FREE delivery on orders over €150
OSG 3182058 Square End Mill, Center Cutting, 2 Flutes, 5.80 mm Milling Dia, 11.60 mm Length Of Cut
Item: CT6WMTModel: 3182058Cross Ref: 35AT48
7 In Stock
0.228"
0.236"
Ships within 2 days via
10.00% off
€118.85 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Square End Mill |
| Cast Iron (k) Compatibility | Yes |
| Cutting Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Cutting Length | 11.6 mm |
| Cutting Type | Center Cutting |
| Dimension Type | Metric |
| Drilling Tool Configuration | Individual |
| End Mill Application | Roughing/Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Square |
| End Type | Single End |
| Finish | WXL |
| Grade | General Purpose |
| Hardened Compatibility | No |
| Helix Angle | 30° |
| List Number | 3721 |
| Material | Carbide |
| Material Grade - Machining | General Purpose |
| Milling Dia. | 5.8 mm |
| Non Ferrous (n) Compatibility | No |
| Number Of Flutes | 2 |
| Overall Length | 50 mm |
| Primary Material Application | Cast Iron, Hardened Steel, Stainless Steel, Steel, Tool And Die Steel |
| Primary Material Application Iso Code | H, K, M, P |
| Secondary Material Application | Aluminum, Nickel, Titanium |
| Secondary Material Application Iso Code | N, S |
| Shank Dia. | 6 mm |
| Shank Type | Straight |
| Single End/double End | Single End |
| Stainless (m) Compatibility | Yes |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | No |
| System Of Measurement | Metric |
Shipping Info:
| Ship weight (kg) | 0.05 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Product Variants
| Product | Model | Shank Dia. | Overall Length | End Type | Milling Dia. | Grade | List Number | Helix Angle | End Mill Cutting Type | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
84400623 | 1/4" | 2 1/2" | Double End | 0.188" | - | 8440 | 43° | Center Cutting | €109.26 | |
 |
20224500 | 1/2" | 3" | Single End | 0.469" | General Purpose | 2022 | 30° | Center Cutting | €126.16 | |
 |
20231700 | 1" | 5" | Single End | 1" | General Purpose | 2023 | 30° | Center Cutting | €643.11 | |
 |
20241700 | 1" | 6" | Single End | 1" | General Purpose | 2024 | 30° | Center Cutting | €675.28 | |
 |
HP410-0394 | 6 mm | 60 mm | Single End | 1 mm | General Purpose | HP410 | 30° | Center Cutting | €50.22 | |
 |
8502010 | 4 mm | 40 mm | Single End | 1 mm | General Purpose | 8120 | 30° | Center Cutting | €74.94 | |
|
HP410-0551 | 6 mm | 60 mm | Single End | 1.4 mm | General Purpose | HP410 | 30° | Center Cutting | €58.54 |
Explore Products
- BRADY PS-187-2-WT-S-4 104662 Precut Label Roll, 3/16 x 1/2 Inch, Polyolefin, White, For 8 AWG to 12 AWG Wire Gauge
- TRIDON 300110150 Hose Clamp Minimum Diameter 1-1/2 Sae
- CHAMPION TOOL STORAGE E15000802ILCFTB-DG Cabinet, 47 x 35-7/8 x 28-1/2 Inch Size, 8 Drawers, 264 Compartment, Dark Gray
- EATON SHUNT BRD 48VDC Shunt Board Assembly Kit, 48 Vdc
- MAIN FILTER INC. MF0593135 937786Q Interchange Hydraulic Filter, Glass, 10 Micron, Buna Seal, 5.9 Inch Height
- BALDOR / DODGE 031345 D-Series Clutch & Brake, Shaft Att. Finished Bore
- PEER CHAIN 464 Offset Link
- THOMAS & BETTS 5250GR Liquid Tight Connector, 4 Inch
Explore More
- BERNZOMATIC
- JAMCO
- KEYSHAFT
- TRIM LOK INC
- AO SMITH WATER HEATER
- Rubber Edge Trim Seals
- Solar Fuses
- Trailer Accessories
- Strut Channel
- Stretch Wrap Machine Accessories
- CONDOR Electrical Gloves Protector, Beige/Orange/Green
- RINGERS GLOVES Extrication Increased Visibility Impact Gloves
- MCR SAFETY NXG Work Gloves, Black
- HEIN WERNER Hydraulic Presses
- LEATHERHEAD TOOLS S.E.T. Ultra Force Breacher Bars
- TELEMECANIQUE SENSORS Solid State Relay SPST Photoelectric Sensor
- APPROVED VENDOR Heat Activated Shrink Film
- DIVERSITECH A/c Mounting Bracket
- PETERSEN PRODUCTS 311 Series Pressure Temperature Test Kit
- GUARDAIR Safety Air Guns
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
OSG 3182058 Square End Mill, Center Cutting, 2 Flutes, 5.80 mm Milling Dia, 11.60 mm Length Of Cut
€132.06 /unit