FREE delivery on orders over €150
OSG VGM5-0215 Carbide End Mill, 5 Flutes, 3/4 Inch Milling Dia., 1 1/8 Inch Length Of Cut
Item: CT4UUMModel: VGM5-0215Cross Ref: 61LG05
7 In Stock
0.19"
40°
1.5
1.125"
Ships within 2 days via
€316.89 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Carbide End Mill |
| Coolant Fed | Non Coolant Through |
| Corner Radius | 0.19" |
| Cutting Length | 1 1/8" |
| Cutting Type | Center Cutting |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Corner Radius |
| End Type | Single End |
| Finish | Titanium Aluminum Nitride Coating |
| Finish-machining | TiAlN |
| For Material Hardness | 0 HRC to 45 HRC |
| Grade | High Performance |
| Helix Angle | 40° |
| List Number | VGM5 |
| Material | Carbide |
| Material Application | Cast Iron, Heat-Resistant Alloy, Stainless Steel, Steel |
| Material Grade-machining | High Performance |
| Material-machining | Carbide |
| Milling Dia. | 3/4" |
| No. Of Coolant Holes | 0 |
| No. Of Flutes | 5 |
| Overall Length | 4" |
| Primary Material Application | Steel, Cast Iron, Die Steel, Hardened Steel, Nickel, Stainless Steel, Titanium |
| Primary Material Application Iso Code | H, K, M, P, S |
| Secondary Material Application | Hardened Steels 35-45 HRC |
| Secondary Material Application Iso Code | H |
| Shank Dia. | 3/4" |
| Shank Type | Shrink Fit |
| Shank Type-machining | Shrink Fit |
| Single End/double End | Single End |
| System Of Measurement | Imperial |
Shipping Info:
| Ship weight (kg) | 0.39 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 10.16 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Product Variants
| Model | Milling Dia. | Cutting Length | Shank Dia. | Primary Material Application Iso Code | Grade | Material Grade-machining | Shank Type-machining | Finish-machining | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| VGM5-1193 | 1" | 1 1/4" | 1" | H, K, M, P, S | High Performance | High Performance | Shrink Fit | TiAlN | €518.72 | |
| VGM5-1199 | 1" | 1 1/4" | 1" | H, K, M, P, S | High Performance | High Performance | Shrink Fit | TiAlN | €605.56 | |
| VGM5-1206 | 1" | 1 1/4" | 1" | H, K, M, P, S | High Performance | High Performance | Shrink Fit | TiAlN | €641.79 | |
| VGM5-1208 | 1" | 1 1/4" | 1" | H, K, M, P, S | High Performance | High Performance | Shrink Fit | TiAlN | €641.79 | |
| VGM5-1204 | 1" | 1 1/4" | 1" | H, K, M, P, S | High Performance | High Performance | Shrink Fit | TiAlN | €605.56 | |
| VGM5-1202 | 1" | 1 1/4" | 1" | H, K, M, P, S | High Performance | High Performance | Shrink Fit | TiAlN | €605.56 | |
| VGM5-1211 | 1" | 1 1/4" | 1" | H, K, M, P, S | High Performance | High Performance | - | - | €645.52 |
Explore Products
- MARSH J4646 Pressure Gauge, 60 PSI to 0 kPa / Hg to 60 PSI, 2 1/2 in Dial, 1/4 in NPT Male, Bottom, Copper
- FLUX 10-42461224 Inner Tube Assembly, 39 Inch Size
- SMC VALVES SS5Y5-10S0-12B-C8 Manifold
- 3M 3M 1318-1 0.875 X 72YD-BLACK Electrical Tape, Black, 7/80 Inch x 72yd
- SMC VALVES MGPZ32-AZQ08-50 Guided Cylinder
- APPROVED VENDOR M01210.080.0035 Hex Head Cap Screw, M8x1.25 Thread Size, Steel, 35mm Lg., 5.3mm Head Ht., Rockwell C22 Hardness, Coarse
- GRAINGER LBL-SS7157 Pin, 1/2 In Pin Dia., 4 1/2 In Shank Lg.
- PRIME LINE mp1225 Handle/Actuator, Sliding Dr Mortise, Wht
Explore More
- FENIX LIGHTING
- KEYSHAFT
- ROAD POWER
- SLOAN
- SNAP-TITE
- Trash Can Tops
- LED Display/Cove Lighting
- Hand Scrapers
- Dock Seals
- Key Locks
- REVCOR Propeller, 14 inch
- DWYER INSTRUMENTS 651 Series Temperature Transmitters
- ANSELL 58-330 Alphatec Aquadri Gloves
- LUMAPRO Electronic Ballasts
- BURNDY GIE-G Type Ground Connectors
- AUTOQUIP 35 Series Double Long Scissor Lift Table
- VERMONT GAGE NoGo Standard Thread Plug Gages, 1 3/16-16 Un
- VERMONT GAGE Go Standard Thread Plug Gages, 1 3/8-12 Unf
- APPROVED VENDOR 7/16"-14 Coarse Zinc Plated Grade 5 Steel Flat Square Neck Plow Bolts
- VESTIL CA-KP Series Heavy Duty King Pin Carousels
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
OSG VGM5-0215 Carbide End Mill, 5 Flutes, 3/4 Inch Milling Dia., 1 1/8 Inch Length Of Cut
€316.89 /unit