FREE delivery on orders over €150
M A FORD 30201200 Micro Drill Bit, #83 Drill Bit Size, 1/8 Inch Shank Dia, 1 1/2 Inch Overall Length
Item: CT2AAJModel: 30201200Cross Ref: 794MG3
7 In Stock
Ships within 2 days via
10.00% off
€16.75 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Micro Drill Bit |
| Circuit Board Drill | Yes |
| Coolant Fed | Non Coolant Through |
| Cutting Direction | Right Hand |
| Decimal Equivalent | 0.012 |
| Depth X Dia. Ratio | 14xd |
| Drill Bit Point Angle | 130° |
| Drill Bit Point Type | 4 Facet Point |
| Drill Bit Size | #83 |
| Drill Diameter Tolerance | -0.0005" to 0" |
| Finish | Bright, Uncoated |
| Finish - Machining | Bright (Uncoated) |
| Flute Length | 0.19" |
| Flute Type | Helical |
| Grade | General Purpose |
| Helix Angle | 35° |
| Material | Carbide |
| Material - Machining | Carbide |
| Material Grade - Machining | General Purpose |
| Max. Drilling Depth | 0.172" |
| Measurement System | Wire |
| Number Of Coolant Holes | 0 |
| Number Of Flutes | 2 |
| Overall Length | 1 1/2" |
| Primary Material Application | Cast Iron, Non-Ferrous, Steel |
| Primary Material Application Iso Code | K, N, O, P |
| Secondary Material Application | Alloy Steel, Cast Iron, Die Steel, Hardened Steel, Non Ferrous, Stainless Steel, Titanium |
| Secondary Material Application Iso Code | H, K, M, N, P, S |
| Shank Dia. | 1/8" |
| Shank Length | 1.31" |
| Shank Type | Straight |
| Shank Type - Machining | Straight |
| Spiral Direction | Right Hand |
| Web Construction | Four Facet Point |
| Web Thinning | Four Facet Point |
Shipping Info:
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
Product Variants
| Model | Decimal Equivalent | Overall Length | Shank Dia. | Drill Bit Size | Max. Drilling Depth | Price | |
|---|---|---|---|---|---|---|---|
| MXDCLM0100A | 0.0394 | 60 mm | 3 mm | 1 mm | 14.5 mm | €171.18 | |
| MXDCLM0110A | 0.0433 | 60 mm | 3 mm | 1.1 mm | 16.36 mm | €171.18 | |
| MXDCLM0120A | 0.0472 | 65 mm | 3 mm | 1.2 mm | 18.21 mm | €171.18 | |
| MXDCLM0130A | 0.0512 | 65 mm | 3 mm | 1.3 mm | 19.05 mm | €171.18 | |
| MXDCLM0140A | 0.0551 | 65 mm | 3 mm | 1.4 mm | 20.9 mm | €171.18 | |
| MXDCLM0150A | 0.0591 | 65 mm | 3 mm | 1.5 mm | 21.74 mm | €171.18 | |
| MXDCLM0160A | 0.063 | 70 mm | 3 mm | 1.6 mm | 23.6 mm | €171.18 |
Explore Products
- MACROMATIC THS-1514D-35 Time Delay Relay, 12-125 VDC, 1A Normally Open
- BANJO FITTINGS VSF200FD Male Adapter, 2 x 2 FNPT
- MAIN FILTER INC. MF0599916 R39C60TV Hydraulic Filter, Wire Mesh, 60 Micron, Viton Seal, 16.65 Inch Height
- BRADY 8783-1-PK 172017 Pipe Marker, Bleach Liquor, Yellow, Black, Fits 2 1/2 to 7 7/8 Inch Pipe OD, 1 Pipe Marker
- WOODHEAD 1301020158 111U Rubber Hand Lamp with 300W, Open End Guard, Receptacle
- MERIT 08834180240 Cartridge Roll, Straight, 3/8 Inch Dia x 1 1/2 Inch Length, 1/8 Inch Pilot, Aluminum Oxide
- GROVE GEAR EL8520502.40 Solid Input Shaft Worm Gear Reducer, Hollow Bore Output Worm Gear
- GATES E1560MXL019 Square Tooth Timing Belt, 0.08 Inch Pitch, 195 Teeth
Explore More
- COOPER TOOLS
- ER TAPE
- KEYSHAFT
- CHAMBERLAIN
- OEMTOOLS
- Corrosive Cabinets
- Engine Stands and Cranes
- Soldering and Desoldering Stations
- Compressor Air Filter
- Rod Ends
- ANSELL 08-352 Alphatec Neoprene Chemical Resistant Gloves
- CONDOR General Purpose Gloves, Blue, Smooth Nitrile
- H.K. PORTER Center Cut Cutters, General Purpose
- TIVAR UHMW Sheet Stocks, Blue
- ANVIL AS711 Series Z Supports
- EATON Splicers
- MARTIN SPROCKET 5V Series Hi-Cap Wedge Stock 2 Groove QD Sheaves
- NIBCO S-221-B Series Strainers, Bronze, Wire Mesh Screen, Solid Cap
- JOMAR VALVE Builder Series Basket Strainers
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
M A FORD 30201200 Micro Drill Bit, #83 Drill Bit Size, 1/8 Inch Shank Dia, 1 1/2 Inch Overall Length
€18.61 /unit