KRUEGER B-55-.75 Barrel Level Gauge, 0.75 Inch NPT, 55 Gallon Capacity

Krueger B-55-.75 barrel level gauge is suitable for above-the-ground storage barrels to measure liquid levels. This 55-gallon drum level sensor gauge is an essential volume metre that can be easily installed.

Features:

• Krueger B-55-.75 barrel level gauge has an easily removable aluminium bushing which allows threading of the bushing into the barrel.
• It has a 3/4 inch NPT port that can read out measurements for 55-gallon barrels.
• This barrel gauge has a patented calibration assembly made of cellulose acetate plastic to tolerate high pressure.
• It features a Duro nitrile gasket, HDPE plastic assembly nut, galvanised steel & aluminium internal rods and Nitrophyl float construction for prolonged use & durability.
• This 55=gallon drum level gauge has a drum level indicator to estimate the liquid or oil level in the barrel.

Frequently Asked Questions:

Q. How do you calibrate this vertical drum level gauge?

A.

• Open the level gauge housing.
• Find the screw and spin it using an Allen key.
• Depending on the offset you want, slowly rotate either clockwise or counter-clockwise.

Q. How to install an oil drum gauge?

A.

• Unscrew the lid of the barrel.
• Extend the level arm of the flow gauge.
• Slide the gauge tube inside the barrel and attach the float to the other end of the tube.
• Ensure that the tube is plumb / vertical and firmly hand-tighten the cap nut.
• Drill a hole in each of the security housing locations.
• Insert the security screws and tighten.

Q. How does an oil drum level indicator work?

A. Oil drum gauge indicators use sensor probes to show the amount of water in a storage barrel. These probes relay data back to the control panel to set off an alert.