GROVE GEAR NH8320588.31 NH-HMQ832-100-H1-56-31 Worm Reducer, 100:1 Ratio, 0.625 Inch I.D, 1.938 Inch O.D, Cast Iron
Get it by Tuesday, Dec 23
€3,658.21 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Reducer |
| Assembly | HMQ-H1 |
| Bore Code | 31 |
| Center Distance | 3 1/4" |
| Frame | 56C |
| Gear Type | Worm |
| Gearbox Type | Worm |
| Housing Material | Cast Iron |
| Input Bore (c Face) | 5/8" |
| Input Bore Size | 5/8" |
| Input Dia. | 5/8" |
| Input Hp @ 1750 Rpm | 0.691 hp |
| Input Keyway Size (c Face) | 3/16" x 3/32" |
| Input Rpm | 1750 RPM |
| Input Style | C Face Quill |
| Material | Cast Iron |
| Max Input Hp | 691/1000 hp |
| Max. Input Hp | 0.691 hp |
| Mounting Type | Shaft Mount |
| No. Of Gear Reductions | 1 |
| Output Diameter | 1.938" |
| Output Hp | 87/200 hp |
| Output Key Size | 1/2" x 3.38" |
| Output Rpm | 17 RPM |
| Output Shaft | Hollow Bore |
| Output Shaft Assembly Code | H1 |
| Output Shaft Orientation | H1 |
| Output Shaft Thrust Rating | 2574 |
| Output Shaft Type | Hollow Shaft |
| Output Style | H1 |
| Output Torque | 1567 lbs.-in. |
| Product Line | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Reducer | Worm - Right Angle |
| Reduction Type | Single |
| Series | NH Series |
| Series Style | NH-HMQ-H1 |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Ships Factory Direct | No |
Shipping Info:
| Ship weight (kg) | 29.25 |
| Ship height (cm) | 38.1 |
| Ship length (cm) | 49.23 |
| Ship width (cm) | 38.43 |
Product Variants
| Product | Model | Output Shaft Type | Max. Input Hp | Overhung Load | Gear Ratio | Output Torque | Mounting Type | Frame | Finish | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
NH8320213.00 | Double Shaft | 11 23/25 hp | 2275 lbs. | - | 1602 lbs.-in. | Base | 180TC | - | €2,643.17 | |
|
NH8320539.28 | - | - | - | - | - | - | 56C | - | €1,930.10 | |
 |
NH8320165.00 | Double Shaft | 3.619 hp | 2275 lbs. | - | 2651 lbs.-in. | Base | 140TC | - | €2,643.17 | |
|
NH8320548.27 | - | - | - | - | 2437 lbs.-in. | - | 140TC | - | €1,930.10 | |
 |
NH8320309.00 | Right Handed Shaft | 2.462 hp | 2170 lbs. | - | 2568 lbs.-in. | Base | 210TC | - | €2,536.81 | |
 |
NH8320043.00 | Double Shaft | 5 9/50 hp | 2170 lbs. | - | 2633 lbs.-in. | Base | 56C | - | €2,643.17 | |
|
NH8320126.00 | Left Handed Shaft | 2.926 hp | 2275 lbs. | - | 2641 lbs.-in. | Base | 56C | - | €2,536.81 |
Explore Products
- 80/20 75-3405 Bolt Assembly, M6 x 12.00mm Blue BHSCS with Slide-In Economy T-Nut, Centered Thread, Bright Zinc
- RACO 768 Plaster Ring, 5/8 Inch Height, 4.50 Cu.In Capacity
- MASTERDRIVES P64-14M-115-J HTD Timing Pulley, 14m Size
- MASTER APPLIANCE 35001 Cord
- E JAMES & CO CSEPDM-3/4-25 Rubber Cord Epdm 3/4 Inch Diameter 25 Feet
- KM SYSTEMS KM50TSMDPNN1506 Insert
- BALDOR / DODGE M7H19T36C6018 MTA Size 7315,19:1,360 C-Face, CEM4314T
- TITAN FASTENERS APH66
Explore More
- EATON
- KEYSHAFT
- REFLEXITE
- SIMPSON STRONG-TIE
- HOYT
- Hose Reel Mounting Brackets
- Dryer Booster Fans
- Automated Gas Detector Test Systems
- Noise Control Accessories
- Rod Hanger Accessories
- HELICOIL Spiral Flute Taps, Bottoming, UNF, 3B
- ANSELL 80-400 Activarmr Blue Yellow Natural Rubber Latex Coated Gloves
- JOHN GUEST Stem Adapters, BSPP Thread, Acetal Gray
- ANVIL C120 Series Cable Studs
- ANVIL AS606 Series 3-Hole Corner Angle
- OSG 16505 Spiral Flute Tap
- VERMONT GAGE Go Standard Thread Plug Gages, 3/4-10 Unc
- MAGLINER Straps
- GRAINGER Dielectric Pipe Nipples
- DAYTON Snap Rings
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
GROVE GEAR NH8320588.31 NH-HMQ832-100-H1-56-31 Worm Reducer, 100:1 Ratio, 0.625 Inch I.D, 1.938 Inch O.D, Cast Iron
€3,658.21 /unit