NTN nj208eat2xc3
Request a Quote
Payment
Delivery
Product Specifications:
| Bearing Inner Ring Width (b) | 18 mm |
| Dynamic Load (c) | 66 kN |
| External Dia. (d) | 80 mm |
| Fatigue Limit Load (cu) | 6.75 kN |
| Grease Lubrication Limit Speed (n Lim) | 8500 turns/min. |
| Internal Dia. (d) | 40 mm |
| Ir Flange Outside Dia. (d1) | 53.9 mm |
| Max. Fillet Radius (r1a) | 1 mm |
| Max. Fillet Radius (ra) | 1 mm |
| Max. Operating Temp. | 120° |
| Max. Shoulder Or Dia. (da) | 73.5 mm |
| Min. Fillet Radius (rns) | 1.1 mm |
| Min. Fillet Radius (rs) | 1.1 mm |
| Min. Inside Ring Dia. (dc) | 52 mm |
| Min. Operating Temp. | -20° |
| Min. Shoulder Dia. Ir (da) | 46.5 mm |
| Min. Small Face Shoulder Dia. (db) | 72.5 mm |
| Oil Lubrication Limit Speed (n) | 12000 turns/min. |
| Radial Clearance Class | C3 |
| Static Load Rating (c0) | 55.5 kN |
| Under Roller Dia. (f) | 49.5 mm |
| Upper Roller Dia. (e) | 71.5 mm |
Explore Products
- EATON CB2533T120480KGRAX7 Pringle Bolted Pressure Contact Switch, 2500A, 2No-2Nc, 120V, 480V, 3-Pole, Three-Wire
- INTERNAL TOOL 78-1427-C Carbide Head Key Cutter, Steel Shank, 1.25 Inch Dia, 0.1560 Inch Width, 14 Flute, Altin Coated
- SPEEDAIRE 4ZM22 Air Regulator 1/2 Inch Npt 220 Cfm 300 Psi
- RON-VIK RV000103 Inline Strainer, Low Profile, 1/4 Inch FNPT, Black Poly Top and Bowl, 80 Mesh SS
- WILLIAMS INDUSTRIAL TOOLS issxm613 Socket Flextension 1/2 Inch Drive x 13mm, 6.57 Inch Length, Black Industrial
- OSG 484-375208 Square End Mill, Center Cutting, 4 Flutes, 3/8 Inch Milling Dia., 1 1/2 Inch Length Of Cut
- BELIMO B217+LF24-MFT Actuator, Spring Return, 3/4 Inch NPT, 2 Way
- SMC VALVES JXCP18-LEHZ10LK2-4 Controller
Explore More
- FSI
- KEYSHAFT
- INTERNATIONAL ENVIROMENTAL
- FREUD
- MILES LUBRICANTS
- Service Jacks
- Relay Accessories
- Tool Bits
- Boiler Drain Valves
- Porting Tools Counterbores
- AKRO-MILS 33105 Akro Grid Dividable Plastic Storage Boxes
- ANSELL 88-356 Alphatec Blue Unlined Food Processing And Chemical Gloves
- SALISBURY Class 1 Electrical Insulating Rubber Gloves, 14 Inch, Black, Red Inside
- MAYHEW TOOLS Brass Sets
- ANVIL 367 Series Concentric Reducers, Black, Cast Iron
- HOFFMAN Type 4X Continous Hinge Screw Cover Enclosures
- ALLPAX GASKET CUTTER SYSTEMS 4000 Series Medium Duty Gasket Cutter Kits
- MAXCORE Ferrules
- SPEC Metric Compression Springs, Stainless Steel, 4.32 mm Outside Dia.
- PBC LINEAR Ceramic Coated Aluminum Linear Shafting, Imperial
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
NTN nj208eat2xc3