FREE delivery on orders over €150
OSG VGM5-1108 Carbide End Mill, 5 Flutes, 1/2 Inch Milling Dia, 5/8 Inch Length Of Cut
Item: CT4UNAModel: VGM5-1108Cross Ref: 61LH75
7 In Stock
Ships within 2 days via
10.00% off
€183.33 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Carbide End Mill |
| Coolant Fed | Non Coolant Through |
| Corner Radius | 1/8" |
| Cutting Length | 5/8" |
| Cutting Type | Center Cutting |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Corner Radius |
| End Type | Single End |
| Finish | Titanium Aluminum Nitride Coat |
| Finish - Machining | TiAlN |
| For Material Hardness | 0 HRC to 45 HRC |
| Grade | High Performance |
| Helix Angle | 40° |
| List Number | VGM5-LN |
| Material | Carbide |
| Material - Machining | Carbide |
| Material Application | Cast Iron, Heat-Resistant Alloy, Stainless Steel, Steel |
| Material Grade - Machining | High Performance |
| Milling Dia. | 1/2" |
| Neck Dia. | 0.475" |
| Neck Length | 1/2" |
| Number Of Coolant Holes | 0 |
| Number Of Flutes | 5 |
| Overall Length | 4" |
| Primary Material Application | Steel, Cast Iron, Die Steel, Hardened Steel, Nickel, Stainless Steel, Titanium |
| Primary Material Application Iso Code | H, K, M, P, S |
| Secondary Material Application | Hardened Steels 35-45 HRC |
| Secondary Material Application Iso Code | H |
| Shank Dia. | 1/2" |
| Shank Type | Shrink Fit |
| Shank Type - Machining | Shrink Fit |
| Single End/double End | Single End |
| System Of Measurement | Fractional Inch |
Shipping Info:
| Ship weight (kg) | 0.17 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Product Variants
| Model | Milling Dia. | Shank Dia. | Grade | Corner Radius | Overall Length | Number Of Flutes | Helix Angle | List Number | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| VGM5-1193 | 1" | 1" | High Performance | 0.06" | 6" | 5 | 40° | VGM5-LN | €666.92 | |
| VGM5-1199 | 1" | 1" | High Performance | 0.03" | 6" | 5 | 40° | VGM5-LN | €717.52 | |
| VGM5-1206 | 1" | 1" | High Performance | 0.03" | 7" | 5 | 40° | VGM5-LN | €760.45 | |
| VGM5-1208 | 1" | 1" | High Performance | 0.09" | 7" | 5 | 40° | VGM5-LN | €760.45 | |
| VGM5-1204 | 1" | 1" | High Performance | 1/4" | 6" | 5 | 40° | VGM5-LN | €717.52 | |
| VGM5-1202 | 1" | 1" | High Performance | 3/25" | 6" | 5 | 40° | VGM5-LN | €717.52 | |
| VGM5-1211 | 1" | 1" | High Performance | 1/4" | 7" | 5 | 40° | - | €760.45 |
Explore Products
- APPROVED VENDOR U04160.025.0225 Hex Head Cap Screw, 1/4 In - 28 Thread Size, Steel, 2 1/4 In Lg., 5/32 In Head Ht., Gr. 8, Fine
- SPEC WWG1600034048S Disc Spring, Split Wave Springs, Stainless Steel, 0.032 Inch Thick, Plain
- TEADIT CGF1085.018.2.150 Full Face Cut Gasket, NA1085, 1/8 Inch Thickness, 2 Inch Size, 150# Class
- BALDOR / DODGE M6H39T132IEC MTA 6307,39:1,132 IEC Motorized Torque Arm
- BALDOR MOTOR D2030R SCR Drive DPG Motor, 240/150V DC, 1750 RPM, 30 hp, SC2512ATZ Frame
- PASS AND SEYMOUR 6307 Duplex Receptacle, Dust And Moisture Resistant, 20A, 125V, Gray
- FANTECH 47182 Disconnect Switch, NEMA-1, 3 Phase, 2 Pole
- MERIT BRASS 414B-3204 Hex Bushing, Size(a) 2 Inch, Size(b) 1/4 Inch
Explore More
- KEYSHAFT
- PHILLOCRAFT
- ROPER PUMPS
- DUCK
- HUBBELL - BRYANT
- Abrasive Wheel Adapters
- Carbon Monoxide and Smoke Detectors
- Electric Sanders
- Deadbolt Locks
- Turnout Gear Storage Racks
- HI TEMP Welding Blanket
- DESTACO 2007 Series Vertical Hold Down Clamps, U Bar
- LOC-LINE Anti-Static Hose Segments
- MUELLER INDUSTRIES 1602-D Chexter Check Valves
- GLOBE SCIENTIFIC Diamond Culture Tube Caps, for 25 mm Glass Culture Tubes
- DAYTON Square Open Legend Plates
- SMC VALVES Male Connector
- RACO Set Screw Connectors, Die-Cast Zinc
- NIBCO 607-LT Series 90 Deg Elbows, Long Radius C x C, Wrot
- PARKER Seal-Lok FLO Series Male Pipe Connectors, ORFS / NPTF
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
OSG VGM5-1108 Carbide End Mill, 5 Flutes, 1/2 Inch Milling Dia, 5/8 Inch Length Of Cut
€203.70 /unit