LV-MCL-30-FZ | €125.54 | |||||||||
| G | LVO-MSP-30-FZ | €133.51 | |||||||||
| C | LV-MCL-32-FZ | €127.71 | |||||||||
| C | LV-MCL-40-FZ | €132.19 | |||||||||
| C | LV-MCL-26-FZ | €122.76 | |||||||||
| A | LVO-MSP-23-FZ | €133.41 | |||||||||
| C | LV-MCL-18-FZ | €104.28 | |||||||||
| D | LVO-MCL-17-FZ | €104.28 | |||||||||
| A | LVO-MSP-17-FZ | €114.51 | |||||||||
| B | LV-MSP-50-FZ | €197.71 | |||||||||
| C | LV-MCL-50-FZ | €186.22 | |||||||||
| B | LV-MSP-48-FZ | €203.75 | |||||||||
| C | LV-MCL-48-FZ | €189.13 | |||||||||
| B | LV-MSP-45-FZ | €189.69 | |||||||||
| A | LVO-MSP-36-FZ | €141.41 |
RULAND MANUFACTURING -
Mountable Shaft Collars
A
B| Style | Model | Outside Dia. | Bore Dia. | Screw Length | Construction | For Shaft Dia. | Screw Location From Center | Bore Tolerance | Included Screws | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | OF-MSP-10-AN | €90.79 | |||||||||
| B | OF-MCL-10-AN | €69.90 | |||||||||
| A | OF-MSP-12-AN | €91.51 | |||||||||
| B | OF-MCL-12-AN | €71.57 | |||||||||
| A | OF-MSP-16-AN | €97.21 | |||||||||
| B | OF-MCL-16-AN | €74.35 | |||||||||
| A | OF-MSP-20-AN | €103.81 | |||||||||
| B | OF-MCL-20-AN | €77.69 | |||||||||
| B | OF-MCL-25-AN | €82.36 | |||||||||
| A | OF-MSP-25-AN | €108.34 | |||||||||
| A | OF-MSP-30-AN | €135.67 | |||||||||
| B | OF-MCL-30-AN | €113.33 | |||||||||
| A | OF-MSP-35-AN | €164.10 | |||||||||
| B | OF-MCL-35-AN | €132.33 | |||||||||
| B | OF-MCL-40-AN | €135.07 | |||||||||
| A | OF-MSP-40-AN | €173.35 |
BOSTON GEAR -
SC Series Steel Set Screw Collars
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y| Style | Model | Collar Style | Material | Finish | Price | |
|---|---|---|---|---|---|---|
| A | SC225 | €180.50 | ||||
| B | SC168 | €103.46 | ||||
| C | SC62 | €28.10 | ||||
| D | SC256 | €275.70 | ||||
| E | SC137 | €71.31 | ||||
| F | SC118 | €59.72 | ||||
| G | SC231 | €182.19 | ||||
| H | SC250 | €229.12 | ||||
| I | SC193 | €142.48 | ||||
| J | SC237 | €193.12 | ||||
| K | SC75 | €29.11 | ||||
| L | SC275 | €322.97 | ||||
| M | SC268 | €304.47 | ||||
| N | SC300 | €400.87 | ||||
| O | SC156 | €98.92 | ||||
| P | SC293 | €372.26 | ||||
| Q | SC212 | €168.87 | ||||
| R | SC187 | €136.75 | ||||
| S | SC125 | €60.56 | ||||
| T | SC243 | €229.12 | ||||
| U | SC143 | €74.53 | ||||
| V | SC106 | €54.17 | ||||
| W | SC68 | €28.61 | ||||
| X | SC18 | €17.94 | ||||
| Y | SC56 | €21.53 |
CLIMAX METAL PRODUCTS -
2C Series Shaft Collar
A
B
C| Style | Model | Outside Dia. | Collar Material | Bore Dia. | Material | Screw Material | Operating Temp. Range | Clearance Dia. | Screw Length | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 2C-162-S | €199.12 | |||||||||
| A | 2C-050-S | €42.05 | |||||||||
| B | 2C-050-A | €22.24 | |||||||||
| C | 2C-018 | €18.68 | |||||||||
| A | 2C-031-S | €29.56 | |||||||||
| A | 2C-025-S | €29.74 | |||||||||
| A | 2C-018-S | €28.27 | |||||||||
| A | 2C-012-S | €28.27 | |||||||||
| B | 2C-031-A | €24.09 | |||||||||
| B | 2C-025-A | €24.48 | |||||||||
| B | 2C-018-A | €26.73 | |||||||||
| B | 2C-012-A | €28.27 | |||||||||
