Product Specifications:
| Centering Depth/chamfer Dimension (a3) | 2.5 mm |
| Distance Between Front Side And Bearing Centre (s) | 22 mm |
| Dynamic Load (c) | 53 kN |
| Grease Fitting (g) | M6 x 1 |
| Housing Length, Width Or Dia. (h) | 130 mm |
| Housing Width | 38 mm |
| Inner Ring Width B | 57 mm |
| Max. Operating Temp. | 100° |
| Min. Operating Temp. | -20° |
| Recommended Set Screw Tightening Torque | 22 N-m |
| Shaft Dia. | 45 mm |
| Static Load Rating (c0) | 31.8 kN |
Explore Products
- MARTIN SPROCKET W10Q Worm, 10 Diametral Pitch, 1.250 Inch Pitch Dia., Bore To Size, Steel
- PARKER 07B36B13A2BDG
- SMC VALVES nvz522-3dz-01t SMC NVZ522-3DZ-01T
- SMC VALVES vk334v-6g SMC VK334V-6G
- APOLLO VALVES 82105A8 Ball Valve, 1 Inch Size, 3 Pieces, Bronze, Oxygen Cleaned
- MAIN FILTER INC. MF0586157 HHC03612 Interchange Hydraulic Filter, Cellulose, 10 Micron Rating, Viton Seal, 8.32 Inch Height
- SMC VALVES CDM2B32P-150 Round Body Cylinder, 32Mm Bore Size, 150 Mm Stroke Length
- SMC VALVES CM2D20-100KZ Round Body Cylinder, 20Mm Bore Size, 100 Mm Stroke Length
Explore More
- KEYSHAFT
- RON CRANE SCALES
- BETA TOOLS
- EASTERN METAL SIGNS AND SAFETY
- TITAN
- Plates and Plate Covers
- Speciality Fuses
- Air Hose Accessories
- Connector Tools
- Built-in Locker Locks
- REVCOR Propeller, 10 inch
- MECHANIX M-Pact Multicam Tactical Impact Resistant Gloves
- IRONCLAD Wrenchworx Oil Resistant Gloves
- JOHN GUEST Swivel Male Run Tees, NPTF Thread, Acetal Gray
- MUELLER INDUSTRIES 862SS Y Strainers
- CABOT Exterior Stain, Toned Flat Finish
- APPROVED VENDOR 1/16" Pin Dia. Grade 18-8 Stainless Steel Mil Spec Undersized Dowel Pins
- REGAL Super Tuf-V Cobalt End Mills, Single End, HSS, CC, 5 Flutes, TiALN
- GATES CM2T Wire Braid Hoses
- USA SEALING Couplings
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
NTN ucc309