FREE delivery on orders over €150
MICRO 100 MMBM-006-5X Ball End Mill, 0.6 mm Cutter Dia, 2 Flute, 5 mm Reach, AlTiN
Item: AA6NPYModel: MMBM-006-5XCross Ref: 14K333
7 In Stock
0.58 mm
5 mm
Ships within 2 days via
€63.10 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | End Mill |
| Chip Breaker | No |
| Coolant Fed | Non Coolant Through |
| Cutter Dia. | 0.6 mm |
| Cutting Direction | Right Hand |
| Cutting Length | 0.6 mm |
| Cutting Type | Center |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Material | Carbide |
| End Mill Style | Ball Nose |
| End Type | Single End |
| Finish | AlTiN |
| Finish-machining | AlTiN |
| Helix Angle | 30° |
| Material | Carbide |
| Material Grade | Grade C2 Micro Grain |
| Material-machining | Carbide |
| Measurement System | Metric |
| Milling Dia. | 0.60mm |
| Milling Dia. | 0.6 mm |
| Neck Dia. | 0.58 mm |
| Neck Length | 5 mm |
| No. Of Flutes | 2 |
| Overall Length | 50 mm |
| Primary Material Application Iso Code | H, M, P, S |
| Reach | 5 mm |
| Shank Dia. | 4 mm |
| Shank Type | Straight |
| Shank Type-machining | Straight |
| Single End/double End | Single End |
| System Of Measurement | Metric |
| Type | Finishing |
Shipping Info:
| Ship weight (kg) | 0.01 |
| Ship height (cm) | 0.41 |
| Ship length (cm) | 5 |
| Ship width (cm) | 0.41 |
| HS code | 8207703030 |
| Country of Origin | US |
Product Variants
| Model | Overall Length | Cutting Length | End Type | Milling Dia. | End Mill Application | Neck Dia. | Neck Length | Finish | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| MMBM-003-3 | 50 mm | 0.3 mm | Single End | 0.3 mm | Finishing | 0.28 mm | 2.7 mm | Uncoated | €100.85 | |
| MMBM-003-3X | 50 mm | 0.3 mm | Single End | 0.3 mm | Finishing | 0.28 mm | 2.7 mm | AlTiN | €106.30 | |
| MMBM-004-3 | 50 mm | 0.4 mm | Single End | 0.4 mm | Finishing | 0.38 mm | 2.6 mm | Uncoated | €86.84 | |
| MMBM-004-3X | 50 mm | 0.4 mm | Single End | 0.4 mm | Finishing | 0.38 mm | 2.6 mm | AlTiN | €92.20 | |
| MMBM-004-8 | 50 mm | 0.4 mm | Ball Nose | 0.4 mm | Finishing | 0.38 mm | 8 mm | Uncoated | €86.84 | |
| MMBM-004-8X | 50 mm | 0.4 mm | Single End | 0.4 mm | Finishing | 0.38 mm | 7.6 mm | AlTiN | €92.20 | |
| MMBM-005-10 | 50 mm | 0.5 mm | Single End | 0.5 mm | Finishing | 0.48 mm | 9.5 mm | Uncoated | €78.21 |
Explore Products
- FSI F-HVF3101 Oil Indirect Fired Air Heater 300000 Btu
- HUBBELL WIRING DEVICE-KELLEMS HBL2730SR2 Semi Flush Receptacle, 2-Gang, 30A, 3-Phase, Delta, 480VAC, 3-Pole
- HUB CITY 0250-47275
- CLEVELAND C33180 Square End Mill, Center Cutting, 4 Flutes, 1 Inch Milling Dia, 1 7/8 Inch Cut
- KERN AND SOHN 354-036 Weight Set, M2, 1 g - 100 g, Knob, Stainless Steel Fine Turned, Aluminium Case
- WEATHERHEAD 7315X08X12 Connector, Straight Adapter, Compression X Morb 4500 PSI
- KEO 10550 Drill/countersink 60 Degrees #5 7/16in Lh
- GATES 8/BX112 Cogged V-Belt, 114.827 Inch Length, 0.46 Inch Thickness
Explore More
- KEYSHAFT
- Tip Out Bins
- Portable Gas Engine Air Compressors
- Soapstones
- Outdoor LED Message Displays
- Drum Carrier/Rotator
- CONDOR Chemical Resistant Gloves, 15 Mil Thick, Diamond, Green
- KEO Kounterbore Sets
- MUELLER INDUSTRIES 764 Carbon Steel Y Strainers
- ANVIL AS150S Series Channels With Long Slots
- HALLOWELL Antimicrobial Wardrobe Locker
- KETT TOOLS Scissor Shear Heads
- BALDOR MOTOR Permanemt Magnet SCR Drive Motors, Metric, Flange B14 Face Mount
- CASH VALVE Vacuum Valves, Type D-51
- SIOUX CHIEF HydraRester Water Hammer Arresters, MIP
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
MICRO 100 MMBM-006-5X Ball End Mill, 0.6 mm Cutter Dia, 2 Flute, 5 mm Reach, AlTiN
€63.10 /unit