FREE delivery on orders over €150
OSG 36100311 Ball End Mill, 2 Flutes, 3/32 Inch Milling Dia., 3/32 Inch Lg of Cut, 30 Deg. Helix Angle, WXL
Item: CT4RNKModel: 36100311Cross Ref: 35AK22
7 In Stock
0.09375"
0.25"
Ships within 2 days via
€73.59 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Ball End Mill |
| Cast Iron (k) Compatibility | Yes |
| Chip Breaker | No |
| Coolant Fed | Non Coolant Through |
| Cutting Direction | Right Hand |
| Cutting Length | 0.094" |
| Cutting Type | Center Cutting |
| Dimensions Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing, Roughing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Ball Nose |
| End Type | Single End |
| Finish | WXL |
| Finish-machining | WXL |
| Grade | General Purpose |
| Hardened Compatibility | No |
| Length Of Cut | 3/32" |
| List Number | 3610 |
| Material | Carbide |
| Material Grade-machining | General Purpose |
| Material-machining | Carbide |
| Measurement System | Fractional Inch |
| Milling Dia. | 3/32" |
| Neck Length | Not Applicable |
| No. Of Flutes | 2 |
| Non Ferrous (n) Compatibility | No |
| Overall Length | 2 1/2" |
| Primary Material Application | Cast Iron, Hardened Steel, Steel, Tool And Die Steel |
| Primary Material Application Iso Code | H, K, P |
| Shank Dia. | 1/4" |
| Shank Type | Straight |
| Shank Type-machining | Straight |
| Single End/double End | Single End |
| Stainless Compatibility | Yes |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | No |
| System Of Measurement | Imperial |
Shipping Info:
| Ship weight (kg) | 0.05 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 6.35 |
| Ship width (cm) | 2.54 |
| Country of Origin | JP |
Product Variants
| Product | Model | Overall Length | Shank Dia. | Grade | Helix Angle | Milling Dia. | List Number | Length Of Cut | End Mill Application | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
3110105 | 45 mm | 4 mm | General Purpose | 30° | 0.1 mm | 3790 | - | Finishing, Roughing | €187.90 | |
|
3110103 | 45 mm | 4 mm | General Purpose | 30° | 0.1 mm | 3790 | - | Finishing, Roughing | €173.16 | |
 |
3105010 | 40 mm | 4 mm | General Purpose | 30° | 0.1 mm | 3710 | - | Finishing, Roughing | €104.94 | |
 |
3050205 | 45 mm | 4 mm | General Purpose | 30° | 0.2 mm | 4590 | - | Finishing, Roughing | €271.59 | |
|
3049923 | 45 mm | 4 mm | General Purpose | 30° | - | 4590 | - | Finishing, Roughing | €229.89 | |
|
3110217 | 45 mm | 4 mm | General Purpose | 30° | 0.2 mm | 3790 | - | Finishing, Roughing | €163.93 | |
 |
3170012 | 45 mm | 4 mm | General Purpose | 30° | 0.2 mm | 3712 | - | Finishing, Roughing | €218.46 |
Explore Products
- ERICKSON NP301 Locknut/Stopscrew
- REGAL 007540AS43 Drill and Tap, 1/2-13 Size, 2 Flutes with Steam Oxide
- GRAINGER 400K71 Debris-Resistant Standard Plate Caster, 5 Inch Dia, Swivel Caster
- CHICAGO-LATROBE 46140 Jobber Length Drill Bit, #70 Size, 3/8 Inch Flute Length, 1-1/4 Inch Length
- WALTER TOOLS DNGA150608T02020 WCK10 7349624 Diamond Turning Insert, DNGA, 442 Insert Size
- HUBBELL PREMISE WIRING FCLC900K50GM12 Fiber Connector 50 UM LC
- CLE-LINE C18915 Jobber Length Drill Bit, 2.5 mm Drill Size, 57 mm Overall Length, 135 deg Split Point, Straw Oxide
Explore More
- KEYSHAFT
- Hammer Drive Pin Anchors
- Flange Alignment Tools
- Concrete Anchors
- Fuse Clips
- Stick Electrodes
- EMBRACO Refrigeration Compressors
- OIL SAFE Frame Mount Suction Hose Racks
- CONDOR Knit Gloves, Full Finger, Full Dotted, 7 Gauge, Orange
- TEMPCO Gemini Series Twin Bore IR Heaters
- ACME ELECTRIC Three Phase Dry Type Distribution Transformers, 600V Delta Primary Volts, 208Y/120 Tap Secondary Volts
- PASS AND SEYMOUR Plugtail Series Spec Grade Plug Load Controllable Receptacles
- VESTIL RLAD Series Portable Two-Step Ladders
- EATON Class H Fuse Holders
- EATON Navy And Marine Complete Molded Case Circuit Breakers
- HUBBELL-WIEGMANN Back Panel
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
OSG 36100311 Ball End Mill, 2 Flutes, 3/32 Inch Milling Dia., 3/32 Inch Lg of Cut, 30 Deg. Helix Angle, WXL
€73.59 /unit