FREE delivery on orders over €150
OSG 3095553 Ball End Mill, 3 Flutes, 5 mm Milling Dia., 7.5 mm Lg Of Cut, 61.80 mm Neck Lg, WXS
Item: CT4TFUModel: 3095553Cross Ref: 34ZV20
7 In Stock
5 mm
7.64 mm
8 mm
Ships within 2 days via
€459.39 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Ball End Mill |
| Cast Iron (k) Compatibility | Yes |
| Chip Breaker | No |
| Coolant Fed | Non Coolant Through |
| Cutting Direction | Right Hand |
| Cutting Length | 7.5 mm |
| Cutting Type | Center Cutting |
| Dimensions Type | Metric |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing, Roughing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Ball Nose |
| End Type | Single End |
| Finish | WXS |
| Finish-machining | WXS |
| Grade | General Purpose |
| Hardened Compatibility | Yes |
| Helix Angle | 45° |
| List Number | 9581 |
| Material | Carbide |
| Material Grade-machining | General Purpose |
| Material-machining | Carbide |
| Milling Dia. | 5 mm |
| Neck Length | 61.8 mm |
| No. Of Flutes | 3 |
| Non Ferrous (n) Compatibility | No |
| Overall Length | 130 mm |
| Primary Material Application | Cast Iron, Hardened Steel, Steel, Tool And Die Steel |
| Primary Material Application Iso Code | H, K, P |
| Shank Dia. | 8 mm |
| Shank Type | Straight |
| Shank Type-machining | Straight |
| Single End/double End | Single End |
| Stainless Compatibility | Yes |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | No |
| System Of Measurement | Metric |
Shipping Info:
| Ship weight (kg) | 0.09 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 13 |
| Ship width (cm) | 2.54 |
| Country of Origin | JP |
Product Variants
| Product | Model | Primary Material Application Iso Code | Milling Dia. | Shank Dia. | Neck Length | Shank Type-machining | Finish-machining | Cutting Length | Neck Dia. | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
497-1000 | H, K, P | 1" | 1" | Not Applicable | Straight | Bright (Uncoated) | 1 1/2" | - | €883.44 | |
 |
HP416-5000 | K, M, P, S | 1/2" | 1/2" | Not Applicable | Straight | TiAlN | 1" | - | €160.64 | |
 |
36100911 | H, K, P | 1/2" | 1/2" | Not Applicable | Straight | WXL | 1/2" | - | €230.46 | |
 |
44101611 | H, K, P | 1/2" | 1/2" | 1" | Straight | WXS | 1/2" | 31/64" | €328.54 | |
|
497-5000 | H, K, P | 1/2" | 1/2" | Not Applicable | Straight | Bright (Uncoated) | 3/4" | - | €226.01 | |
 |
90110511 | H, K, P | 1/4" | 1/4" | Not Applicable | Straight | WXS | 3/8" | - | €258.19 | |
 |
36901711 | H, K, P | - | 1/4" | 1 1/4" | Straight | WXL | 1/4" | - | €145.94 |
Explore Products
- NOTRAX 509S0046BL Antifatigue Mat, 6 x 4 Feet Size
- DAYTON 3VE53 Oil Fired Torpedo Heater, 400000 BtuH
- BRADY BM-20-422 Label, 1 x 2 Inch, 2 Inch, Polyester, White, 1000 Label Included
- EATON JGS316032G Molded Case Circuit Breaker, Electronic Lsi Trip, 3-Pole, 160A, Line/Load
- APPROVED VENDOR U22551.100.0725 Fully Threaded Stud, 1 In - 8 Thread Size, Steel, 7 1/4 In Lg., Gr. B16, Blk Oxide
- REGAL 090466RM Carbide End Mill, 1/4 Inch Dia., 2-1/2 Inch Length, 5 Flutes, Bright
- SMC VALVES CDA2F63-250-M9PZ Tie Rod Cylinder, 63 mm Size, Double Acting Auto Switcher
Explore More
- KEYSHAFT
- PAPR
- Laboratory Heating Mantles
- Gear Ties
- Demolition Hammer Accessories
- Microscope Cameras
- HELICOIL Spiral Point Plug Taps, UNF, 3B
- CONDOR Cowhide Leather Green/Gray Palm Gloves
- OBERON TCG Arc Flash Kits, 65 Cal Arc Rating
- CAMLOCK FITTINGS Type D Female Cam And Groove Coupler, Female NPT Thread
- GLOBE SCIENTIFIC Diamond PureFlow Solution Bottles
- APPROVED VENDOR Piston Seal
- HEATHROW SCIENTIFIC Slide
- APPLETON ELECTRIC Pilot Light 48V
- WEG ODP Three Phase Jp Footless, Vertical Fire Pump Motors
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
OSG 3095553 Ball End Mill, 3 Flutes, 5 mm Milling Dia., 7.5 mm Lg Of Cut, 61.80 mm Neck Lg, WXS
€459.39 /unit