| C | 2C-031 | €18.88 | |||||||||
| C | 2C-012 | €24.96 | |||||||||
| C | 2C-025 | €17.56 | |||||||||
| C | 2C-043 | €18.67 | |||||||||
| B | 2C-043-A | €27.28 | |||||||||
| A | 2C-043-S | €37.95 | |||||||||
| C | 2C-075 | €22.25 | |||||||||
| B | 2C-075-A | €26.07 | |||||||||
| A | 2C-075-S | €54.71 | |||||||||
| C | 2C-050 | €17.09 | |||||||||
| C | 2C-100 | €25.02 | |||||||||
| B | 2C-100-A | €27.36 | |||||||||
| A | 2C-100-S | €63.86 |
CLIMAX METAL PRODUCTS -
1C Series Shaft Collar
A
B
C| Style | Model | Outside Dia. | Collar Material | Bore Dia. | Material | Screw Material | Operating Temp. Range | Clearance Dia. | Screw Length | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 1C-031 | €9.18 | |||||||||
| B | 1C-025-A | €9.28 | |||||||||
| C | 1C-025-S | €19.99 | |||||||||
| C | 1C-018-S | €20.48 | |||||||||
| C | 1C-031-S | €19.64 | |||||||||
| C | 1C-012-S | €20.66 | |||||||||
| A | 1C-012 | €12.32 | |||||||||
| A | 1C-018 | €11.75 | |||||||||
| A | 1C-025 | €9.60 | |||||||||
| B | 1C-018-A | €10.23 | |||||||||
| B | 1C-012-A | €15.41 | |||||||||
| B | 1C-031-A | €11.51 | |||||||||
| A | 1C-043 | €12.15 | |||||||||
| B | 1C-043-A | €12.27 | |||||||||
| C | 1C-043-S | €27.14 | |||||||||
| A | 1C-075 | €9.67 | |||||||||
| B | 1C-075-A | €17.92 | |||||||||
| C | 1C-075-S | €40.60 | |||||||||
| B | 1C-050-A | €12.64 | |||||||||
| A | 1C-050 | €10.60 | |||||||||
| C | 1C-050-S | €30.63 | |||||||||
| B | 1C-100-A | €19.74 | |||||||||
| A | 1C-100 | €18.35 | |||||||||
| C | 1C-100-S | €50.45 | |||||||||
| B | 1C-093-A | €24.61 |
DAYTON -
Shaft Collar
The clamp-style and set screw Dayton shaft collars are widely used in power transmission applications to secure components such as bearings and sprockets on shafts, serve as mechanical stops and locate components in motors and gearbox assemblies. The brand's single- and two-piece clamping shaft collars are designed to easily be wrapped around a hard or soft shaft without marring to provide a tight fit and deliver evenly distributed clamping force. These adjustable and easy-to-remove shaft collars offer high axial load capabilities while minimising shaft distortion for superior performance and decreased wear & tear. A variety of set screw shaft collars (or solid shaft collars), in both metric and SAE dimensions, is also available.
The clamp-style and set screw Dayton shaft collars are widely used in power transmission applications to secure components such as bearings and sprockets on shafts, serve as mechanical stops and locate components in motors and gearbox assemblies. The brand's single- and two-piece clamping shaft collars are designed to easily be wrapped around a hard or soft shaft without marring to provide a tight fit and deliver evenly distributed clamping force. These adjustable and easy-to-remove shaft collars offer high axial load capabilities while minimising shaft distortion for superior performance and decreased wear & tear. A variety of set screw shaft collars (or solid shaft collars), in both metric and SAE dimensions, is also available.
