MICRO 100 MEF-093-125-005 End Mill, 0.0938 Inch Cutter Dia., 0.125 Inch Length of Cut, 0.005 Inch Corner Radius
Get it by Monday, Feb 23
€ 24,99 Flat Shipping + VAT € 24,99 flat shipping is applicable on orders with an aggregate weight less than 10kg. Orders exceeding 10kg will be charged default shipping rates.
5.00% off
€53.60 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | End Mill |
| Cast Iron (k) Compatibility | Yes |
| Corner Radius | 0.005" |
| Cutter Dia. | 0.0938" |
| Cutting Direction | Right Hand |
| Cutting Length | 1/8" |
| Cutting Type | Center Cutting |
| Dimension Type | Decimal Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing, Roughing |
| End Mill Style | Corner Radius |
| End Type | Single End |
| Finish | Bright, Uncoated |
| Finish - Machining | Bright (Uncoated) |
| Grade | Grade AAA |
| Hardened Compatibility | Yes |
| Helix Angle | 20° |
| List Number | MEF |
| Loc Multiple | 1.4x |
| Material | Carbide |
| Material Grade | Grade AAA |
| Milling Dia. | 3/32" |
| Non Ferrous (n) Compatibility | Yes |
| Number Of Flutes | 2 |
| Overall Length | 1 1/2" |
| Primary Material Application | Nickel, Titanium |
| Primary Material Application Iso Code | S |
| Product Datasheet | micro-100-mef-015-023-002k.pdf |
| Shank Dia. | 1/8" |
| Shank Type | Straight |
| Single End/double End | Single End |
| Stainless (m) Compatibility | Yes |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | Yes |
| System Of Measurement | Imperial |
Shipping Info:
| Ship height (cm) | 0.32 |
| Ship length (cm) | 3.81 |
| Ship width (cm) | 0.32 |
| Country of Origin | US |
Documentation:
Product Variants
| Model | Overall Length | Cutting Length | Neck Dia. | Corner Radius | End Mill Style | Milling Dia. | End Mill Application | Finish | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| MEF-062-750-005K | 2" | 0.094" | 0.058" | 0.005" | Corner Radius | 1/16" | Roughing/Finishing | nACRo | €102.20 | |
| MEF-062-093-015K | 1 1/2" | 0.094" | 3/64" | 1/64" | Corner Radius | 1/16" | Roughing/Finishing | nACRo | €64.69 | |
| MEF-062-750-015K | 2" | 0.094" | 3/64" | 1/64" | Corner Radius | 1/16" | Roughing/Finishing | nACRo | €90.50 | |
| MEF-062-750-010K | 2" | 0.094" | 3/64" | 0.01" | Corner Radius | 1/16" | Roughing/Finishing | nACRo | €90.50 | |
| MEF-062-093-010K | 1 1/2" | 0.094" | 3/64" | 0.01" | Corner Radius | 0.062" | Roughing/Finishing | nACRo | €58.08 | |
| MEF-062-350-015K | 1 1/2" | 0.094" | 3/64" | 1/64" | Corner Radius | 1/16" | Roughing/Finishing | nACRo | €71.22 | |
| MEF-062-093-005K | 1 1/2" | 0.094" | 3/64" | 0.005" | Corner Radius | 1/16" | Roughing/Finishing | nACRo | €64.32 |
Explore Products
- EATON M4CS Cell Switch Kit, For Use With Universal, Narrow Frame Mwi, Iec Air Circuit Breaker
- GRAINGER 7274_60_0 Stainless Steel Rod 17-4, 1 1/16 Inch Outside Dia, 5 Ft Overall Length
- OSG HP258-1248 Taper Length Drill Bit, 1/8 Inch Drill Bit Size, 36 mm Flute Length, 4 mm Shank Dia
- WINTERS INSTRUMENTS PFP1097ZR Ss 4 Inch, 0-300 Psi/Kpa 1/4 Inch, Npt Back With Stabilizr
- WINSMITH E17XDVS3X000A8 Gear Reducer, Double Worm Gear, Solid Input Shaft
- BELL & GOSSETT P58663 Impeller, In-Line Circulating Pumps, Bronze
- OHAUS 30400262 Large 3 Prong Sleeves, Sleeve, Accessory, 3 Prongs, Fiberglass
- WOODHEAD 1200900016 4R3P00A27C300 Male Receptacle, 3 Pole, M8 x 0.5 Thread, 22 AWG Lead, 11.81 Inch Length
Explore More
- DIAMOND VANTAGE
- INTERMATIC
- KEYSHAFT
- POSI LOCK
- MALIN CO.
- Low Voltage Thermostats
- Time Delay Relays
- Pneumatic Lockouts
- Paint Tanks and Pressure Pots
- Slump Testing
- AKRO-MILS 30174 Shelf Bins
- ML KISHIGO Economy Rainwear Set, Orange
- ASHCROFT 1188 Low Pressure Bellow Gauges, Stainless Steel
- DICKSON 8 Inch Pressure Chart Recorders
- APPROVED VENDOR Lock Screws
- WOODHEAD 120091 Series Attachable Connector
- DEWALT Bit Holders
- NORTH BY HONEYWELL NK803IN Nitri-Knit Supported Nitrile Gloves
- HOWARD LEIGHT TrustFit Plus Push-In Foam Earplugs
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
MICRO 100 MEF-093-125-005 End Mill, 0.0938 Inch Cutter Dia., 0.125 Inch Length of Cut, 0.005 Inch Corner Radius
€56.42 /unit