FREE delivery on orders over €150
MICRO 100 GEM-078-2 End Mill, 0.0781 Inch Cutter Dia., 0.188 Inch Length of Cut, 0.125 Inch Shank Dia.
Item: AA6RVBModel: GEM-078-2Cross Ref: 14T289
7 In Stock
Ships within 2 days via
10.00% off
€28.30 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | End Mill |
| Cutter Diameter | 5/64" |
| Cutting Direction | Right Hand |
| Cutting Length | 0.188" |
| Cutting Type | Center |
| Drilling Tool Configuration | Individual |
| End Mill Application | Roughing/Finishing |
| End Mill Style | Square |
| End Type | Single End |
| Finish | Uncoated |
| Finish - Machining | Bright (Uncoated) |
| Helix Angle | 30° |
| List Number | GEM |
| Material | Carbide |
| Material Grade | Grade C2 Micro Grain |
| Milling Dia. | 5/64" |
| No. Of Flutes | 2 |
| Non Ferrous Compatibility | Yes |
| Overall Length | 1 1/2" |
| Primary Material Application | All Materials |
| Primary Material Application Iso Code | M, P, S |
| Shank Dia. | 1/8" |
| Shank Type | Straight |
| Single End/double End | Single End |
| System Of Measurement | Fractional Inch |
Shipping Info:
| Ship height (cm) | 0.32 |
| Ship length (cm) | 3.81 |
| Ship width (cm) | 0.32 |
| HS code | 8207703030 |
| Country of Origin | US |
Product Variants
| Product | Model | Overall Length | Milling Dia. | Helix Angle | List Number | Shank Dia. | Finish | Cutting Length | End Mill Application | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
GEM-140-2X | 2" | 0.141" | 30° | GEM | - | AlTiN Coat | 1/2" | Roughing/Finishing | €50.73 | |
|
GEM-140-3 | 2" | 0.141" | 30° | GEM | - | Bright | 1/2" | Roughing/Finishing | €44.41 | |
|
GEM-140-3X | 2" | 0.141" | 30° | GEM | - | AlTiN Coat | 1/2" | Roughing/Finishing | €50.40 | |
 |
GEM-140-4 | 2" | 0.141" | 30° | GEM | - | Bright | 1/2" | Roughing/Finishing | €44.41 | |
 |
GEM-140-4X | 2" | 0.141" | 30° | GEM | - | - | 1/2" | Roughing/Finishing | €49.29 | |
|
GEM-156-2 | 2" | 0.156" | 30° | GEM | - | Bright | 0.563" | Roughing/Finishing | €44.41 | |
|
GEM-156-2X | 2" | 0.156" | 30° | GEM | - | AlTiN Coat | 0.563" | Roughing/Finishing | €50.73 |
Explore Products
- ANVIL 0332516004 Nipple, SCH 40, Black, Seamless, Pipe Size 1/2", Close Length 6"
- INGERSOLL-RAND 88S45W109 Air Disc Sander, 9 Inch Pad, Arbor, Heavy Duty, 1.8 hp, 50 cfm, Two-Handed Grip, NPT
- BANJO FITTINGS M332PIE10W Cast Iron Manifold Wet Seal Pump, 10 HP Three Phase Electric Motor, 3 Inch Size
- T&S B-0308-CR-VRS Single Pantry Faucet, Deck Mt., Cerama, Lever Handle, Swivel Gooseneck
- SPEARS VALVES 340-100189 Elbow, 11-1/4 Deg., Gasket x Spigot, Class 160, 12 Size, PVC
- VULCAN HART 00-852999 System, Vulcan Ar-X 9797-77
- WATTS SAD757-OSY-CFM 8 0111952
- GRAINGER WMP-TT073-BK Wire Shopping Cart, 300 lb Load Capacity, Steel, 28 Inch Overall Length
Explore More
- ARH
- EXTRACT-ALL
- KEYSHAFT
- VAL-MATIC
- TORQUE TRANSMISSION
- Water Heater Accessories
- Work Platforms
- HID Fixture Accessories
- Copper Rod Stock
- Automotive Wire and Cable
- PYRAMEX PMXTREME Half Frame Eyewears
- JOHN GUEST Swivel Male Elbows, BSPT Thread, Acetal Gray
- KEO Combined Drill And Countersink Sets
- MUELLER INDUSTRIES 722G Ductile Iron Triple Duty Control Check Valves
- E JAMES & CO Rubber Sheet, General Purpose, 60A
- EKLIND Hex Key 9 Inch Length
- LINN GEAR Mill and Engineering Chain Sprockets, H130 Mill Chain
- BROWNING J Type, Quick Disconnect Bushings
- MORSE DRUM Kits
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
MICRO 100 GEM-078-2 End Mill, 0.0781 Inch Cutter Dia., 0.188 Inch Length of Cut, 0.125 Inch Shank Dia.
€31.45 /unit