A
B
C| Style | Model | Collar Style | Type | Collar Material | Outside Dia. | Bore Dia. | Material | Number Of Pieces | Inside Dia. | Price | Pkg. Qty. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 1L683 | €46.32 | 1 | |||||||||
| A | 1L676 | €16.21 | 1 | |||||||||
| B | 1L698 | €15.37 | 1 | |||||||||
| B | 1L699 | €17.73 | 1 | |||||||||
| B | 1L700 | €20.49 | 1 | |||||||||
| B | 1L701 | €19.66 | 1 | |||||||||
| B | 1L702 | €21.51 | 1 | |||||||||
| B | 1L703 | €23.24 | 1 | |||||||||
| A | 1L675 | €15.80 | 1 | |||||||||
| A | 1L677 | €22.61 | 1 | |||||||||
| B | 1L696 | €15.81 | 1 | |||||||||
| A | 1L678 | €23.97 | 1 | |||||||||
| A | 1L679 | €28.91 | 1 | |||||||||
| A | 1L680 | €23.80 | 1 | |||||||||
| A | 1L681 | €28.27 | 1 | |||||||||
| A | 1L682 | €40.93 | 1 | |||||||||
| A | 1L686 | €70.70 | 1 | |||||||||
| A | 1L687 | €76.83 | 1 | |||||||||
| B | 1L697 | €15.11 | 1 | |||||||||
| B | 1L695 | €15.08 | 1 | |||||||||
| A | 1L691 | €159.40 | 1 | |||||||||
| C | 1L665 | €14.13 | 1 | |||||||||
| C | 1L658 | €7.93 | 1 | |||||||||
| C | 1L659 | €10.59 | 1 | |||||||||
| C | 1L660 | €8.16 | 1 |
STAFFORD MFG -
Solution Series, Remachineable Shaft Collars
A
B| Style | Model | Outside Dia. | Screw Length | Pilot Hole Size | Screw Size | Bore Size | Type | Material | Finish | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 8L012REM | €23.08 | RFQ | ||||||||
| B | 7L012REM | €47.48 | RFQ | ||||||||
| B | 7L008REM | - | RFQ | ||||||||
| A | 8L008REM | - | RFQ | ||||||||
| B | 7L100REM | - | RFQ | ||||||||
| A | 8L100REM | €23.08 | RFQ | ||||||||
| B | 7L010REM | - | RFQ | ||||||||
| A | 8L010REM | €32.22 | RFQ | ||||||||
| B | 7L112REM | - | RFQ | ||||||||
| A | 8L112REM | - | RFQ | ||||||||
| B | 7L109REM | - | RFQ | ||||||||
| A | 8L109REM | - | RFQ | ||||||||
| A | 8L104REM | - | RFQ | ||||||||
| B | 7L104REM | - | RFQ | ||||||||
| B | 7L200REM | €30.17 | RFQ | ||||||||
| A | 8L200REM | - | RFQ |
A| Style | Model | MPN | Price | |
|---|---|---|---|---|
| A | sshc204-12 | - | RFQ | |
| A | SSHC205-16 | €76.96 | RFQ | |
| A | sshc206-19 | - | RFQ | |
| A | sshc207-20 | - | RFQ | |
| A | sshc207-23 | - | RFQ | |
| A | sshc208-24 | - | RFQ | |
| A | sshc210-31 | - | RFQ | |
| A | sshp4-3/4 | - | RFQ | |
| A | sshp5-1 | - | RFQ | |
| A | sshp6-1-3/16 | - | RFQ | |
| A | sshp7-1-1/4 | - | RFQ | |
| A | sshp7-1-7/16 | - | RFQ | |
| A | sshp8-1-1/2 | - | RFQ | |
| A | sshp10-1-15/16 | - | RFQ |
AATIMKEN -
Zinc Plated Steel Shaft Collars, Imperial
A
BARULAND MANUFACTURING -
TSP Series Right-Hand Threaded Split Shaft Collars, Two-Piece, Inch
A
B| Style | Model | Outside Dia. | Collar Material | Bore Dia. | Clearance Dia. | Material | Screw Material | Collar Width | Collar Material Finish | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | TSP-7-14-SS | €61.71 | |||||||||
| B | TSP-14-14-F | €43.09 | |||||||||
| A | TSP-6-24-SS | €49.73 | |||||||||
| A | TSP-8-13-SS | €62.30 | |||||||||
| B | TSP-8-20-F | €30.20 | |||||||||
| A | TSP-32-12-SS | €381.34 | |||||||||
| B | TSP-32-12-F | €123.09 | |||||||||
| B | TSP-7-14-F | €28.61 | |||||||||
| B | TSP-7-20-F | €28.27 | |||||||||
| A | TSP-7-20-SS | €61.71 | |||||||||
| B | TSP-8-13-F | €30.85 | |||||||||
| A | TSP-10-11-SS | €68.35 | |||||||||
| B | TSP-12-10-F | €36.30 | |||||||||
| A | TSP-10-18-SS | €70.76 | |||||||||
| B | TSP-10-18-F | €33.52 | |||||||||
