GROVE GEAR NH8240185.00 NH-BMQ824-20-L-140 Worm Reducer, 20:1 Ratio, 0.875 Inch I.D, 1 Inch O.D, Cast Iron
Get it by Tuesday, Sep 1
€1,462.36 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Reducer |
| A | 2.94 |
| Aj | 5.88 |
| Assembly | BMQ-L |
| B | 5.25 |
| Be | 0.38" |
| Bf | 0.41 |
| C | 6 22/25" |
| Center Distance | 2.38" |
| D | 2.69 |
| F | 2.13 |
| Frame | 140TC |
| G | 1.06 |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| Gearbox Type | Worm |
| Gross Weight | 0 lbs. |
| Housing Material | Cast Iron |
| I | 3.77" |
| Input Bore (c Face) | 7/8" |
| Input Bore Size | 7/8" |
| Input Dia. | 7/8" |
| Input Hp | 2.326 hp |
| Input Hp @ 1750 Rpm | 2.326 hp |
| Input Keyway Size (c Face) | 3/16" x 3/32" |
| Input Speed | 1750 RPM |
| Input Style | C Face Quill |
| Input Type | C-Face Quilled |
| J | 4" |
| K | 2" |
| Lq | 4.63" |
| Material | Cast Iron |
| Max. Ohl (output Shaft) | 1300 |
| Max. Thrust Load (output Shaft) | 2091 |
| Mounting Type | Base |
| N | 4.88 |
| No. Of Gear Reductions | 1 |
| O | 2.91" |
| Output | Left |
| Output Dia. | 1" |
| Output Hp | 1.972 hp |
| Output Key Size | 1/4" x 1 3/4" |
| Output Shaft | Solid Shaft |
| Output Shaft Assembly Code | L |
| Output Shaft Dia. | 1" |
| Output Shaft Direction | Left |
| Output Shaft Orientation | L |
| Output Shaft Thrust Rating | 2091 |
| Output Shaft Type | Left Handed Shaft |
| Output Speed | 87.5 RPM |
| Output Style | L |
| Output Torque | 1421 lbs.-in. |
| Output Type | Solid Shaft |
| Overhung Load | 1770 lbs. |
| Overhung Load Rating | 1300 lbs. |
| Paint/coating | Blue |
| Product Line | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Reduction | Single |
| Reduction Type | Single |
| Rq | 4.09" |
| Series | NH Series |
| Series Style | NH-BMQ-L |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Speed | 87 RPM |
| Tap Depth | 0.69" |
| Tap Size | 3/8"-16 |
| Thread Type | Coarse |
Shipping Info:
| Ship weight (kg) | 17.1 |
| Ship height (cm) | 26.67 |
| Ship length (cm) | 27.15 |
| Ship width (cm) | 23.01 |
Product Variants
| Product | Model | Output Hp | Output Speed | Output Torque | Max. Input Hp | Output Dia. | Input Dia. | Input Style | Paint/coating | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
NH8240165.00 | 0.795 hp | 35 RPM | 1432 lbs.-in. | 1.137 hp | 1" | 5/8" | C Face Quill | Blue | €1,462.36 | |
|
NH8240166.00 | 82/125 hp | 29.2 RPM | 1418 lbs.-in. | 0.967 hp | 1" | 5/8" | C Face Quill | Blue | €1,462.36 | |
|
NH8240184.00 | 2.439 hp | - | - | 2.765 hp | 1" | 7/8" | C Face Quill | Blue | €1,462.36 | |
 |
NH8240149.00 | 1.972 hp | 87.5 RPM | 1421 lbs.-in. | 2.326 hp | 1" | 5/8" | C Face Quill | Blue | €1,462.36 | |
|
NH8240588.23 | - | - | - | - | - | - | - | - | €1,089.02 | RFQ
|
|
NH8240207.00 | 3.253 hp | 175 RPM | 1172 lbs.-in. | 3.564 hp | 1" | 7/8" | C Face Quill | Blue | €1,534.30 | |
|
NH8240197.00 | 1.972 hp | 87.5 RPM | 1421 lbs.-in. | 2.326 hp | 1" | 7/8" | C Face Quill | Blue | €1,462.36 |
Explore Products
- SPEARS VALVES G0302-002BL Low Extractable Gauge Guard, EPDM, 1/4 Size, 0-30 PSI Gauge
- KEO 93990 Keyseat Cutter Carbide Tip 5/8 #305 Stag
- HOFFMAN P2BGPV68 31058 Vented Gland Plate, 600 x 800mm Size, Steel, Gray
- EATON XTAR040D11W016 Reversing Electronic Motor Starter, 40 A, Top-Mounted, 42 V 50 Hz, 48 V 60 Hz, 12-16 A
- 3M 7100315106 UU012807317 / 62753 Microfinishing Film Roll 372L, 30 Mic, 1.043 Inch X 600 Ft X 3 Inch, Plastic Core, ASO, End Roll Mark Black
- SMC VALVES CDQ2B140TF-10DCZ Compact Cylinder, 140Mm Bore Size, 10 Mm Stroke Length
- APPROVED VENDOR 2TYH4 Portable Cord Seow 6/3 Awg 250ft Black
- PARKER 0.75DPSRM02.25 Pneumatic Actuator
Explore More
- ADD-A-LEVEL
- CANTEX
- KEYSHAFT
- MEDIFY AIR
- IRON HORSE
- Engraving Pens
- Digital Panel Meters
- Hedge Trimmers
- Vibratory Tumblers
- Wire Connector Kits
- ANSELL 28-507 Activarmr Nitrile Coating Cut Resistant Gloves
- CHICAGO PROTECTIVE APPAREL CarbonX Active Crew Neck Shirts
- CONDOR ANSI Cut Level A3 Cut-Resistant Sleeves
- KEO Combined Drills And Countersinks, Plain Type, 82 Degrees Countersink Angle
- GLOBE SCIENTIFIC Tri-Corner Beakers
- EAZYPOWER Impact Nutsetters
- APPROVED VENDOR 0.4mm Thickness Stainless Steel External Retaining Rings
- HUB CITY M2 Series Bevel Gear Drives
- METRO Rubber Tread Standard Wheels
- GRAINGER Balls
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
GROVE GEAR NH8240185.00 NH-BMQ824-20-L-140 Worm Reducer, 20:1 Ratio, 0.875 Inch I.D, 1 Inch O.D, Cast Iron
€1,462.36 /unit