FREE delivery on orders over €150
OSG 3090206 Ball End Mill, 3 Flutes, 3 mm Milling Dia, 4.5 mm Length Of Cut
Item: CT4TEAModel: 3090206Cross Ref: 34ZU17
7 In Stock
Ships within 2 days via
10.00% off
€190.05 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Ball End Mill |
| Cast Iron (k) Compatibility | Yes |
| Chip-breaker | No |
| Coolant Fed | Non Coolant Through |
| Cutting Direction | Right Hand |
| Cutting Length | 4.5 mm |
| Cutting Type | Center Cutting |
| Dimension Type | Metric |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing, Roughing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Ball Nose |
| End Type | Single End |
| Finish | Exo |
| Finish - Machining | EXO |
| Grade | General Purpose |
| Hardened Compatibility | Yes |
| Helix Angle | 45° |
| List Number | 9510 |
| Material | Carbide |
| Material - Machining | Carbide |
| Material Grade - Machining | General Purpose |
| Milling Dia. | 3 mm |
| Neck Length | Not Applicable |
| Non Ferrous (n) Compatibility | No |
| Number Of Flutes | 3 |
| Overall Length | 70 mm |
| Primary Material Application | Cast Iron, Hardened Steel, Steel, Tool And Die Steel |
| Primary Material Application Iso Code | H, K, P |
| Shank Dia. | 6 mm |
| Shank Type | Straight |
| Shank Type - Machining | Straight |
| Single End/double End | Single End |
| Stainless (m) Compatibility | Yes |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | No |
| System Of Measurement | Metric |
Shipping Info:
| Ship weight (kg) | 0.05 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Product Variants
| Product | Model | Overall Length | Shank Dia. | Grade | Number Of Flutes | Helix Angle | Milling Dia. | List Number | Length Of Cut | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
3110105 | 45 mm | 4 mm | General Purpose | 2 | 30° | 0.1 mm | 3790 | - | €268.43 | |
|
3110103 | 45 mm | 4 mm | General Purpose | 2 | 30° | 0.1 mm | 3790 | - | €247.37 | |
 |
3105010 | 40 mm | 4 mm | General Purpose | 2 | 30° | 0.1 mm | 3710 | - | €149.92 | |
 |
3050205 | 45 mm | 4 mm | General Purpose | 2 | 30° | 0.2 mm | 4590 | - | €271.59 | |
|
3049923 | 45 mm | 4 mm | General Purpose | 2 | 30° | - | 4590 | - | €229.89 | |
|
3110217 | 45 mm | 4 mm | General Purpose | 2 | 30° | 0.2 mm | 3790 | - | €234.19 | |
 |
3170012 | 45 mm | 4 mm | General Purpose | 2 | 30° | 0.2 mm | 3712 | - | €218.46 |
Explore Products
- APPROVED VENDOR P208FM Drill Bushing Type P Drill Size 4.55mm
- SPEC C01200200310S Compression Spring, 29 lbs/In Stiffness Rate, 2.1 lbs Load Capacity, Stainless Steel
- EATON SVX150A1-4A1N1B4B5CA Adjustable Frequency Drive, 150HP, 3 RO, Johnson Control N2, No Brake Chopper, FR9
- JOMAR VALVE 100-209XLC JP-100 XLC Brass Ball Valve, Full Port, Press XLC Connection, 200 WOG, 2-1/2 Inch Size
- HUBBELL WIRING DEVICE-KELLEMS HBL7843D Manual Motor Switch, 3 Pole, 40 A, 600 V
- KIPP K0122.00427X50 Adjustable Handle, Teardrop, Zinc, M4 Thread Size, 50 mm Stud Length
- EATON MPL7002FFS Frost Free Valve Mounting Plate
- TITAN FASTENERS JJF06032
Explore More
- KEYSHAFT
- TJERNLUND
- ZURN
- DELFIELD
- UNISAN
- Torch and Torch Kits
- Power Miter Saw Accessories
- Safety Banners and Posters
- Fuse Pullers
- Tower Light Mounts and Bases
- CONDOR Cowhide Leather Palomino Driver Gloves
- DESTACO 334-M Series Pull Action Latch Clamps
- VIEGA PROPRESS XL-C Adapter Flange, Copper, Press x Flange
- VIBCO VS Series Silent Pneumatic Turbine Vibrators
- ANVIL 026G Series Light Duty Two-Hole Pipe Straps
- DURHAM MANUFACTURING Stock Carts, Push Handle
- EATON E2J Type Mining Molded Case Circuit Breaker Trip Units
- NTN Bearing End Caps
- GRAINGER PVC Chemical Resistant Rods
- HADCO LEDs
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
OSG 3090206 Ball End Mill, 3 Flutes, 3 mm Milling Dia, 4.5 mm Length Of Cut
€211.17 /unit