| B | TSP-10-11-F | €34.24 | |||||||||
| A | TSP-14-14-SS | €96.88 | |||||||||
| A | TSP-16-8-SS | €108.94 | |||||||||
| B | TSP-16-12-F | €43.97 | |||||||||
| A | TSP-14-9-SS | €96.88 | |||||||||
| B | TSP-14-9-F | €43.09 | |||||||||
| A | TSP-20-12-SS | €139.60 | |||||||||
| B | TSP-2-32-F | €26.49 | |||||||||
| B | TSP-20-7-F | €68.64 | |||||||||
| A | TSP-20-7-SS | €154.34 |
Shaft Collars
Raptor Supplies provides a wide range of shaft collars used for positioning devices on medical equipment and holding shaft components, such as bearings, sprockets and pulleys in place, as well as holding up a flag on flag poles. We offer one- / two-piece clamps, quick clamps and set screw / threaded collars from brands, like Boston Gear, Climax Metal Products, Dayton & Ruland Manufacturing Co. Inc.. The setscrew collars from Boston Gear are designed for applications requiring hygienic cleanliness, thereby ideal for use in the food packaging industry with a maximum operating temperature of 800 deg F. These non-magnetic collars come equipped with a standard hollow point setscrew to allow easy inspection of locked parts.
Climax Metal Products manufactures a wide variety of shaft collars compatible with imperial shaft sizes between 1/16 and 6 inches and metric shaft sizes from 2 mm to 80 mm. These shaft collars are made from mild steel / type 303 / 316 stainless steel for maximum shock resistance and are available in non-plated, black oxide and zinc-plated finish options.
Frequently Asked Questions
What are the factors to consider when selecting the right shaft collar for my application?
- Choose between set screw, clamp style and other variations based on the application requirements.
- Select a material that offers the necessary strength, corrosion resistance and durability for the application.
- Opt for coatings or finishes that protect against wear, corrosion or friction.
- Ensure the collar's bore size matches the shaft diameter for proper fit and alignment.
- Look for collars that maintain concentricity to prevent wobbling or misalignment.
- Evaluate the collar's ability to securely hold the shaft under the expected loads and operating conditions.
- Consider factors such as temperature, moisture and exposure to chemicals or contaminants.
How do shaft mounting collars differ from clamp-style collars?
- Set screw collars use a recessed screw to secure onto the shaft material for holding power, which may cause marring on the shaft surface.
- Whereas, clamp-style collars employ compressive forces to lock onto the shaft without causing any damage.
- Clamp-style collars offer the advantages of easy removal, indefinite adjustability and compatibility with virtually any shaft without the risk of damage.
Popular Search Queries
Explore More
- KEYSHAFT
- CONTITECH INC
- FIRE RESEARCH FRC
- Stair Unit Accessories
- Spacer and Standoff Assortments
- Decontamination Showers
- Exterior Wood Stains and Sealers
- Hasp Locks
- VULCAN HART Roller Pin
- VERMONT GAGE Go Standard Thread Plug Gages, 1 1/8-12 Unf
- HUBBELL WIRING DEVICE-KELLEMS Support Grips, Double Eye, Single Weave, Split Mesh
- EXCELTA Tweezer Curved Fine
- WESTWARD High Speed Steel Spiral Point Tap, TiN Finish
- ANSELL 11-423 Hyflex Heat Resistant Industrial Gloves
- ANVIL AF730 Series Longitudinal And Lateral Seismic Clamps, Plain
- ANVIL AS520H Series Channel With Holes