MICRO 100 DMM-040-290 Drill Point End Mill
Get it by Tuesday, Feb 17
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Carbide End Mill |
| Cutting Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Cutting Length | 11 mm |
| Cutting Type | Center Cutting |
| Diameter | 4 mm |
| Dimension Type | Metric |
| Drilling Tool Configuration | Individual |
| End | 90° |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Drill |
| End Type | Single End |
| Finish | Uncoated |
| Finish - Machining | Bright (Uncoated) |
| Grade | Grade C2 |
| Helix Angle | 30° |
| Included Angle | 90° |
| List Number | DMM |
| Material | Carbide |
| Material - Machining | Carbide |
| Material Application | Alloy Steels, Nickel, Stainless Steels, Titanium, Tool Steel |
| Milling Dia. | 4.00mm |
| Milling Dia. | 4 mm |
| Number Of Flutes | 2 |
| Overall Length | 50 mm |
| Primary Material Application | Aluminum, Brass, Bronze, Copper, Magnesium, Steel |
| Shank Dia. | 4 mm |
| Single End/double End | Single End |
| System Of Measurement | Metric |
| Type | Drill Mill |
Shipping Info:
| Ship weight (kg) | 0.01 |
| Ship height (cm) | 0.64 |
| Ship length (cm) | 5.72 |
| Ship width (cm) | 0.64 |
| HS code | 8207703030 |
| Country of Origin | US |
Product Variants
| Product | Model | Overall Length | Cutting Length | Included Angle | End Type | Milling Dia. | Finish | Grade | Number Of Flutes | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
DM-125-290 | 1 1/2" | 1/2" | 90° | Single End | 1/8" | Uncoated | - | - | €35.20 | |
 |
DM-125-290X | 1 1/2" | 1/2" | 90° | Single End | 1/8" | AlTiN Coat | - | - | €38.05 | |
 |
DM-125-490 | 1 1/2" | 1/2" | 90° | Single End | 1/8" | Uncoated | - | - | €37.25 | |
 |
DM-125-490X | 1 1/2" | 1/2" | 90° | Single End | 1/8" | AlTiN Coat | - | - | €39.69 | |
|
DM-187-290 | 2" | 5/8" | 90° | Single End | 3/16" | Uncoated | - | - | €46.47 | |
|
DM-187-290X | 2" | 5/8" | 90° | Single End | 3/16" | AlTiN Coat | - | - | €52.06 | |
|
DM-187-490 | 2" | 5/8" | 90° | Single End | 3/16" | Uncoated | - | - | €51.95 |
Explore Products
- GRAINGER 800610-20-PK50 Hex Drive Threaded Insert, 1mm Thread Size, 20mm Insert Lg., Not Gr., Zn Alloy, 11.5mm Insert Dia., 9.1186mm Max. Hole Dia., Flush Flange
- KELCH 697.0204.321 Collet Chuck, Taper Size HSK50A, Projection 100 mm, ER25
- REGAL 050887AM94 End Mill With Alcrona Coated, Double End, 3/16 Inch Dia., 2-3/4 Inch Length, 2 Flutes
- WARING COMMERCIAL CAC93XI-06 Container, 48 Oz, Copolyester, Blue
- DBI-SALA 70007409868 1104780 Harness, Xs
- WEG 00509ST3QIE254T-W22 12385054 Severe Duty Motor, 5 HP, 8 Poles, 254/6T Frame, 3 Phase, 460 V, 60 Hz, IC411-TEFC, Foot Mounted
- GRAINGER 19240_36_0 Alloy Steel Rectangular Bar, 0.5 Inch Thick
- HAYWARD TC1250SE Check Valve Pvc 2-1/2 Inch Skt
Explore More
- KEYSHAFT
- LARSON ELECTRONICS LLC
- FAST FUNNEL
- SECPRO
- BLU-MOL
- Laboratory Storage
- Logistics Straps
- Motion Sensor Accessories
- Polyethylene Tube Fittings
- Drum Carrier/Rotator
- CONDOR General Purpose Gloves, Black, Rough Latex
- DESTACO 2007 Series Vertical Hold Down Clamps, U Bar
- ANVIL AS200KO Series Channels With Knock Out
- APPROVED VENDOR Triangle Sanding
- GRAINGER Float Valves
- DESTACO 341 Series Pull Action Latch Clamps
- GEARWRENCH Filters
- MACROMATIC TD-7 Series Time Ranger Digital-Set Programmable Relays
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
MICRO 100 DMM-040-290 Drill Point End Mill