FREE delivery on orders over €150
OSG VGM5-0050 Carbide End Mill, 5 Flutes, 1/4 Inch Milling Dia, 3/8 Inch Length Of Cut
Item: CT4UQJModel: VGM5-0050Cross Ref: 61LE38
7 In Stock
Ships within 2 days via
10.00% off
€46.77 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Carbide End Mill |
| Coolant Fed | Non Coolant Through |
| Corner Radius | 0.06" |
| Cutting Length | 3/8" |
| Cutting Type | Center Cutting |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Corner Radius |
| End Type | Single End |
| Finish | Titanium Aluminum Nitride Coat |
| Finish - Machining | TiAlN |
| For Material Hardness | 0 HRC to 45 HRC |
| Grade | High Performance |
| Helix Angle | 40° |
| List Number | VGM5 |
| Material | Carbide |
| Material - Machining | Carbide |
| Material Application | Cast Iron, Hardened Steel, Heat-Resistant Alloys, Stainless Steel, Steel |
| Material Grade - Machining | High Performance |
| Milling Dia. | 1/4" |
| Number Of Coolant Holes | 0 |
| Number Of Flutes | 5 |
| Overall Length | 2" |
| Primary Material Application | Cast Iron, Hardened Steel, Inconel, Stainless Steel, Steel, Titanium, Tool And Die Steel |
| Primary Material Application Iso Code | H, K, M, P, S |
| Secondary Material Application | Hardened Steels 35-45 HRC |
| Secondary Material Application Iso Code | H |
| Shank Dia. | 1/4" |
| Shank Type | Shrink Fit |
| Shank Type - Machining | Shrink Fit |
| Single End/double End | Single End |
| System Of Measurement | Fractional Inch |
Shipping Info:
| Ship weight (kg) | 0.02 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Product Variants
| Model | Milling Dia. | Shank Dia. | Grade | Corner Radius | Overall Length | Number Of Flutes | Helix Angle | List Number | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| VGM5-1193 | 1" | 1" | High Performance | 0.06" | 6" | 5 | 40° | VGM5-LN | €666.92 | |
| VGM5-1199 | 1" | 1" | High Performance | 0.03" | 6" | 5 | 40° | VGM5-LN | €717.52 | |
| VGM5-1206 | 1" | 1" | High Performance | 0.03" | 7" | 5 | 40° | VGM5-LN | €760.45 | |
| VGM5-1208 | 1" | 1" | High Performance | 0.09" | 7" | 5 | 40° | VGM5-LN | €760.45 | |
| VGM5-1204 | 1" | 1" | High Performance | 1/4" | 6" | 5 | 40° | VGM5-LN | €717.52 | |
| VGM5-1202 | 1" | 1" | High Performance | 3/25" | 6" | 5 | 40° | VGM5-LN | €717.52 | |
| VGM5-1211 | 1" | 1" | High Performance | 1/4" | 7" | 5 | 40° | - | €760.45 |
Explore Products
- EATON EGB7040FFGV Molded Case Circuit Breaker, 4-Pole, 40A, 600Y/347 Vac, Line And Load, 50/60 Hz
- APOLLO VALVES 511JHBKKAA0015 Safety Relief Valve with Brass Trim, Screwed Cap, PCTFE Seat, Default Setting, 15 Psig, 2 x 3 Inch Size, MNPT x FNPT
- KUNKLE 911BDEM03ALE Safety Relief Valve, Male X Female NPT, D Orifice, 1 Inch Inlet Size
- ADAPT-ALL SS5007S-12-08 Straight Adapter, Male S12 DIN Tube x Male 0.5 NPT, Stainless Steel, Light Duty
- BRADY 23527 Numbered Tag, Brass, 1 1/2 Inch Dia, Chilled Water, 276-300, Brass, 0.04 Inch Thick, Round
- EATON XTAE015B10N2P4 Non-Reversing Electronic Motor Starter, 15 A, 400 V 50 Hz, 1No, B Frame, 45 mm, 1.6-2.4 A
- ANVIL 0500011879 10 X 5 Tb Pipe Stanchion
- VERMONT GAGE 141196230 Plug Gage, Class X, Go, Steel, 0.9623 Inch Size
Explore More
- KEYSHAFT
- VIPER
- SHARP
- FLOTEC
- SOLIDDRIVE
- Straight Wall Containers
- Mallets Dead Blow Hammers
- Flange Alignment Tools
- PTFE Tubing
- Tubing Racks
- DESTACO 8100/8300 Series Pneumatic Swing Clamps
- COLDER PRODUCTS COMPANY PLC Series Coupling Inserts, Acetal
- CHICAGO PNEUMATIC Positive Clutch & Direct Drive Screwdrivers
- ACME ELECTRIC WI045 Series Medium Voltage Transformers, 3 Phase, 60Hz, 2.5kV & 5kV Class
- MUELLER INDUSTRIES 109MDT Silent Check Valves
- BRADY Right-To-Know Centers
- PARLEC Stub Arbor Style Taper Shank
- HEATHROW SCIENTIFIC Weighing Boats and Dishes
- STEINER INDUSTRIES Weldlite Cape sleeves, Flame Retardant
- ADAPT-ALL 169 Series Elbows
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
OSG VGM5-0050 Carbide End Mill, 5 Flutes, 1/4 Inch Milling Dia, 3/8 Inch Length Of Cut
€51.97 /unit