GROVE GEAR NH8180577.16 NH-HMQ818-20-H1-48-16 Worm Reducer, 20:1 Ratio, 0.5 Inch I.D, 1 Inch O.D, Cast Iron
Get it by Friday, Dec 19
€1,517.11 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Reducer |
| Assembly | HMQ-H1 |
| Bore Code | 16 |
| Center Distance | 1 3/4" |
| Frame | 48CZ |
| Gear Type | Worm |
| Gearbox Type | Worm |
| Housing Material | Cast Iron |
| Input Bore (c Face) | 1/2" |
| Input Bore Size | 1/2" |
| Input Dia. | 1/2" |
| Input Hp @ 1750 Rpm | 1 23/500 hp |
| Input Keyway Size (c Face) | 1/8" x 1/16" |
| Input Rpm | 1750 RPM |
| Input Style | C Face Quill |
| Material | Cast Iron |
| Max Input Hp | 1 23/500 hp |
| Max. Input Hp | 1 23/500 hp |
| Mounting Type | Shaft Mount |
| No. Of Gear Reductions | 1 |
| Output Diameter | 1" |
| Output Hp | 7/8 hp |
| Output Key Size | 1/4" x 2.5" |
| Output Rpm | 87 RPM |
| Output Shaft | Hollow Bore |
| Output Shaft Assembly Code | H1 |
| Output Shaft Orientation | H1 |
| Output Shaft Thrust Rating | 1144 |
| Output Shaft Type | Hollow Shaft |
| Output Style | H1 |
| Output Torque | 630 lbs.-in. |
| Product Line | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Reducer | Worm - Right Angle |
| Reduction Type | Single |
| Series | NH Series |
| Series Style | NH-HMQ-H1 |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Ships Factory Direct | No |
Shipping Info:
| Ship weight (kg) | 9.45 |
| Ship height (cm) | 26.67 |
| Ship length (cm) | 27.15 |
| Ship width (cm) | 23.01 |
Product Variants
| Product | Model | Max. Input Hp | Output Shaft Type | Overhung Load | Output Torque | Mounting Type | Frame | Finish | Gear Type | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
NH8180087.00 | 1 5/8 hp | Right Handed Shaft | 1200 lbs. | 528 lbs.-in. | Base | 140TC | - | Worm | €1,090.12 | |
 |
NH8185043.00 | - | - | - | - | - | - | - | - | €693.26 | |
|
NH8185008.00 | 0.741 hp | - | 1250 lbs. | 614 lbs.-in. | - | 56C | - | Worm | €693.26 | |
|
NH8185022.00 | - | - | 1250 lbs. | 571 lbs.-in. | - | - | Painted | - | €792.50 | RFQ
|
 |
NH8180138.00 | 0.884 hp | Double Shaft | 1200 lbs. | 644 lbs.-in. | Base | 56C | - | Worm | €1,144.85 | |
 |
NH8185001.00 | 1 28/125 hp | - | 1250 lbs. | 1318 lbs.-in. | Torque Limiting Design | 56C | - | Worm | €999.19 | |
|
NH8180248.00 | 0.609 hp | Double Shaft | 1200 lbs. | 634 lbs.-in. | Base | 48CZ | - | Worm | €1,144.85 |
Explore Products
- GRAINGER BULK-RS-H40-738 Buna-N Strip, 4 Inch X 10 Ft, 0.03125 Inch Thickness, 40A
- CINCINNATI FAN F353J5
- EATON XTAR018C21BD001 Reversing Electronic Motor Starter, 18 A, 200-240 Vdc, 2No-2No, C Frame, 45 mm, 0.6-1 A
- WRIGHT TOOL 84929 Deep Impact Socket, 1-1/2 Inch Drive, 6 Point, 1-13/16 Inch Size
- FEIN POWER TOOLS 63135508021 Uni Carbide Tip, 2 x 1 3/8 Inch Size
- VULCAN HART 00-423896-00001 Display Assembly
- GENERAL PIPE CLEANERS 122030 75EM4 Cable, With Male And Female Connector, 5/8 Inch Size, 75 Feet Length
Explore More
- CH HANSON
- INSINKERATOR
- KEYSHAFT
- TYDENBROOKS
- FORMSPRAG
- Arbor and Mandrel Mount Sanding Discs
- Relief Valves
- Routing End Mills
- Structural and Spud Wrenches
- Multihead Operators
- CONDOR Nitrile Coated Cut Resistant Gloves, Cut Level A4
- SALISBURY Class 0 Electrical Insulating Rubber Gloves, 11 Inch, Red
- KRYTOX GPL 223 Series Anti Corrosion Grease
- KEO Woodruff Keyseat Cutter Sets
- RUD CHAIN B-ABA Lifting Points
- APPROVED VENDOR Tri Clover Compatible Ferrules 304 Stainless
- VERMONT GAGE NoGo Standard Thread Plug Gages, 1/2-20 Unf Lh
- ML KISHIGO Contrasting Mesh Breakaway Vests, Lime
- JUSTRITE Oil Only Sorbent Pads, Laminated SMS
- SPEEDAIRE Wheels
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
GROVE GEAR NH8180577.16 NH-HMQ818-20-H1-48-16 Worm Reducer, 20:1 Ratio, 0.5 Inch I.D, 1 Inch O.D, Cast Iron
€1,517.11 /unit