FREE delivery on orders over €150
OSG VGM7-0066 Square End Mill, Non-Center Cutting, 1/2 Inch Milling Dia, 1 1/2 Inch Length Of Cut
Item: CT6VMBModel: VGM7-0066Cross Ref: 61LK46
7 In Stock
Ships within 2 days via
10.00% off
€164.79 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Square End Mill |
| Chamfer Width | Not Applicable |
| Coolant Fed | Non Coolant Through |
| Corner Radius | Not Applicable |
| Cutting Length | 1 1/2" |
| Cutting Type | Non Center Cutting |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Style | Square |
| End Type | Single End |
| Finish | Exo |
| Flute Type | Helical |
| Grade | High Performance |
| Helix Angle | 36° |
| Material | Carbide |
| Material Grade - Machining | High Performance |
| Milling Dia. | 1/2" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Number Of Coolant Holes | 0 |
| Number Of Flutes | 7 |
| Overall Length | 4" |
| Primary Material Application | Cast Iron, Hardened Steel, Heat-Resistant Alloy, Stainless Steel, Steel |
| Secondary Material Application | Hardened Steel |
| Secondary Material Application Iso Code | H |
| Shank Dia. | 1/2" |
| Shank Type | Shrink Fit |
| System Of Measurement | Fractional Inch |
Shipping Info:
| Ship weight (kg) | 0.17 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Product Variants
| Product | Model | Milling Dia. | Shank Dia. | Finish | Overall Length | Number Of Flutes | Grade | Helix Angle | List Number | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
20226100 | 1" | 1" | Bright, Uncoated | 5" | 2 | High Performance | 30° | 2022 | €623.14 | |
 |
36210014 | 1/2" | 1/2" | WXL | 3 1/2" | 2 | Micro Grain Carbide | 30° | 3621 | €237.17 | |
|
20224900 | 1/2" | 1/2" | Bright, Uncoated | 3" | 2 | High Performance | 30° | 2022 | €121.83 | |
 |
20221700 | 1/4" | 1/4" | Bright, Uncoated | 2 1/2" | 2 | High Performance | - | 2022 | €56.39 | |
|
36210009 | 1/4" | 1/4" | WXL | 2 1/2" | 2 | Micro Grain Carbide | 30° | 3621 | €89.47 | |
 |
20220100 | 1/8" | 1/8" | Bright, Uncoated | 1 1/2" | 2 | High Performance | 30° | 2022 | €29.97 | |
|
36210007 | 0.188" | 0.188" | WXL | 2 1/4" | 2 | Micro Grain Carbide | 30° | 3621 | €67.01 |
Explore Products
- BRADY B30EP-167U-593-RD 118057 Precut Label Roll, Circle, 1 1/2 x 1 13/64 Inch, Polyester, Red, 200 Label per Roll
- KM SYSTEMS KM63TSS32LNER3 Groove/Cutoff
- MAIN FILTER INC. MF0714855 75D020BNHC Interchange Hydraulic Filter, Glass, 25 Micron, Viton Seal, 6.69 Inch Height
- GRAINGER 227-001022 Ball End Mill, 2 Flutes, 1/4 Inch Milling Dia, 4 Inch Overall Length
- ALLEGRO SAFETY 9871-01L Battery Clip
- EATON E22TB2X10B Pushbutton, 22.5 mm, Illuminated, Momentary, Red Actuator, 1Nc, 60 Vac/Dc Lamp Voltage
- GRAINGER FS-500SS GR 36.00 Strut Channel - Slotted, Steel, Painted, 14 ga Gauge, 3 ft Overall Length, Green
- SPEC C03000320690S Compression Spring, 13.6 lbs/In Stiffness Rate, 3.5 lbs Load Capacity, Stainless Steel
Explore More
- AMETEK LAMB
- BRADY
- KEYSHAFT
- MASTER APPLIANCE
- METALPRO
- Safety Glasses
- Pavement Markers and Pavement Marking Tape
- Mechanical Machining Shears
- Aluminum Foil Rolls
- Retaining Ring Applicator
- AKRO-MILS 30287 Akrobins Super Size Bins
- OIL SAFE ID Tabs
- MILLER ELECTRIC Metalworker Welding Gloves
- KRYTOX GPL 104 Series General Purpose Oil
- OMRON Miniature Snap Action Switches
- GROVE GEAR NH Series, BMQ-R Style, 818 Size, Ironman Narrow Housing Worm Gear Reducers
- REGAL Plug Hand Taps, 8 Pitch, HSS, TiN
- CONDOR Flammables Safety Cabinets
- PARKER 171CA Series Compress-Align Male Run Tees
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
OSG VGM7-0066 Square End Mill, Non-Center Cutting, 1/2 Inch Milling Dia, 1 1/2 Inch Length Of Cut
€183.09 /unit