Product Specifications:
| Bearing Inner Ring Width (b) | 45 mm |
| Coefficient (f0) | 15.1 |
| Dynamic Load (c) | 195 kN |
| External Dia. (d) | 270 mm |
| Fatigue Limit Load (cu) | 9.05 kN |
| Grease Lubrication Limit Speed (n Lim) | 2300 turns/min. |
| Internal Dia. (d) | 150 mm |
| Max. Operating Temp. | 120° |
| Max. Shaft & Housing Fillet Radius (ra) | 2.5 mm |
| Max. Shoulder Or Dia. (da) | 257 mm |
| Min. Fillet Radius (rs) | 3 mm |
| Min. Operating Temp. | -40° |
| Min. Shoulder Dia. Ir (da) | 163 mm |
| Oil Lubrication Limit Speed (n) | 2700 turns/min. |
| Radial Clearance Class | C4 |
| Static Load Rating (c0) | 168 kN |
Explore Products
- SCHNEIDER ELECTRIC LC2D65AEHE Iec Magnetic Contactor, 48 To 130 VAC/Dc Coil Volts, 1No/1Nc
- SMITH-BLAIR 22600132015000 Repair Clamp Full Circle Stainless Steel 12 In
- BALDOR / DODGE VD30Q15L14 TIGEAR-2 Reducer With Base
- J.W. WINCO 631-25-9.4 JW Winco GN631-25-9.4 Thrust Pad
- MARTOR 355020 Utility Blade, 2 Cutting Sides, 1 1/2 Inch Length, 1 Inch Wd, Steel, 147T39
- SENSOREX TDS500/G Conductivity Solution, 500 ppm/731uS, 1 Gal
- MORSE CUTTING TOOLS 84736 MX1084736 Straight Flute Tap, M18 Size, 1.5 mm Pitch, 4 Flute, D6 Taper Straight
- STARRETT T436.1XRL-1 W/SLC 67998 Outside Micrometer, 0-1 Inch Range
Explore More
- BAND-IT
- KEYSHAFT
- WHIRLPOOL
- RHEEM
- STACKBIN
- Pool and Spa Pump Motors
- Marking Chalk and Refills
- Conduit Voltage Markers
- T-Bolts
- Impeller Pumps
- TURTLESKIN CP-430 Insider Gloves
- MEMPHIS GLOVE Ninja BNF Work Gloves, 15 Gauge, Fully Coated
- MEMPHIS GLOVE Ninja X Bipolymer Coated Gloves
- CAIMAN Unlined Lean-On Patch TIG Welding Gloves
- ANSELL 11-537 Hyflex Ultralight Cut Resistant Industrial Safety Gloves
- EGA PRODUCTS Side Step Dock Ladder
- TURNSTILE Hi Gate Controlled Exit 2 Way
- AKRO-MILS 35195 Nest And Stack Totes
- MJ MAY Roll Stock, 1 Feet X 2 Inch
- DAYTON Platforms
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
NTN 6230c4