PROTO J2125 Sleever Bar, Flat End Type, 30 Inch Length, 3/4 Inch Diameter

PROTO sleever bar J2125 is an alignment pry unit for positioning, prying and aligning bolt holes in construction, maintenance & repair applications.

Features:

• J2125 PROTO sleever bar has forged high carbon steel construction for complete resistance against industrial abuse, as well as providing strength & durability.
• It has an angled, flattened end that acts as a lever to apply a significant amount of force between the objects.
• This unit has a 3/4-inch diameter with a pencil point tip end and a chiselled end.
• It protects against structural instability by prying the holes into alignment.

Standards and Approvals:

• ASME

Frequently Asked Questions:

Q. What are the types of pry bars?

A.

• Alignment pry bar
• Claw pry bar
• Digging pry bar
• Flat pry bar
• Gooseneck pry bar
• Heavy-duty pry bar
• Moulding pry bar
• Rolling head pry bar

Q. What is the difference between a crowbar and a pry bar?

A. Pry bars are generally thinner and flatter than crowbars, making them ideal for intricate tasks.

Q. How to remove nails with a head?

A.

• Place the flat end of the straight side of the pry bar in a way that the fissure should be on either side of the head of the nail.
• Hammer the pry bar lightly so that it bites into the wood and gets under the nail head.
• Gently press downwards on the free end for lifting up the nail head.

Q. How to remove headless nails?

A.

• Keep a block of wood next to the nail to ensure leverage for the hammer.
• Position a pry bar or hammer around the nail.
• Clamp the locking pliers on the nail to prevent the slipping of pry bar or hammer.
• Pull back on the pry bar or hammer to remove the nail.